Parts Manual for
EUROPEAN REAR ENGINE RIDER
SERIES 16 & 18
MODELS:
E250816BE
E281016BE
E281216BE
E281318BE
E331316BVE
E331416KVE
E331518KVE
CONTENTS
DESCRIPTION PAGE(S) DESCRIPTION PAGE(S)
WHEELS, TIRES.................................................................... 2, 3 BELTS, BRAKES, INTERLOCK (28”/33”, Ser. 16).................25
FRONT END, STEERING....................................................... 4, 5 BELTS, BRAKES, INTERLOCK (28”/33”, Ser. 18)...........26, 27
MAIN CASE (Solid Seat Mount) ........................................... 6, 7 DRIVE DISC ASSEMBLY.........................................................28
MAIN CASE (Hinged Seat Mount)........................................ 8, 9 FUEL TANK & OPERATORS SEAT ........................................29
DIFFERENTIAL, R.H. FENDER ......................................... 10, 11 ENGINE & EXHAUST MUFFLER.............................................30
CHAIN CASE ASSEMBLY, L.H. FENDER ........................ 12, 13 THROTTLE CONTROLS..........................................................31
SMOOTH CLUTCH ASSEMBLY........................................ 14, 15 ELECTRICAL SYSTEMS (Briggs).....................................32, 33
CUTTING DECKS, DEFLECTORS .................................... 16, 17 ELECTRICAL SYSTEMS (Kohler).....................................34, 35
RAILS, LIFT ARMS, CAM LIFT (Series 16)...................... 18, 19 WIRING SCHEMATICS .....................................................36, 37
RAILS, LIFT ARMS, CAM LIFT (Series 18)...................... 20, 21 DECALS ..............................................................................38-41
BLADE STOP PEDALS ........................................................... 22 ACCESSORIES & ATTACHMENTS.........................................42
SPINDLE ASSEMBLY.............................................................. 23 HARDWARE BAGS ..................................................................43
BELTS, BRAKES, INTERLOCK (25”, Series 16) ................... 24
COPYRIGHT © 1999
SNAPPER INC.
ALL RIGHTS RESERVED
(Rev 3, 9/22/99) MANUAL No. 06103
WHEELS - FRONT
6
1 ASSEMBLY
10
5
2
9
7
4
3
4
7
12
11
ITEM PART NO. DESCRIPTION
1 5-2268 ASSEMBLY, Front Tire & Rim (Complete)
(Includes Items 2, 3, 4, 6, 12)
-- 5-2267 ASSEMBLY, Front Tire & Rim (Includes Items 2 Thru 6)
2 2-3828 TIRE, 4.10/3.50 x 4
3 1-7146 RIM (For 4.10/3.50 x 4 Tire)
4 1-1807 BEARING, Ball
5 1-2234 VALVE, Air (Snap-in)
6 1-4669 FITTING Lube
7 1-0935 WASHER
8 1-1022 CAP, Hub
9 1-1032 SEAL, Felt
10 3-1038 CAP, Dust
11 9-1516 PIN, 5/32 x 1" Cotter
12 1-0821 TUBE, Inner (For 4.10/3.50 x 4 Tire)
8
MANUAL No. 06103 R. E. RIDER (EURO) SERIES 16 & 18
2
WHEELS - REAR
2A, 2B, 2C
3A, 3B, 3C
12
5
9
14
13
10
17, 17A
18
11
12
6
15
16
ITEM PART NO. DESCRIPTION
1 5-2269 ASSEMBLY, Rear Tire & Rim (Includes Items 2A, 3A, & 4) (25" Models)
-- 5-2270 ASSEMBLY, Rear Tire & Rim (Includes Items 2B, 3B, & 4) (28" Models)
-- 5-2671 ASSEMBLY, Rear Tire & Rim (Includes Items 2C, 3C, & 4) (33" Models)
2A 2-3889* TIRE, Standard, 16-4.80 x 8 (25" Models)
2B 1-5968 TIRE, Wide, 16-6.50 x 8 (28" Models)
2C 2-2584 TIRE, Extra Wide, 16-7.50 x 8 (33" Models)
3A 1-2162 RIM, Standard, (For 16-4.80 x 8 Tire) (25" Models)
3B 1-2163 RIM, Wide, (For 16-6.50 x 8 Tire) (28" Models)
3C 1-7147 RIM, Extra Wide, (For 16/7.50 x 8 Tire) (33" Models)
4 1-2234 VALVE, Air (Snap-in)
5 1-2332 CLAMP, Right Hand (8, 10, 12, 13 & 15HP)
-- 1-4542 CLAMP, Right Hand (13 & 14 HP)
6 9-1502 BOLT, 1/2-20 x 3/4" Lug, Grade 5 (6)
7 3-1732 BOOT, Right Hand (8, 10, 12 & 13HP)
-- 1-4541 BOOT, Right Hand (13, 14 & 15 HP)
8 1-1817 SEAL, Oil
9 4-0433 HUB, Rear Wheel (Right Hand)
10 2-3895 CAP, Hub
11 4-0434 HUB, Rear Wheel
12 1-1201 NUT, 5/16-24 Hex Center Lock
13 1-1035 BOLT, 5/16-24 x 1-5/8" Tapered (Left Hand)
14 1-1013 BOLT, 5/16-24 x 2" Tapered (Right Hand)
15 1-4662 SEAL, Oil (Left Hand)
16 1-2332 CLAMP, (Left Hand) (13 & 14 HP)
17 1-4658 BOOT, Ball Bearing Models (Left Hand) (13 14 & 15HP Engines)
17A 3-5918 BOOT, Standard Models (Left Hand) (8, 10, 12 & 13HP Engines)
18 2-3522 CAP, Hub (Left Hand)
1 ASSEMBLY
*NOTE: 2-3889 accepts part
4
# 1-0525 TUBE, 16-4.80
(optional)
R. E. RIDER (EURO) SERIES 16 & 18 MANUAL No. 06103
3
FRONT END STEERING
7
5
6
2
1
40
43
14
20
19
18
(25” & 28”
MODELS)
8
4
3
12
45
13
14
42
10
44*
41
20
16
18
(33” MODELS)
17
15
14
OR
37*
33*
47*
9
39
31
38*
51
50
49
11
26
20
14
29
22
23
23
14
27
19
30
14
20
46
22
23
20
32
16
23
29
23
22
*NOTE: These parts are used on the 25” Model Only.
MANUAL No. 06103 R. E. RIDER (EURO) SERIES 16 & 18
4
FRONT END STEERING
ITEM PART NO. DESCRIPTION
1 5-1941 ASSEMBLY, Steering
Wheel (Includes Item 2)
2 2-3781 LOGO, SNAPPER
3 1-3862* PIN, 1/4 x 1-1/2" Roll
4 3-3882 LEVER, Clutch/Brake
5 2-3666 SPRING
6 2-3655 GRIP, Lever
7 9-1017 SCREW, #8-32 x 3/8"
Cross Recess
8 9-1018 NUT, #8-32 Hex
9 4-1476 ARM, Clutch/Brake
10 2-2372 SPACER, Main Tube
11 1-6704 FASTENER, Panel
12 2-3667* COVER, Steering Shaft
(Foam)
13 2-3671* COVER
14 1-0935 WASHER, 3/4 Flat
15 1-9166 BUSHING, 3/4" Steering
Shaft
16 9-1515* COTTER-PIN, 3/16 x
1-1/2” (2)
17 4-1654 WELDMENT, Front Frame
(25" & 28" Models)
-- 4-1653 WELDMENT, Front Frame
(33" Models)
18 2-3660 PAD, Foot (Right Side)
(25" & 28" Models Shown)
-- 2-3663 PAD, Foot (Right Side)
(33" Model Shown)
-- 2-3659 PAD, Foot (Left Side) (25”
& 28" Models - Not Shown)
-- 2-3662 PAD, Foot (Left Side) (33”
Model - Not Shown)
19 1-0746 RING, 5/8” Ext. Retaining (2)
20 1-0986 BEARING, Nylon (5)
21 4-1688 PIN, Narrow King (Right
Side)
22 9-1297* NUT, 5/16-24 Hex (4)
ITEM PART NO. DESCRIPTION
23 9-1315* WASHER, 5/16 Split Lock (4)
24 1-3321 BUSHING, Nylon (4)
25 4-1687 PIN, Narrow King (Left Side)
26 4-1686 PIN, Wide King (Right Side)
27 4-1685 PIN, Wide King (Left Side)
28 9-1516 COTTER-PIN, 5/32 x 1" (2)
29 2-4935 TIE-ROD (33” Models) (2)
30 2-4735 PEDAL, Clutch/Brake
31 1-0739 RING, 5/8” External Retaining
32 1-2661 PAD, Clutch/Brake Pedal
33 2-8395 SPACER, Pivot
34 4-1381 SHAFT, Steering (Narrow
Front End)
35 2-4915 TIE-ROD, Left Side
(25" & 28" Models)
36 2-4916 TIE-ROD, Right Side
(25" & 28" Models)
37 2-8332 STUD, 3/8-24 x 5/8"
Shoulder
38 2-2881 SPACER (2)
39 9-1151 SCREW, 5/16-18 x 1-1/4"
Hex Washer Self-Tapping
40 2-2344 CABLE, Brake (Series 16) (shown)
-- 7-1909 CABLE, Brake (Ser. 18)
41 2-9913 CABLE, Clutch
42 3-4174 UNION, Cable
43 9-1495 BOLT, 1/4-20 x 3/4" Hex
Flange Lock
44 9-0854 NUT, 3/8-24 Hex Nyloc
45 9-0372* NUT, 1/4-20 Hex Center Lock
46 4-1553 SHAFT, Steering (Wide
Front End)
47 1-2867 HAIRPIN, 1/8 x 2-9/16”
48 9-1514 WASHER, 3/8 Flat
49 9-1198 SCREW, 3/8-16 x 5/8”
Self-Tapping
50 9-0517 WASHER, 3/8 Flat
51 2-8774 SPACER, .39 x .625 x .19
*NOTE: These items are in 6-1792 Hardware Bag (see page 43 for complete list of hardware bag components).
R. E. RIDER (EURO) SERIES 16 & 18 MANUAL No. 06103
5
MAIN CASE (Solid Seat Mount)
43
9
4
6
2
39
5
38
36
33
38
39
37
37
35
10
31
1
22
21
7
32
20
38
11
39
34
12
41
39
38
35
37
40
36
43
34
5
3
7
9
13
29
29
28
15
19
39
38
23
30
42
29
27
17
18
25
24
26
MANUAL No. 06103 R. E. RIDER (EURO) SERIES 16 & 18
29
16
14
8
27
6
MAIN CASE (Solid Seat Mount)
ITEM PART NO. DESCRIPTION
1 4-2701 CASE, Main (Standard) (8 & 10HP)
2 3-6367 BUMPER, Rear
3 -- FENDER, Left Hand (See page 12 for related parts)
4 2-8990 COVER, Battery
5 2-8200 SWIVEL (2)
6 2-8989 COVER, Switch
7 3-4299 WING, Rear (2) (Models 28” & 33” Only!)
8 9-0585 NUT, 5/16-18 Hex Flange Lock (2)
9 9-0793 SCREW, 5/16-18 x 3/4” Self-Tapping (4)
10 2-3676 LINK, Shift (Long)
11 4-1384 ARM, Shift
12 3-3799 BRACE, Cross
13 1-1018 LINK, Shift (Short)
14 9-0196 NUT, 5/16-18 Hex (2)
15 4-0598 ARM, Shift Handle
16 1-0754 SPRING, Shift Handle
17 4-1232 DETENT, Shift
18 4-0599 HANDLE, Shif t
19 1-0969 NUT, Hex Large Flange Lock 5/16-24
20 2-3656 KNOB, Shift Handle
21 2-7429 CABLE, Deck Support (5.5”) (25” Models Only!)
22 2-2509 BUSHING, Pilot
23 9-0391 WASHER, 5/16 Internal Tooth Lock
24 9-0037 COTTER-PIN, 3/32 x 3/4"
25 2-3914 PIN, 1/4 x 1-3/4" Tapered Clevis
26 1-9245 BUSHING, Nylon
27 3-1036 WASHER, Thrust (2)
28 1-9246 BUSHING, Nylon (2)
29 9-0361 SCREW, 5/16-18 x 5/8" Self-Tapping (14)
30 1-2652 CLIP, Wire
31 3-4724 BRACKET, Switch
32 9-0981 SCREW, Self Tapping, 10-32 x 1/4”
33 9-1272 FASTENER, 1/4x3/4 Ratchet (6)
34 9-1506 SCREW, 5/16-18 x 1-1/2" Self-Tapping (4)
35 9-1513 SCREW, 5/16-24 x 1-3/4" Hex Head Cap (4)
36 1-1791 RETAINER, 5/16 Bolt (4)
37 9-1296 WASHER, 5/16" Flat (4)
38 9-1315 WASHER, 5/16" Spl it Lock (8)
39 9-1297 NUT, 5/16-24 Hex (8)
40 2-2486 DRAIN, Oil (Short)
41 1-7653 GUIDE, Belt (25" Models )
-- 3-5971 GUIDE, Belt (28” Models)
42 9-0206 SCREW, 5/16-18 x 3/4” Hex Cap (2)
43 9-1503 HAIRPIN, 3/32 x 1-1/2” (2)
R. E. RIDER (EURO) SERIES 16 & 18 MANUAL No. 06103
7
MAIN CASE (Hinged Seat Mount)
39
53
9
38
43
6
4
38
18
19
44
45
22
47
46
20
49
17
7
36
42
35
12
39
36
39
38
34
21
41A
11
52
48
38
39
50
38
37
1
37
33
10
40
39
38
32
2
37
53
36
35
51
31
34
41B
44
3
9 7
39
29
13
38
5
29
23
6
54
30
25
27
24
26
MANUAL No. 06103 R. E. RIDER (EURO) SERIES 16 & 18
29
8
14
28
27
16
8
MAIN CASE (Hinged Seat Mount)
ITEM PART NO. DESCRIPTION
1 4-2700 CASE, Main (13 HP Briggs)
-- 4-2702 CASE, Main (14 HP Kohler)
2 3-6367 BUMPER, Rear
3 3-7285 FENDER, Left Hand (See page
12 for related parts) (Briggs)
-- 3-7958 FENDER, Left Hand
(Kohler Engine)
4 2-8990 COVER, Battery
5 1-0969 NUT, 5/16-24 Hex Flange Lock
6 2-8989 COVER, Switch
7 3-4299 WING, Rear (Models 28” & 33”
Only!) (2)
8 9-0585 NUT, 5/16-18 Hex Fl. Lock (2)
9 9-0793 SCREW, 5/16-18 x 3/4” Hex
Washer Self-Tap (4)
10 2-3676 LINK, Shift (Long)
11 4-1384 ARM, Shift
12 3-3799 BRACE, Cross
ITEM PART NO. DESCRIPTION
30 1-2652 CLIP, Wire (7/16”)
31 2-7972 DRAIN, Oil (1/4 Turn) (Kohler)
32 7-7692 BOLT, M8-1.25 x 25mm, Self-
Tap (Kohler)
33 9-1272 FASTENER, 1/4 x 3/4 Ratchet
(6)
34 9-1506 SCREW, 5/16-18 x 1-1/2" Hex
Washer Self-Tap (4)
35 9-1513 SCREW, 5/16-24 x 1-3/4" Hex
Head Cap, Grade 5 (4)
36 1-1791 RETAINER, 5/16 Bolt (4)
37 9-1296 WASHER, 5/16" Flat (4)
38 9-1315 WASHER, 5/16" Split Lock (8)
39 9-1297 NUT, 5/16-24 Hex (8)
40 9-1080 SCREW, #10-24 x 1/4”Hex
Washer Self Tap (2)
41A 3-6419 GUIDE, Belt (33” Kohler)
41B 3-5971 GUIDE, Belt (28” Briggs)
13 1-1018 LINK, Shift (Short)
14 9-0196 NUT, 5/16-18 Hex (2)
15 4-0598 ARM, Shift Handle
16 1-0754 SPRING, Shift Handle
17 4-1232 DETENT, Shift
18 4-0599 HANDLE, Shift
19 2-3354 SWITCH, Seat
20 2-3656 KNOB, Shift Handle
21 3-4724 BRACKET, Switch
22 2-2509 BUSHING, Pilot
23 9-0391 WASHER, 5/16 Internal Tooth
Lock
24 9-0037 PIN, 3/32 x 3/4" Cotter
25 2-3914 PIN, 1/4 x 1-3/4" Tapered
Clevis
26 1-9245 BUSHING, Nylon
27 3-1036 WASHER, Thrust (2)
28 1-9246 BUSHING, Nylon (2)
29 9-0361 SCREW, 5/16-18 x 5/8" Hex
Washer Self-Tap (13)
42 9-0238 SCREW, 5/16-24 x 1” Hex
Head Cap, Grade 5 (4)
*43 3-4093 PLATE, Engine
44 2-8200 SWIVEL (2)
45 3-4664 PLATE, Seat
46 2-8656 PIN, Hinge
47 9-0360 PIN, 1/16 x 3/4”, Cotter
48 2-8540 CUSHION
49 2-8657 SPRING, Seat O.P.C.
50 9-0999 SCREW, 1/4-20 x 5/8” Self-
Tap, Truss Head, Torx
51 2-2486 DRAIN, Oil (Briggs)
52 9-1294 WASHER, 9/32” I.D. x 5/8”
O.D.
53 9-1503 HAIRPIN, 3/32 x 1-1/2” (2)
54 9-0206 SCREW, 5/16-18 x 3/4” Hex
Head Cap, Grade 5 (2)
* NOTE: ITEM 43 IS USED ON 14 HP KOHLER
ENGINES ONLY!
R. E. RIDER (EURO) SERIES 16 & 18 MANUAL No. 06103
9
DIFFERENTIAL, R. H. FENDER
32
23
22
25
24
21
1
2
2
26
5
4
6
7
34
7
6
9
10
8
27
11
13
33
20
35
19
18
28
16
12
17
29
14
28
27
15
30
31
16
MANUAL No. 06103 R. E. RIDER (EURO) SERIES 16 & 18
10
DIFFERENTIAL, R. H. FENDER
ITEM PART NO. DESCRIPTION
1 1-4401 COLLAR, Lock (Includes P.N. 9-0201 Set screw)
2 1-8822 BALL BEARING, Axle (R. H. Fender) (33” Models - 13 & 14 HP)
2A 1-2296 BEARING, Axle (R. H. Fender) (25” & 28” Models – 8, 10 & 13HP)
3 1-0969 NUT, 5/16-24 Hex Flange Lock
4 3-1079 WASHER, Thrust
5 3-8067 PLATE, Differential
6 2-2115 SPACER, Pinion (4)
7 2-1127 GEARS, Differential Pinion
8 1-1072 WASHER, Thrust
9 5-1584 ASSEMBLY, Drive Hex Tube
10 1-0988 WASHER, Hex Nylon Splash
11 1-0964 GEAR, 11 Teeth-10 Pitc h
12 1-0941 CHAIN, 46 Pitch (#35)
13 2-1129 SPROCKET
14 1-0965 RING, Retaining
15 2-1128 SPACER
16 1-2332 CLAMP, Boot (2)
17 1-7083 BOOT, Oil Seal
18 1-1024 PLUG, Oil Fill & Check
19 3-7279 CASE, Transmission
20 2-8762 GASKET, Transmission Case
21 3-7957 FENDER, Right Hand ( 33” Ball Bearing Differential Models)
(2.498” hole)
-- 3-7280 FENDER, Right Hand (25” & 28” Bushing Differential Models)
(1.62” hole)
22 2-1158 GEAR, 63 Teeth-10 Pitc h
23 4-7763 AXLE, Long (Includes Gear) (Use Only With Short Axle P.N. 5-7398)
24 1-1026 SPACER
25 5-7398 AXLE, Short (Includes Gear) (Use Only With Long Axle P.N. 4-7763)
26 1-2333 SCREW, 5/16-24 x 1-5/8" Hex Cap Special Lock (4)
27 1-1156 O-RING, 5/16 (2)
28 1-1782 WASHER, Belleville (2)
29 9-0395 WASHER, 5/16 External Tooth Lock
30 9-0188 WASHER, 5/16 Flat
31 1-1042 BOLT, 5/16-24 x 2-5/8" Idler
32 9-0361 SCREW, 5/16-18 x 5/8" Self-Tapping (11)
33 9-0362 SCREW, 1/4-20 x 5/8" Self-Tapping (13)
34 3-2107 SPACER, Shor t Axle
35 6-1017 GREASE, Transmission
-- 6-0411 KIT, Differential (Includes items 2A & 3-7280 Fender)
-- 6-0662 KIT, Differential (Includes items 2 & 3-7957 Fender)
R. E. RIDER (EURO) SERIES 16 & 18 MANUAL No. 06103
11
CHAIN CASE, L. H. FENDER
13
14
15
2
1 ASSEMBLY
5
28
16
7
6
5
8
9
10
31
4
28
12
10
3
11
9
23
25
24
30
22
29
21
20
26
22
19
17
32
33
MANUAL No. 06103 R. E. RIDER (EURO) SERIES 16 & 18
12
27
18
CHAIN CASE, L. H. FENDER
ITEM PART NO. DESCRIPTION
1 5-2683 ASSEMBLY, Chain Case
(Includes Items 2 Thru 13,15,16, & 31 Thru 33)
2 4-1136 CASE, Spr oc ket
3 2-8761 GASKET, Case Cover
4 1-1121 WASHER, Belleville (2)
5 1-0756 BEARING, Ball (2)
6 1-8963 SPROCKET & SHAFT
7 1-0614 KEY, 1/8 x 5/8" Woodruff
8 3-9778 COVER, Chain Case
9 1-0942 BEARING, Needle (2)
10 1-1086 WASHER, Nylon Thrust (2)
11 4-0355 HUB & SPROCKET
12 1-0941 CHAIN
13 9-0307 SCREW, #10-24 x 5/8" Hex Washer Self-Tap (10)
14 1-1024 PLUG, Oil Fill & Check
15 2-2785 ROLLER
16 1-0776 RING, 1/2” External Retaining (Heavy Duty)
17 3-7285 FENDER, Left Hand (25” & 28” Models) (1.628” I. D. hole)
-- 3-7958 FENDER, Left Hand (33” Models ) (1.744” I. D. hole)
18 1-4625 COLLAR, Lock (Includes P.N. 9-0776 Set Screw, 1/4-20 x 1/4")
(Used with ball bearing, item 32, only)
19 5-0918 BEARING, Left Hand Fender (Includes Item 20)
(25” & 28” Models, 8 & 10 HP)
20 1-3324 FITTING, Lube
21 1-1070 ROD, Cross-Tie
22 1-2332 CLAMP, Boot (2)
23 1-7084 BOOT, Oil Seal
24 1-1071 WASHER, Thrust Nylon
25 1-1072 WASHER, Thrust
26 9-1505 NUT, 5/8-18 Hex Nyloc
27 1-0969 NUT, 5/16-24 Hex Flange Lock
28 1-9260 O-RING (2)
29 2-3447 SPACER
30 1-2271 WASHER, Shim (As Required)
31 2-7981 WASHER, Shim (6)
32 1-4624 BALL BEARING, Left Hand Fender (33” Models)
-- 5-1451 ASSEMBLY, Left Hand Fender (Includes Fender P.N. 3-7958 &
Bearing P.N. 1-4624) (33” Models, 13 & 14 HP)
33 6-1017 GREASE, Transmission (Use 2 oz. maximum)
NOTE: See Pages 14 & 15 For Illustration Of Brake Lever Assembly & Related Parts.
R. E. RIDER (EURO) SERIES 16 & 18 MANUAL No. 06103
13
SMOOTH CLUTCH ASSEMBLY
19
14
23
22
CLUTCH CABLE
ATTACH MENT HOLE
17
15
16
21
18
20
16
21
17
13
9
7
11
10
2
3
4
12
8
1 ASSEMBLY
5
6
MANUAL No. 06103 R. E. RIDER (EURO) SERIES 16 & 18
14
SILHOUETTE OF
BRAKE CABLE
See Page 4