Parts Manual fo
r
N
V
E
V
21" CAST DECK WALK BEHIND MOWER
EUROPEA
SERIES 2
MODEL
ELP21502KW
ELP21602
ELP21602
ELP216752B
ELP21702BV
COPYRIGHT ©2005
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
Revision 5,
McDonough, GA, 30253 U.S.A.
7/28/2005
Manual No. 7006202
TP 400-5076-5-WB-N
s
PAGE GROUP
4
6
10
14
16
18
20
22
24
26
HANDLES AND CONTROLS (2001 Model Year)
HANDLES AND CONTROLS (2002 & Later Model Year)
CUTTING DECK, BLADE
WHEELS, FRONT & REAR
AXLE/TRANSMISSION ASSEMBLY
DISCHARGE COMPONENTS
DECALS
ELECTRIC START COMPONENTS
BATTERY & COMPONENTS
WIRING SCHEMATIC
Table Of Content
SERIES 2
Manual No. 700620221" CAST DECK WALK BEHIND MOWER
3
TP 400-5076-5-WB-N
HANDLES AND CONTROLS (2001 Model Year)
Manual No. 7006202 21" CAST DECK WALK BEHIND MOWER
TP 400-5076-5-WB-N
4
SERIES 2
HANDLES AND CONTROLS (2001 Model Year)
p
y
Part No Descri
1 7035954 1 CONTROL, Blade (ELP21502KWV)
1 7041734 1 CONTROL, Blade (ELP21602 & ELP21602E)
2 7028815 1 WELDMENT, Ground Speed Control (Coated)
3 7091645 1 PIN, 5/16 x 1-7/16” Clevis
4 7029036 1 CONTROL, Engine Speed (+49.8/1.41”) used on ELP21602 &
4 7026467 1 CONTROL, Engine Speed (+49/2”) used onELP21502KWV
5 7028396 1 KNOB, Engine Speed & Ground Speed Control
6 7029431 1 DECAL, (OPC) Operator Presence Control
7 7029432 1 DECAL, Ground Drive, (Cast Al Comm)
8 7091076 6 WASHER, 5/16” Flat
9 7091644 1 PIN, 5/16 x 1-3/4” Clevis
10 7028886 1 CONTROL, Ground Speed (+56/1.85”)
11 7026216 1 GRIP, Foam (7/8” I.D. x 21-1/2” long) used on ELP21502KWV
11 7074422 1 GRIP, Foam (1” x 21-1/2” long) used on ELP21602 &
12 7091251 2 SCREW, 1/4-20 x 2-1/2” Hex Head Cap, GR 5
13 7028803 1 *CABLE ASSEMBLY, Blade Control (48.88” long) used on ELP21602 &
13 7028883 1 *CABLE ASSEMBLY, Blade Control (51.97” long) used on ELP21502KWV
14 7023153 1 CLAMP, Engine Speed (3-Speed Control)
15 7023154 1 SCREW, #10-32 x 5/8” Slotted Hex Head, Self-Tap
16 7035744 2 KNOB, 5/16-18 Thread
17 7090391 4 WASHER, 5/16” Internal Tooth Lock
18 7091646 4 NUT, 5/16-18 Hex Nyloc
19 7026436 1 CLAMP, Double Tube
20 7011791 1 RETAINER, 5/16” Bolt (Black)
21 7034329 2 BRACKET, Handle (Black)
21 7034848 2 BRACKET, Handle (Yellow Chromate)
22 7091189 2 SCREW, 5/16-18 x 2” Square Neck Curved Head
23 7076978 4 NUT, 1/4-20 Hex Nyloc
24 7046995 1 HANDLE, Upper (ELP21502KWV)
24 7040950 1 HANDLE, Upper (ELP21602 & ELP21602E)
25 7046465 2 GUIDE, Rope (1/4-20 thread)
26 7024641 4 TIE, Wire 1.29” long (Black)
27 7073821 3 PIN, Bow-Tie Locking Cotter
28 7046518 1 CABLE, Traction Adjustable (51.20/6.38”)
29 7091075 5 SCREW, #10-24 x 5/8” Hex Washer Self-Tap
30 7091702 2 WASHER, 3/16” Flat
31 7026219 4 CLAMP, 7/8” Double Cable
tionItem Qt
Note
ELP21602E
ELP21602E
ELP21602E (Snapper P/N &
Rev. # stamped on cable)
(Snapper P/N & Rev. # stamped
on cable)
Footnotes:
*NOTE: Snapper part number and revision level is stamped into cable
Manual No. 700620221" CAST DECK WALK BEHIND MOWER
SERIES 2
5
TP 400-5076-5-WB-N
HANDLES AND CONTROLS (2002 & Later Model Year)
Manual No. 7006202 21" CAST DECK WALK BEHIND MOWER
TP 400-5076-5-WB-N
6
SERIES 2
HANDLES AND CONTROLS (2002 & Later Model Year)
p
y
Part No Descri
1 7035954 1 CONTROL, Blade (ELP21502KWV)
1 7041734 1 CONTROL, Blade (ELP21602 & ELP21602E)
2 7028815 1 WELDMENT, Ground Speed Control (Coated)
3 7091645 1 PIN, 5/16 x 1-7/16” Clevis
4 7029036 1 CONTROL, Throttle (+49.8/1.41”) (ELP216752BV)
4 7075712 1 CONTROL, Throttle (+49.8/2.62”) (ELP21702BV)
5 7023655 1 KNOB, Engine Speed & Ground Speed Control
6 7029431 1 DECAL, (OPC) Operator Presence Control
7 7029432 1 DECAL, Ground Drive, (Cast Al Comm)
8 7091076 6 WASHER, 5/16” Flat
9 7091644 1 PIN, 5/16 x 1-3/4” Clevis
10 7028886 1 CONTROL, Ground Speed (+56/1.85”)
11 7026216 1 GRIP, Foam (7/8” I.D. x 21-1/2” long)
12 7091732 2 SCREW, 1/4-20 x 2-3/4” Hex Head Cap, GR 5
13 7074451 1 *CABLE ASSEMBLY, Blade Control (49.09” long) used on ELP216752BV
13 7074923 1 *CABLE ASSEMBLY, Blade Control (51.39” long) used on ELP216752BV
14 7023153 1 CLAMP, Engine Speed (3-Speed Control)
15 7023154 1 SCREW, #10-32 x 5/8” Slotted Hex Head, Self-Tap
16 7091017 1 SCREW, #8-32 x 3/8” Pan Head Cross Recess
17 7090391 2 WASHER, 5/16” Internal Tooth Lock
18 7091646 4 NUT, 5/16-18 Hex Nyloc
19 7026436 1 CLAMP, Double Tube
20 7011791 1 RETAINER, 5/16” Bolt (Black)
21 7034329 2 BRACKET, Handle (Black)
21 7034848 2 BRACKET, Handle (Yellow Zinc Chromate)
22 7091190 4 BOLT, 5/16-18 x 1-1/2” Curved Head Carriage, GR 2
23 7076978 4 NUT, 1/4-20 Hex Nyloc
24 7034786 1 HANDLE, Upper
25 7022779 1 GUIDE, Pull Rope
26 7024641 4 TIE, Wire 1.29” long (Black)
27 7073821 3 PIN, Bow-Tie Locking Cotter
28 7046518 1 CABLE, Traction (Adjustable) (51.20/6.38”)
29 7091075 5 SCREW, #10-24 x 5/8” Hex Washer Self-Tap
30 7091702 2 WASHER, 3/16” Flat
31 7091298 4 NUT, 5/16-18 Hex Nyloc
32 7091018 1 NUT, #8-32 Hex
33 7026219 4 CLAMP, 7/8” Double Cable
tionItem Qt
Note
(#7084716)
(#7084669)
Footnotes:
*NOTE: Snapper part number and revision level is stamped into cable
Manual No. 700620221" CAST DECK WALK BEHIND MOWER
SERIES 2
7
TP 400-5076-5-WB-N
HANDLES AND CONTROLS (2002 & Later Model Year)
Manual No. 7006202 21" CAST DECK WALK BEHIND MOWER
TP 400-5076-5-WB-N
8
SERIES 2
HANDLES AND CONTROLS (2002 & Later Model Year)
p
y
Part No Descri
34 7079577 1 SCREW, 1/4-20 x 1-1/2” Hex Head Cap, GR 5
tionItem Qt
Note
Footnotes:
*NOTE: Snapper part number and revision level is stamped into cable
Manual No. 700620221" CAST DECK WALK BEHIND MOWER
SERIES 2
9
TP 400-5076-5-WB-N
CUTTING DECK, BLADE
Manual No. 7006202 21" CAST DECK WALK BEHIND MOWER
TP 400-5076-5-WB-N
10
SERIES 2
CUTTING DECK, BLADE
p
y
Part No Descri
1 7052881 1 ASSEMBLY, Discharge Door
2 7091201 1 SCREW, #10-24 x 1-1/2” Slotted Hex Washer Head Self-Tap
3 7074124 1 COVER, Belt/Tie Bar
4 7073293 1 HOLE PLUG, Polyethylene
5 7046357 1 DECAL, Warning 1997
6 7073626 1 DECK, 21” Cast Aluminum Rocker used on ELP21602,
6 7073627 1 DECK, 21” Cast Aluminum Rocker used on ELP21602E
7 7090362 8 SCREW, 1/4-20 x 5/8” Hex Washer Self-Tap
8 7091088 3 SCREW, 3/8-16 x 2” Hex Head Self-Tap
9 7072921 1 DECAL, Warning (Deck)
10 7043835 1 BRACKET, RH Trailing Shield Pivot Rod
-- 7043836 1 BRACKET, LH Trailing Shield Pivot Rod not shown
11 7074135 1 DECAL, Sound 100 dB (Euro)
12 7029776 1 DECAL, Euro Community (CE)
13 7046714 1 LOGO, SNAPPER Cast Aluminum Series
14 7029779 1 DECAL, Spark Plug International Symbol (Euro)
15 7029784 2 DECAL,Deck/Chute International Warning (Euro)
16 7046924 1 DECAL, Chute Deflector Warning used on ELP21602,
17 7028439 1 DECAL, Convertible Mower
18 7029470 1 DECAL, Patent Numbers
19 7090055 2 WASHER, 1/4” Flat
20 7024753 1 SHIELD, Trailing used on ELP21602, ELP21602E
20 7043870 1 SHIELD, Trailing used on ELP216752BV
21 7043808 1 ROD, Trailing Shield Pivot (Long)
22 7091075 5 SCREW, #10-24 x 5/8” Hex Washer Self-Tap
23 7024595 1 BAFFLE, Discharge
24 7013010 1 DECAL, Danger, Cut Finger
24 7022841 1 DECAL, Warning (Deck) (Euro)
25 7033732 2 SUPPORT, Rear Axle
26 7029619 1 LOGO, Briggs & Stratton
27 7091214 1 KEY, Hi-Pro #HP506 (Briggs engine)
27 7010783 1 KEY, Hi-Pro #HP-505 (Kawasaki engine)
28 7015780 1 PULLEY, Traction Drive (25mm x 2-1/8” O.D.) used on ELP21602, ELP21602E
28 7021764 1 PULLEY, Traction Drive (.88 x 2.12 O.D.) used on ELP21502KWV
29 7090201 1 SCREW, 5/16-18 x 5/16” Hex Socket Set
30 7076979 2 NUT, 3/8-16 Hex Nyloc
31 7026631 1 HUB, 25 mm Blade Drive used on ELP21602, ELP21602E
tionItem Qt
Note
ELP21502KWV & ELP216752BV
ELP21502KWV & ELP216752BV
& ELP21502KWV
& ELP216752BV
& ELP216752BV
Footnotes:
*NOTE: Purchase engine components directly from engine manufacturer dealer.
Manual No. 700620221" CAST DECK WALK BEHIND MOWER
SERIES 2
11
TP 400-5076-5-WB-N
CUTTING DECK, BLADE
Manual No. 7006202 21" CAST DECK WALK BEHIND MOWER
TP 400-5076-5-WB-N
12
SERIES 2
CUTTING DECK, BLADE
p
y
Part No Descri
31 7026630 1 HUB, 7/8” I.D.Blade Drive used on ELP21502KWV
32 7026428 1 BLADE, 21” Mulching/Bagging
33 7079268 1 WASHER, 3/8” Split Lock (Heavy)
34 7090483 1 SCREW, 3/8-24 x 1-3/4 Hex Head Cap, GR 5
35 7090143 2 BOLT, 3/8-16 x 1-1/4” Hex Flange Lock
36 7091191 2 RIVET, 3/16 x 1/2” Steel
37 7033752 1 PLATE, Height Adjust
38 7091238 4 BOLT, 5/16-18 x 1” Square Neck Carriage, GR 5
39 7091892 1 PUSHNUT, 1/4” Black
40 7028454 1 DECAL, Height Control Instr. (Euro)
41 7072143 1 GUIDE, Belt
42 7016719 2 SPACER, .390 I.D. x 3/4” O.D. x 1/2” Long
43 7090613 2 NUT, 3/8-16 Hex Flange Lock
-- -- 1 *ENGINE, 6HP B&S Quantum XTL (ELP21602) Model 12H802, Type 2612, Trim
-- -- 1 *ENGINE, 6HP B&S Quantum XTL (ELP21602E) Model 12H807, Type 2610, Trim
-- -- 1 *ENGINE, 5HP Kawasaki (ELP21502KWV) Model FC150V, Type GS13
-- -- 1 *ENGINE, 6.75HP B&S Intek (ELP216752BV) Model 126602, Type 0114, or
-- -- 1 *ENGINE, 7HP B&S Intek - Euro (ELP21702BV) Model 128602, Type 0112, Trim
tionItem Qt
Note
B1
B1
Type 0117, Trim E1
E1
Footnotes:
*NOTE: Purchase engine components directly from engine manufacturer dealer.
Manual No. 700620221" CAST DECK WALK BEHIND MOWER
SERIES 2
13
TP 400-5076-5-WB-N
WHEELS, FRONT & REAR
Manual No. 7006202 21" CAST DECK WALK BEHIND MOWER
TP 400-5076-5-WB-N
14
SERIES 2
WHEELS, FRONT & REAR
p
y
Part No Descri
1 7024540 2 HUB-CAP, Rear Wheel
2 7091193 4 HAIRPIN, 1/16 x 29/32” Cotter
3 7091192 4 WASHER, 1/2” Flat
4 7073618 2 BUSHING, Rear Wheel
5 7074629 2 ASSEMBLY, Rear Drive Wheel - 9.0 x 2.0 includes item 4
6 7029492 1 BELT, Traction (3L Sect, 33.200” effective length)
7 7013946 2 RETAINER, Wheel
8 7091232 1 PIN, 3/8 x 5/8” Tie Bar
9 7090365 1 PIN, 1/8 x 3/4” Cotter
10 7024751 1 SPRING, Tie Bar
11 7041364 1 WELDMENT, Tie Bar
12 7016152 2 HUB-CAP, Front Wheel
13 7028456 2 ASSEMBLY, Wheel Front
14 7024558 2 BUSHING, Front Axle
15 7041344 1 WELDMENT, Front Axle
16 7034340 1 SPRING, Axle Retaining Left Hand
17 7034341 1 SPRING, Axle Retaining Right Hand
tionItem Qt
Note
Footnotes:
Manual No. 700620221" CAST DECK WALK BEHIND MOWER
SERIES 2
15
TP 400-5076-5-WB-N
AXLE/TRANSMISSION ASSEMBLY
Manual No. 7006202 21" CAST DECK WALK BEHIND MOWER
TP 400-5076-5-WB-N
16
SERIES 2
AXLE/TRANSMISSION ASSEMBLY
p
y
Part No Descri
1 7058975 1 ASSY, Axle/Transmission, 3SP (Incl. ietms 2-20)
2 7028813 1 ASSEMBLY, Transmission, 3-Speed Commercial
3 7074207 1 WELDMENT, Rear Axle
4 7024573 2 SHIELD, Dust
5 7024749 2 PIN, Pawl, 3/16” Outside Dia.
6 7024549 1 PINION, Right Hand Drive
7 7024550 1 PINION, Left Hand Drive
8 7014341 4 RING, External Retaining
9 7026420 1 GRIP, Flat Bar (Black)
10 7026478 2 RETAINER, Pinion Seal
11 7026479 2 SEAL, Pinion (Felt)
12 7025066 2 ASSEMBLY, Bearing Carrier (Includes 7024724, Ball Bearing,
13 7024715 2 BUSHING, Rear Axle (Self-Prop)
14 7024748 1 TUBING, 5/8” I.D. Convoluted
15 7090361 2 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
16 7035325 1 BRACKET, Transmission
17 7091187 1 NUT, M10-1.50 Hex Nyloc
18 7029494 1 PULLEY, Transmission
19 7024879 1 WASHER, Felt
20 7091084 4 SCREW, 1/4-20 x 3/8” Hex Washer Head Self-Tap
21 7091194 2 WASHER, 17/32 I.D. x 1-1/2” O.D. Flat
22 7046522 1 SPRING, Clutch
23 7035540 1 LEVER, Transmission (Metal)
24 7091075 5 SCREW, #10-24 x 5/8” Hex Washer Self-Tap
25 7091267 1 NUT, #10-24 Hex Center Lock
26 7091941 1 SCREW, #10-24 x 3/4” Pan Head Machine
27 7091552 1 WASHER, .219 I.D. Flat
28 7061272 1 KIT, Height Adjusting Lever (Includes items 29-31)
29 7033967 1 LEVER, Height Adjusting (Black)
30 7091289 2 SCREW, #10-32 x 5/8” Hex Washer Self-Tap, GR 5
31 7090376 2 NUT, #10-32 Hex Nyloc
tionItem Qt
Note
1/2” I.D. x 1-1/8” O.D.)
Footnotes:
Manual No. 700620221" CAST DECK WALK BEHIND MOWER
SERIES 2
17
TP 400-5076-5-WB-N
DISCHARGE COMPONENTS
Manual No. 7006202 21" CAST DECK WALK BEHIND MOWER
TP 400-5076-5-WB-N
18
SERIES 2
DISCHARGE COMPONENTS
p
y
Part No Descri
1 7028445 1 GRASS BAG, Snapper Platinum Series
2 7053176 1 ASSEMBLY, Catcher Frame (Incl. item 3)
3 7026421 1 GRIP, Rectangular (Black)
4 7026390 1 PLUG, Mulching (21M)
5 7026714 1 CHUTE, Side Discharge (Incl. 7013010 Decal)
tionItem Qt
Note
Footnotes:
Manual No. 700620221" CAST DECK WALK BEHIND MOWER
SERIES 2
19
TP 400-5076-5-WB-N
DECALS
Manual No. 7006202 21" CAST DECK WALK BEHIND MOWER
TP 400-5076-5-WB-N
20
SERIES 2
DECALS
p
y
Part No Descri
1 7074135 1 DECAL, Sound 100 dB (Euro)
2 7029779 1 DECAL, Spark Plug International Symbol
3 7046714 1 DECAL, “SNAPPER” (5HP & 6HP)
3 7074386 1 DECAL, “SNAPPER” Black/Gold (6-3/4HP)
3 7075618 1 DECAL, “SNAPPER” (ELP21702BV)
4 7072921 1 DECAL, Warning (Deck)
5 7028439 1 DECAL, Convertible Mower
6 7029431 1 DECAL, (OPC) Operator Presence Control
7 7029432 1 DECAL, Ground Drive, (Cast Al Comm)
8 7046924 1 DECAL, Chute Deflector Warning
9 7046357 1 DECAL, Warning 1997
10 7029784 2 DECAL,Deck/Chute International Warning
11 7029776 1 DECAL, Euro Community (CE)
12 7028454 1 DECAL, Height Adjustment (Euro)
13 7029781 1 DECAL, Air Filter International Symbol
14 7072820 1 DECAL, 2000 Year of Mfg. (not shown)
14 7073433 1 DECAL, 2001 Year of Mfg. (not shown)
14 7074548 1 DECAL, 2002 Year of Mfg. (not shown)
14 7075378 1 DECAL, 2003 Year of Mfg.
15 7013010 1 DECAL, Danger, Cut Finger
16 7022841 1 DECAL, Warning (Deck) (Euro)
17 7073335 1 DECAL OPEI Ride-On
18 7073462 1 DECAL, Caution Symbols
tionItem Qt
Note
Footnotes:
Manual No. 700620221" CAST DECK WALK BEHIND MOWER
SERIES 2
21
TP 400-5076-5-WB-N
ELECTRIC START COMPONENTS
Manual No. 7006202 21" CAST DECK WALK BEHIND MOWER
TP 400-5076-5-WB-N
22
SERIES 2
ELECTRIC START COMPONENTS
p
y
Part No Descri
1 7011138 1 KEY (Set of Two)
2 7023506 1 BEZEL
3 7012685 1 NUT, 5/8-32 Hex Lock
4 7016132 1 SPACER
5 7071972 1 BRACKET, Ignition Switch
6 7091024 2 NUT, 1/4-28 Hex
7 7091023 2 WASHER, 1/4” Internal Tooth Lock
8 7091025 2 SCREW, 1/4-28 x 1-3/8” Hex Head Cap, GR 5
9 7029080 1 COVER, Switch
10 7028765 1 SWITCH, Ignition
11 7029081 1 HARNESS, wiring
tionItem Qt
Note
Footnotes:
Manual No. 700620221" CAST DECK WALK BEHIND MOWER
SERIES 2
23
TP 400-5076-5-WB-N
BATTERY & COMPONENTS
Manual No. 7006202 21" CAST DECK WALK BEHIND MOWER
TP 400-5076-5-WB-N
24
SERIES 2
BATTERY & COMPONENTS
p
y
Part No Descri
-- 7067012 KIT, Battery (Includes Items 1 thru 4)
1 7019763 1 BATTERY, 12 Volt, 35 CCA
2 7015488 1 HARNESS, Battery
3 7043977 2 SCREW, M5 x 10mm Cross Recess Pan Head
4 7090932 2 NUT, Battery Terminal
5 7073628 1 BRACKET, Battery Support
6 7090052 2 WASHER, 1/4” Split Lock
7 7090073 2 SCREW, 1/4-20 x 3/4” Hex Head Cap, GR 5
8 7018977 1 CHARGER, Battery, 230v/12v
tionItem Qt
Note
Footnotes:
Manual No. 700620221" CAST DECK WALK BEHIND MOWER
SERIES 2
25
TP 400-5076-5-WB-N
WIRING SCHEMATIC
Manual No. 7006202 21" CAST DECK WALK BEHIND MOWER
TP 400-5076-5-WB-N
26
SERIES 2
WIRING SCHEMATIC
p
y
Part No Descri
-- -- 1 Wiring Schematic includes harness # 7029081
tionItem Qt
Note
Footnotes:
Manual No. 700620221" CAST DECK WALK BEHIND MOWER
SERIES 2
27
TP 400-5076-5-WB-N
Parts Manual fo
r
21" CAST DECK WALK BEHIND MOWER
EUROPEAN
SERIES 2
RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS
COPYRIGHT ©2005
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS
WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE
AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE
SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.
McDonough, GA, 30253 U.S.A.
Revision 5,
7/28/2005
Manual No. 700620 2
TP 400-5076-5-WB-N
Loading...