Snapper SLT23460FC (7800318), SLT23460FC (7800316), LT24520 (7800317), 7800345, 7800344 Owner’s Manual

...

SafetyInstructions& Operator'sManual for

LAWNTRACTOR

SERIES0

Models

LT195420(7800206)

CLT195420 (7800313)

LT23460(7800207)

CLT23460(7800315)

LT24520 (7800212)

CLT24520(7800317) SLT23460 (7800342)

SLT24520 (7800343) CSLT23460(7800344) CSLT24520(7800345)

SLT23460FC (7800316) SLT24520FC (7800318)

NOTE:Specifications are correct at time of printing and are subjectto changewithout notice. * Actual sustainedengine powerwill likely be lower due to operating limitations and environmentalfactors. Please refer to 'EnginePower Rating Information' for

further details.

SNAPPERMcoooooo.o_.,_o_o_,

Manual No.7102556 (Rev. '-', 4/17/2008)

TP lO0-5396---TC-N

Thankyoufor purchasing this quality-built Snapper product. We are pleasedthat you've placedyour confidencein the Snapper

brand. When operatedand maintained according to the instructions inthis manual,your Snapper mower will provide many years of dependableservice.

Thismanual containssafety information to makeyou awareof the hazardsand risks associatedwith mowers and howto avoid them. BecauseSnapperdoes not necessarily know all the applications this mowercould be usedfor, it is important that

you readand understand these instructions. Keepthis manualnear the mower for convenient reference.

Thismowerrequires final assemblybefore use. Referto the Assembly section of this manualfor instructions on final assembly procedures. Follow the instructions completely.

Where to Find Us

You never have to look far to find Briggs & Stratton support and servicefor your mower. Consultyour Yellow Pages.There are over 30,000 Briggs & Stratton authorized service dealersworldwide who provide qualityservice.You canalso contact Snapper Customer Service at 1-800-317-7833, or on the Internet at www.snapper.com.

Mower

Model Number

Serial Number

Engine

Model

Type Trim

DatePurchased

IIIIIIIII

It is veryimportant that you registeryour purchasewith Snapperto ensurewarranty coverage.Please mailyour product registration card to:

Snapper at P.O.Box 1379, McDonough,Georgia 30253.

SNAPPERis a trademarkof Briggs& StrattonPower ProductsGroup,LLC

Jefferson,WI, USA.

Briggs& StrattonYard Power ProductsGroup

Milwaukee, WI, USA. All RightsReserved.

Tableof Contents

Operator Safety .................................. 2

Important OperatorSafety Instructions ............................. 2

International Pictorials.......................................... 5

D_ €1D

Assembly ...................................... 6

Parts Bag- Contents ........................................... 6

Installing the Seat ............................................. 7

Assembling the SteeringWheel................................... 7

MaintenanceFree Battery........................................ 8

IMPORTANT!BeforeYou Start Mowing ............................ 9

FeaturesandControls.............................. 11

Operation ...................................... 12

Attachments.................................................. 12

Using Controls................................................ 12

Driving and Stopping the Unit .................................... 13

Mowing ..................................................... 16

Engine Operation.............................................. 18

Tips ........................................................ 19

Maintenance.................................... 20

MaintenanceSchedule.......................................... 20

GeneralRecommendations ...................................... 21

Inspection ................................................... 21

Adjustments.................................................. 22

MaintenanceFree Battery........................................ 26

Lubrication................................................... 27

Mower DeckMaintenance ....................................... 28

Misc........................................................ 38

Storage ..................................................... 39

¢'D

'ID

.,q

Troubleshooting.................................. 40

Specifications ................................... 42

SlopeGuide .................................... 43

Warranties ..................................... 45

GeneralWarranty.............................................. 45

WARNING

Batteryposts, terminals and relatedaccessoriescontain

lead and lead compounds, chemicals known to the State of Californiato cause cancer and birth defects or other

reproductiveharm. Wash hands after handling.

English

WARNING

Engineexhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to causecancer or other reproductive

harm.

0 0

--t

ImportantOperatorSafetyInstructions

r.fJ

Protection for Children

Tragic accidents canoccur if the operator is not alertto the

presenceof children. Children are often attracted to the machine andthe mowing activity. Children who have been given rides in the past may suddenly appear in the mowing areafor another ride and be run over or backedover by the machine.Never assume that children will remain whereyou

last saw them.

1. KEEPchildren out of the mowing area and under the

watchful careof a responsible adult other than the operator.

2. DO NOTallow children in yard when machine is operated (evenwith the bladeOFF).

3. DO NOTallow children or others to ride on machine, attachmentsor towed equipment (evenwith the blades

OFF).Theymay fall and be seriously injured.

4. DO NOTallow pre-teenagechildren to operate machine.

5.ALLOW only responsible adults & teenagerswith mature

judgment under close adult supervision to operate machine.

6. DO NOToperateblades in reverse.STOP BLADES.LOOK and SEEbehind and down for children, pets and hazards beforeand while backing.

7. USEEXTRACAREwhen approaching blind corners, shrubs, trees, or other objects that may obscure vision.

WARNING:This powerful cutting machine is capableof amputating hands and feet and can throw objects that cancause injury and damage! Failureto comply with the following SAFETYinstructions could result in serious injury or death to the operator or other persons. Theowner of the machine must understandthese instructions and must allow only persons who understand these instructions to operatemachine. Each person operating the machine must be of sound mind and body and must not be underthe influence of any substance,which might impair vision, dexterity or judgment. If you have any questions pertainingto your machine which your dealercannot answerto your satisfaction, call or write the CustomerService Department at SNAPPER,McDonough, Georgia30253. Phone: (1-800-317-7833).

Protection against Tipovers

(ContinuedFromPreviousColumn)

6. KEEPA SAFEDISTANCE(at least 3 feet) away from edge of ditches and other drop offs. The machine could turn over

if an edge caves in.

7. Always begin forward motion slowly and with caution.

8. Useweights or a weighted load carrier in accordance with instructions supplied with a grass catcher. DONOT operate machine on slopes exceeding10 degrees (18% grade) when equippedwith grasscatcher.

9. DO NOTput your foot on the ground to try to stabilize the machine.

10. DO NOToperatemachine on wet grass. Reduced

traction could causesliding.

11. Choosea low enough speedsetting so that you will not haveto stop or shift on a slope. Tires may lose traction on

slopes eventhough the brakes are functioning properly.

12. DO NOToperatemachine under any condition where

traction, steering or stability is doubtful.

13. Always keepthe machine in gear when going down

slopes. DO NOTshift to neutral (or actuatehydro roll

release)and coast downhill.

Preparation

Protection against Tipovers

Slopesare a major factor relatedto loss-of-control and tip- overaccidents, which can result in severe injury or death.

All slopes require extra CAUTION.If you cannot back up the

slopeor if you feel uneasyon the slope, DONOTmow it. Useextra care with grass catchers or other attachments;

these affect the handling and the stability of the machine.

Referto the Slope Guideat the end of this manual.

1. DO NOToperatemachine on slopes exceeding15 degrees(27% grade).

2. ExerciseEXTREMECAUTIONon slopes above10 degrees(18% grade). Turn blades OFFwhen traveling uphill. Usea slow speed and avoidsudden or sharp turns.

3. DO NOToperatemachine back and forth acrossface of slopes.Operate up and down. Practiceon slopeswith

bladesoff.

4. AVOID starting, stopping or turning on slopes. If machine stops going uphill or tires losetraction, turn bladesOFFand back slowly straight down the slope.

5. STAYALERTfor holesand other hidden hazards.Tall grass can hide obstacles. Keepawayfrom ditches,

washouts, culverts, fencesand protruding objects.

1. Read,understand, and follow instructions and warnings in this manualand onthe machine, engine and

attachments. Know the controls and the proper use of the

machine beforestarting.

2. Only mature, responsible persons shall operatethe machineand only after proper instruction.

3. Dataindicates that operators age 60 and above,are involved in a large percentageof mower-related injuries.

These operators should evaluatetheir ability to operatethe

mower safely enough to protect themselvesand others

from serious injury.

4. Handle fuel with extra care. Fuelsareflammable and

vapors are explosive. Useonly an approved fuel container.

DONOTremovefuel capor addfuel with engine running.

Add fuel outdoors only with engine stopped and cool. Clean spilled fuel from machine. DONOTsmoke.

5. Practice operation of machinewith BLADESOFFto learn

controls and develop skills.

6. Checkthe areato be mowed and removeall objects such

as toys, wire, rocks, limbs and other objects that could cause injury if thrown by bladeor interfere with mowing.

English

www.snapper.com

ImportantOperatorSafetyInstructions(Continued)

Protection againstTipovers

(ContinuedFromPreviousColumn)

7. Keeppeople and pets out of mowing area.Immediately STOPblades,STOPengine, and STOPmachineif anyone

entersthe area.

8. Checkshields, deflectors, switches, blade controls and other safety devices frequently for proper operation and

location.

9. Make sure all safety decals are clearly legible. Replaceif damaged.

10. Protect yourself when mowing andwear safetyglasses, a dust mask, long pants and substantial footwear.

11. Know how to STOPbladesand engine quickly in preparationfor emergencies.

12. Useextra care when loading or unloadingthe machine into a trailer or truck.

13. Checkgrass catchercomponents frequently for signs of

wear or deterioration and replaceas neededto prevent

injury from thrown objects goingthrough weak or worn spots.

Safe Handling of Gasoline

To avoid personal injury or property damage,use extreme

carein handling gasoline.Gasoline is extremelyflammable andthe vapors are explosive.

1. Extinguish all cigarettes, cigars, pipes and other sources of ignition.

2. Useonly an approvedfuel container.

3. DO NOTremove fuel cap or add fuel with the engine running. Allow the engineto cool before refueling.

4. DO NOTrefuelthe machine indoors.

5. DO NOTstore the machineor fuel container inside where

there is an open flame, sparkor pilot light such as on a water heateror other appliances.

6. DO NOTfill fuel containers inside a vehicle or on atruck or trailer bed with aplastic liner. Always place the

containerson the ground away from the vehicle before

filling.

7. Remove gas-poweredequipment from the vehicle or trailer and refuel it on the ground. If this is not possible, then refuel equipment using a portable container, rather than a gasoline dispenser nozzle.

8. DO NOTstart gas poweredequipment in enclosed vehicles or trailers.

9. Keepthe nozzlein contact with the rim of the fuel tank or

container opening at all times until fueling is complete. DO NOTusea nozzle lock-open device

10. If fuel is spilled on clothing, change clothing

immediately.

11. Neveroverfill afueltank. Replacefuel cap andtighten

securely.

Operation

1. Mount and dismount machine from left side. Keepclear

of discharge opening at all times.

2. Start engine from operator's seat, if possible. Makesure bladesare OFFand parking brakeis set.

3. DO NOTleavemachinewith enginerunning. STOP

engine, STOPblades, SETbrake, and Remove key before

leavingoperators position of any reason.

4. DO NOToperatemachine unless properly seatedwith

feet on feet rests or pedal(s).

5. STOPBLADESand ENGINEand makesure bladeshave

stopped before removing grass catcher or unclogging

mower to prevent loss of fingers or hand.

6. Blades must be OFFexceptwhen cutting grass. Set bladesin highest position when mowing over rough

ground.

7. Keephands and feet awayfrom rotating blades underneathdeck. DONOTplace foot on ground while

BLADESareON or machine is in motion.

8. DO NOToperatemachine without entire grasscatcher or

guards in place and working. DO NOTpoint discharge at

people,passing cars, windows or doors.

9. Slow down before turning.

10. Watch out for traffic when near or crossing roadways.

11. STOPengine immediately after striking an obstruction. Inspect machine and repair damagebefore resuming

operation.

12. Operatemachine only in daylight or with good artificial light.

13. ExerciseCAUTIONwhen pulling loads. Limit loadsto

those you can safelycontrol andattach loadsto hitch plate as specified with SNAPPERattachment instructions.

14. Onslopes, the weight of the towed equipment may

cause loss of traction and loss of control. When towing, travel slowly and allow extra distanceto stop.

15. DO NOToperateengine in enclosedareas. Engine

exhaust gasescontain carbon monoxide, a deadly poison.

16. DO NOTdischarge material against a wall or

obstruction. Materialmay ricochet back towards the operator.

17. Only use accessories approvedby the manufacturer.

See manufacturer's instructions for proper operation and

installation of accessories.

English

ImportantOperatorSafetyInstructions(Continued)

Towing

1.Tow only with a machine that hasa hitch designedfor

towing. DONOTattachtowed equipment exceptat the hitch

point.

2. Follow the manufacturer's recommendationfor weight limits for towed equipment and towing on slopes.

3. DO NOTallow children or others on towed equipment.

4. On slopes, the weight of the towed equipment may cause loss of traction and loss of control.

5.Travel slowly and allow extra distanceto stop.

Maintenance

1. DO NOTstore machineor fuel container inside where

fumes may reachan open flame, spark or pilot light such as

in a water heater,furnace, clothes dryer or other gas appliance.Allow engine to cool before storing machinein

an enclosure.Store fuel container out of the reachof children in a well ventilated, unoccupied building.

2. Keepengine free of grass, leavesor excess greaseto reducefire hazardand engineoverheating.

3.When draining fuel tank, drain fuel into an approved container outdoors and away from open flame.

4. Check brakesfrequently; adjust, repair or replaceas needed.

5. Keepall bolts, nuts and screws properly tight. Check that all cotter pins are in proper position.

Maintenance

(ContinuedFromPreviousColumn)

6. Always provide adequate ventilation when running engine. Exhaust gasescontain carbon monoxide, an odorless and deadly poison.

7. Disconnect negative(black) cablefrom battery before performing maintenanceor service. Cranking enginecould

cause injury.

8. DO NOTwork under machinewithout safety blocks.

9. Serviceengine and makeadjustments only when engine is stopped. Removespark plug wire(s) from spark plug(s)

and securewire(s) away from spark plug(s).

10. DO NOTchangeengine governor speedsettings or

overspeed engine.

11. Lubricate machine at intervals specified in manualto prevent controls from binding.

12. Mower blades are sharp and can cut. Wrap the blades

or wear heavy leather gloves and useCAUTIONwhen

handling them.

13. DO NOTtest for spark by grounding spark plug next to

spark plug hole; spark plug could ignite gas exiting engine.

14. Havemachine serviced by an authorized SNAPPER

dealer at least once ayear and havethe dealerinstall any

newsafety devices.

15. Maintain or replacesafetyand instruction labels as necessary.

16. Use only genuine SNAPPERreplacementparts to

assure that original standards are maintained.

English

www.snapper.com

International Pictorials

IMPORTANT:Some of the following pictorials arelocatedonyour unit or on literature supplied with the product. Beforeyou

operatethe unit, learn and understand the purpose for eachpictorial.

14,_ max15°

@ @

max+90Nmax+150N

Figure 1: Safety warning pictorials A - Warning

B - Shield Eyes.Explosive GasesCan

CauseBlindness Or Injury. C - No Sparks,Flames or Smoking. D - Sulphuric Acid Can CauseBlindness

OrSevereBums

E - Flush EyesImmediately With Water.

GetMedical Help Fast.

F- IMPORTANT.ReadOwner'sManual

BeforeOperating ThisMachine.

G- WARNING:Thrown Objects.Keep

BystandersAway. Read User Instructions Before OperatingThis Machine.

H - WARNING:Do Not Use This

Machine OnSlopes Greater Than15 Degrees.

I - DANGER:KeepPeople, Especially

Children,Away From Unit.

J - DANGER:No Step.

K - DANGER:KeepFeetAnd Hands

Away From Rotating Blade.

L- DANGER:KeepHandsAway From

Rotating Blade.

M - DANGER:Disconnect SparkPlug

WireBefore Servicing Unit.

N - WARNING:Hot Surface.

0 - WARNING:UseCaution When

Connecting Or Disconnecting Accessories.

P - WARNING:CrushedFingers.

D3 €1D

8 0 I

Figure2: Control and operatingpictorials A - Enginestart

B- Lights C - Engineoff D - Engine on

E- Brake

English

F- Parkingbrake

G- Clutch H - Slow I - Fast

J - Choke

@ @

K- Oil L - Blade rotation control M- Raise N - Fuel

Assembly

Readand follow theassemblyand adjustment instructionsfor your mower.

Allfastenersare inthe partsbag. Do notdiscard anypartsor material untilthe unit

isassembled.

NOTE:In this instruction book, left and right describethe

location of a part with the operator on the seat.

€_

Parts Bag - Contents

Thefasteners and other looseparts areshown below. Thefasteners areshown full size. The quantity is shown in brackets ().

,_ WARNING:Beforedoinganyassemblyor

maintenanceto the mower, removethe wire from

the sparkplug.

Figure3: Parts bag components A - (2) Carriagebolt

B - (2) Wingnut C- (1) Bolt

English

D- (1) Washer E- (2) Knob F- (2) Washer

G- (1) Keys& ring H- (1) Terminalcover

www.snapper.com

Installing the Seat

AssemblingtheSteeringWheel

Howto Install the Seat

1. Carefully removethe plastic bagfrom the seat. Usethe fasteners shown belowto install the seat. Thefasteners

are shown at full size.

Figure4: Seatparts A - Wingbolt (Also see 'E' in Figure3)

B - Washer(Also see 'F'in Figure 3)

NOTE:Fastenersmay be attachedto seat for shipping purposes, if so removefastenersbefore proceeding.

2. Alignthe holes inthe seat hinge to the holes in the seat (Figure 5). Fastenthe seat to the seat hingewith

the fasteners as shown.

3. Checkthe operating position of the seat. If the seat needsto be adjusted,loosen the two wing bolls. Slide the seat forward or backwardalong the seat adjusting

holesas shown. Tighten the wingbolts (A).

Howto AssembletheSteeringWheel

Tools Required:3/8" SocketWrench Attachthe steering wheel asfollows:

Figure 6: Steering wheelparts A - Screw (Also see 'C' in Figure3)

B- Washer (Also see 'D' in Figure 3)

1. Makesure the front wheels point forward.

2. Slidethe bellows overthe steering post (Figure7).

NOTE:Before attachment of the steering wheel, make surethat the front wheels point forward and are straight. Forproper alignmentof the steering wheel, seeFigure 7.

3. Slidethe steeringwheel onto the steeringpost.

4. Usethe fasteners shown aboveto secure the steering wheel. Thefasteners are shown at full size. Tighten the screw until snug andthen add 1/4 turn. DONOTover tighten.

5. Attach the coverto the steeringwheel.

6. Some models havean optional decal in the parts bag. Attach the decal to the centerof the steeringwheel as

shown.

t_ t_

Figure5: Seat A - Wingbolt

B - Washer C - Seatadjusting hole

D- Seathinge E - Seat

English

MaintenanceFreeBattery

IMPORTANT:Beforeyou attach the battery cables to the

battery, checkthe battery date.The battery datetells if the battery must be charged.

1. Checkthe top and the side of the batteryfor the location of the battery date (Figure9).

2. If the batteryis put into service beforethe batterydate,

Figure 7. Steeringpost A - Screw

B - Washer C - Cover

D- Decal(Optional) E- Steering wheel

F- Bellows G - Steeringpost

H- Straight

the battery cables can be attachedwithout charging the battery.See"How To Install The BatteryCables".

3. If the batteryis put into serviceafterthe batterydate, the batterymust be charged. See"How To Charge The MaintenanceFreeBattery".

Howto Chargethe MaintenanceFree Battery

,_ WARNING:Whenyou chargethe battery, do not

smoke. Keepthebatteryaway from any sparks.The fumesfrom the batteryacid cancausean

explosion.

1. Removethe batteryandbatterytray.

2. Removethe protectivecap from the batteryterminal.

3. Usea12volt battery chargerto chargethe battery. Chargeat a rate of 6 amperesfor one hour. If you do not havea battery charger, have an authorized service center chargethe battery.

4. Install the batteryand batterytray. Make surethe positive (+) terminal is on the left side.

Howto Install the BatteryCables

WARNING:To preventsparks, fastenthe red cable to the positive(+) terminalbeforeyou connectthe

blackcable.

Usethe fasteners shown below to install the batterycables.

Thefasteners are shown at full size.

English

Figure8: Batterycableparts A - Carriagebolt (Also see 'A' in Figure3)

B- Wing nut (Also see 'B' in Figure 3)

www.snapper.com

1. Removethe protective capfrom the batteryterminal.

2. Fastenthe red cable and terminal cover(if equipped) to the positive(+) terminal with the fasteners as shown (Figure9).

3. Fastenthe black cable to the negative(-) terminal with the fasteners as shown.

OperatorPresenceSystem(Seat) Theseat has an Operator PresenceSystemto shut off the

engine whenthe operator leavesthe seat.This system is not intendedfor regular use in stopping the engine or the blade(s). Beforeleaving the seat, movethe blade rotation control to the DISENGAGEposition, shift to neutral, set the parking brake,and stop the engine.

Figure 9: Battery A - Carriagebolt

B - Wingnut C - Blackcable

D - Positive (÷) terminal E - Redcable

F- Battery G - Battery tray H - Terminalcover (Also see 'H' in Figure 3)

HowTo CheckThe Safety InterlockSwitches To check the function of the safetyinterlock switches, follow

the steps below.

1. Checkthe bladerotation controlswitch. Sit in the seat. Depressthe clutch/brake pedal. Move the blade rotation

control to the ENGAGEposition. Turn the ignition switch to the STARTposition. The engine should not

start. If the enginestarts, the switch is defectiveand must be replaced.

2. Checkthe clutch/brakeswitch.Sit in the seat. Movethe blade rotation control to the DISENGAGEposition. DO

NOTdepressthe clutch/brake pedal.Turn the ignition switch to the STARTposition. The engineshould not start. If the enginestarts, the switch is defectiveand must be replaced.

3. Checkthe OperatorPresence System switch.DO NOT sit in the seat. Depressthe clutch!brake pedal. Move

the blade rotation controlto the DISENGAGEposition. Turn the ignition switch to the STARTposition. The

engine should not start. If the engine starts, the switch is defective and must be replaced.

4. Checkthe ReverseMlowing Option(RIVlO)switch.Sit in the seat. Depressthe clutch/brake pedal. Move the blade rotation control to the DISENGAGEposition. Start the engine and move the drive control to the reverse (R) position. With the engine running, move the blade rotation control to the ENGAGEposition. The engine should stop running. If the enginecontinues to run, the RIVlOswitch is defective and must be replaced.

IMPORTANT!BeforeYouStart Mowing

• Checkthe engineoil.

• Fill the fuel tank with gasoline.

• Checkthe air pressure of the tires.

• Checkthe levelof the mower housing.

• Makesure the battery cables areattached,

• Makesurethe wire is attachedto the spark plug.

,_ WARNING:Beforedoing any assemblyor

maintenanceto the mower, removethe wire from thesparkplug.

NOTE:In this instruction book,left and right describe the location of a part with the operator on the seat.

English

Howto Prepare the Engine

NOTE:The enginewas shipped from the factory filled with oil. Checkthe level of the oil. Add oil as needed.

NOTE:The operation of a newenginewill sometimes result in a slight amount of smoke. This smoke is causedby paint

or oil on or around the muffler. This is normal and only expectedduring initial operation.

ChecktheTires

NOTE:The tires may be over inflated for shipment. Checkthe air pressure in the tires. Tires with too much air

pressure will cause the unit to ride rough. Also, the wrong air pressure will keep the mower housing from cutting level.

Recommendedair pressure is 14 PSI (1 BAR).

Checkthe Level of the Mower Deck

A separateengine manual is also included with the unit. See

this engine manual for the manufacturer's instructions for

€_

the type of gasolineand oilto use. Beforeyou use the unit, read the information on safety, operation,maintenance,and storage.

,_ WARNING:Followthe enginemanufacturer's

instructionsfor the type of gasolineand oil touse.

Make sure the levelof cut is still correct. After you mow a short distance, look at the areathat was cut. If the mower

deck does not cut level, seethe instructions on "How To

LevelThe Mower Deck" in the Maintenancesection of this

instruction book.

Alwaysusea safety gasolinecontainer. Do not smokewhenadding gasolineto the engine. When insidean enclosure,do notfill with gasoline. Beforeyouadd gasoline, stopthe engine. Let the enginecoolfor several minutes.

IMPORTANT:This unit is equippedwith an internal

combustion engine and must not be used on or nearany unimproved forest-covered, brush-coveredor grass-covered land unlessthe engine's exhaust system is equippedwith a spark arrester meeting applicablelocal or state laws (if any). If a spark arrester is used, it must be maintained in effective working order bythe operator.

In the State of Californiathe aboveis required by law (Section 4442 of the California Public ResourcesCode).

Otherstates may have similar laws. Federallaws apply on federal lands. Seean Authorized Service Centerfor a spark

arrester for the muffler. In some areas,local law requiresthe useof a resistor spark

plug to control the ignition signals. SeeanAuthorized Service Centerfor a resistor spark plug for the engine.

NOTE:Actual sustained horsepowerwill likely belower due to operating limitations and environmentalfactors.

English

www.snapper.com

FeaturesandControls

A - ThrottleControl/Choke ControlLevers -- Throttle control increasesor decreasesthe speedof the engine.

Chokecontrol engagesthechoke to start a cold engine.

(Note: Thechoke control lever is incorporated into the

throttle control lever on 42" models.) B - Steering Wheel (Removedfor clarity) -- Steersthe unit. C - Brake Pedal-- Quicklystops the unit. D - Deck Lift Lever-- Changesthe height of cut. E - PTOSwitch (46 & 52" Models) -- Starts andstops the

rotation of the blades. F - BladeRotation Control (42" Models) -- Starts andstops

the rotation of the blades.

English

G- Cruise Control -- Locks ground speed in forward. H- Reverse Mowing Option (RMO) -- Allows engagingof

mowing deck whiletraveling in reverse.

I - Ignition Switch -- Starts andstops theengine. (Note: The

headlight switch is incorporated into the ignition switch.) J - Parking BrakeLever -- Engagesthe brake when you

leavethe unit.

K - SpeedControl Pedal-- Changesthe speed and the direction of the unit.

L - Automatic Drive Disconnect (not shown, located behind theunit) -- Disengagesthetransmission.

Operation

Howto Engagethe Blades(42" Models) Theblade rotationcontrolis located abovethe steering

Attachments

wheel (Figure 10). Usethe blade rotationcontrolto engage the blades.

This unit can use many different attachments. For all pull-behind attachments or trailers, the maximum

gross weight is 250 pounds. Grossweight is the weight of the attachment or trailer and any load that might be on or in

it. Do not operateon a slope that is greater than 10 degrees

when using a pull-behind attachmentor trailer. We have included a slope guide in this book to helpyou determine the slope on which you will be operating your unit. Neverallow

someone to stand or ride on or inan attachmentor trailer.

Using Controls

Howto Use theThrottle Control

Usethe throttle controlto increaseor decreasethe speedof the engine.

CAUTION:Alwaysoperatethe enginewith the throttle

controlin the FASTposition. If the enginerunsfor several minutesat slower thanthe FASTposition,the engine and

z..,

transmissionwill overheatandcanbe damaged.

1. TheFASTposition is markedwith a detent. For normal operation and when using a grass bagger, move the throttlecontrolto the FASTposition. For maximum charging of the battery and for a cooler running engine and transmission, operatethe engine in the FAST position.

2. Fortransport and to tow pull behindattachments, control the ground speed with the speedcontrol pedal.

3. Theengine governor is set at the factory for maximum performance. Donot adjust the governor to increase the speed of the engine.

Figure 10: Bladerotation control (42" Models Only) A - DISENGAGEposition

B - Bladerotation control ENGAGEposition

Beforeyou start the engine, makesure the blade rotationcontrol is in the DISENGAGEposition.

Move the blade rotationcontrol to the ENGAGE positionto rotatethe blades. NOTE:If the engine stops when you engagethe blades,

the seat switch is not activated.Make sure you sit in the middle of the seat.Also, make surethe wire is connectedto the seatswitch.

Move the blade rotationcontrolto the DISENGAGE positionto stop the blades. Beforeyou leavethe

operator's position, makesure the blades havestopped rotating.

Beforeyou ride the unit across asidewalkor aroad, move the blade rotationcontrolto the DISENGAGE

position.

WARNING:Alwayskeepyour handsandfeet away from the blade, deflectoropening,and the mower

housingwhenthe engineruns.

English

www.snapper.com

Howto Engagethe Blades(46 & 52" models)

The PTOswitch is above and to the right of the steering wheel (Figure 11). Usethe PTOswitchto engagethe blades.

Figure 11. PTOswitch (46 & 52" models only) A - PTOswitch (shown in the DISENGAGEposition)

Beforeyou start the engine,make sure the PTOswitch is pushed down inthe DISENGAGEposition.

Pullthe PTOswitchup to the ENGAGEpositionto rotatethe blades.

NOTE:If the engine stops when you engagethe blades, the seat switch is not activated. Makesure you sit in

the middle of the seat.Also, make surethe wire is connectedto the seatswitch.

Pushthe PTOswitchdown to the DISENGAGEposition to stop the blades. Beforeyou leavethe operator's position, make sure the blades havestopped rotating.

Beforeyou ride the unit across a sidewalk or a road, push the PTOswitchdown to the DISENGAGEposition.

WARNING:Always keep yourhandsandfeet away fromthe blade, deflectoropening,and the mower housingwhenthe engineruns.

Howto Use the SpeedControlPedal

Thedrive system uses a Hydrostatic Automatic Drive transmission. The Hydrostatic transmission is very easyto operate.This type of drive system does not require a shift lever or a clutch pedal.

Thespeed and direction of travel is controlled by a single speedcontrolpedal operatedwith your right foot. Do not

usethe left brakepedalin normal operation. Only usethe left brake pedalto quickly stop in an emergency.

Driving and Stopping the Unit

Howto Drive Forward

1. Theautomaticdrive disconnectmust be in the DRIVE position (Figure14).

2. Slowly releaseyour leftfoot from the brake pedal.

3. Movethe throttle control to the FASTposition.

4. Slowly push the speedcontrolpedal forward to the desired speed (Figure12).

5. To increaseforward speed,slowly move the speed control pedalforward. To reduceforward speed,slowly releasethe speed control pedal until the unit slows to the desired speed.

English

Figure 12: Speedcontrol operation A - Reverse

B - Neutral C- Forward D- Forward movement

E - Reversemovement F - Speedcontrol pedal

+ 33 hidden pages