Parts Manual fo
r
48" Z-VAC CZT/HZT TWIN BAG CATCHER
MODEL
7063375
COPYRIGHT ©2005
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
Revision 1,
McDonough, GA, 30253 U.S.A.
8/8/2005
Manual No. 7063375
TP 400-5060-1-AT-N
s
PAGE GROUP
4
6
8
12
14
16
Z-Vac CZT/HZT Blower Unit Group
Z-Vac CZT/HZT Blower Mount Group
Z-Vac CZT/HZT Catcher Group
Z-Vac CZT/HZT Catcher Mount Group
Z-Vac CZT/HZT Weight Group
Z-Vac CZT/HZT Decal Group
Table Of Content
Manual No. 706337548" Z-VAC CZT/HZT TWIN BAG CATCHER
3
TP 400-5060-1-AT-N
Z-Vac CZT/HZT Blower Unit Group
Manual No. 7063375 48" Z-VAC CZT/HZT TWIN BAG CATCHER
TP 400-5060-1-AT-N
4
Z-Vac CZT/HZT Blower Unit Group
p
y
Part No Descri
1 3046782 1 WELDMENT, Blower Belt Guard
2 7091121 1 NUT, 1/2-13 Hex Nyloc
3 7090183 1 WASHER, 1/2” Flat SAE
4 3021097 1 PULLEY, A Groove Idler, Steel
5 7044995 1 IDLER STUD (3/8-24 thread)
6 7091804 2 FLAT WASHER, 9/16 Type Narrow
7 7014409 2 FLANGE BEARING, 9/16” I.D. (powdered metal)
8 7010776 1 RETAINING RING, 1/2”
9 3046824 1 BELT RETAINER, Idler
10 7091527 1 SCREW, 5/16-18 x 1-1/4” Hex Head Cap, GR5
11 3047253 1 WELDMENT, Idler Arm
12 7091601 1 NUT, 5/16-18 Hex Flange Lock
13 7091218 1 SCREW, 1/2-13 x 2-1/2” Hex Head Cap, GR5
14 3046781 1 WELDMENT, Blower Housing
15 3046853 1 BACK PLATE, Blower
16 7091541 7 SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap
17 3022832 2 BEARING, Pillow Block, Blower (includes grease fitting)
18 7090839 8 NUT, 7/16-14 Hex Center Lock, GR5 or B
19 3031920 4 SCREW, 7/16-14 x 1-1/2” Hex Head Cap, GR5
20 3046854 1 IMPELLER, Fast Vac Blower (weldment)
21 3031919 4 SCREW, 7/16-14 x 1-1/4” Hex Head Cap, GR5
22 7091619 2 NUT, 3/8-16 Hex Flange Lock Was 90613
23 3046813 2 BELT RETAINER
24 3043613 2 PULLEY, Flat Idler, 2-3/4” O.D.
25 7090122 9 WASHER, 3/8” Flat SAE
26 7091560 1 SCREW, 3/8-16 x 2-1/4” Hex Head Cap, GR5
27 7091518 1 NUT, 3/8-24 Hex Nyloc
28 7091305 1 SCREW, 3/8-16 x 2” Hex Head Cap, GR5
29 7092111 3 U-CLIP, 5/16-18
30 7091541 3 SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap
tionItem Qt
Note
Footnotes:
Manual No. 706337548" Z-VAC CZT/HZT TWIN BAG CATCHER
5
TP 400-5060-1-AT-N
Z-Vac CZT/HZT Blower Mount Group
Manual No. 7063375 48" Z-VAC CZT/HZT TWIN BAG CATCHER
TP 400-5060-1-AT-N
6
Z-Vac CZT/HZT Blower Mount Group
p
y
Part No Descri
1 3036323 1 BELT, A Section, 91.125” effective length
2 3037161 1 WELDMENT, Belt Cover, Deck
3 ----- -- -- NOT USED
4 7091537 2 WING LOCKNUT 5/16-18
5 3037162 1 BELT GUARD
6 3046806 1 PULLEY, Blower Input
7 7078298 1 PULLEY, Spindle
8 3027505 1 WELDMENT, Blower Mount
9 3027507 1 WELDMENT, Guard Support Bracket
10 7091541 4 SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap
11 3027508 1 WELDMENT, Deck Mount Bracket
12 7091304 2 SCREW, 3/8-16 x 1” Hex Head Cap, GR5
13 7091619 4 NUT, 3/8-16 Hex Flange Lock Was 90613
14 3032118 1 WELDMENT, T-Handle Pin
15 7091527 1 SCREW, 5/16-18 x 1-1/4” Hex Head Cap, GR5
16 7091601 1 NUT, 5/16-18 Hex Flange Lock
17 7090951 2 NUT, 5/16-18 Hex Large Flange Center Lock
18 3020807 1 SPRING, Idler, Fast Vac
19 7012315 1 KEY, 1/4 Square x 1.44
20 7091617 1 SCREW, 3/8-16 x 6” Hex Head Cap, GR5
tionItem Qt
Note
Footnotes:
Manual No. 706337548" Z-VAC CZT/HZT TWIN BAG CATCHER
7
TP 400-5060-1-AT-N
Z-Vac CZT/HZT Catcher Group
Manual No. 7063375 48" Z-VAC CZT/HZT TWIN BAG CATCHER
TP 400-5060-1-AT-N
8
Z-Vac CZT/HZT Catcher Group
p
y
Part No Descri
1 3046861 1 ASSEMBLY, 2 Bag Cover and Screen (includes Item No. 1a, 5, 12, 13,
1a 1704033 1 CATCHER TOP, 2 Bag
2 1704180 2 WINDOW, Cover
3 1704405 1 DECAL, Safety, Grass Bag
4 1667248 6 CLIP, Canoe
5 1910531 4 WASHER, .188 Rivet
6 7090922 1 SCREW, #10-32 x 1-1/2 Hex Washer Head Machine w/Nylon
Patch
7 7091702 3 WASHER, .19 x .38 x .06 Flat
8 3021670 1 STRAP, Rubber
9 7090376 5 NUT, #10-32 Hex Nyloc
10 3022838 1 KNOB
11 2960367 2 PIN, Round Head
12 1703700 1 SCREEN
13 1704057 1 SEAL, Clip
14 7091578 4 POP RIVET, 3/16 x .265 Alum.
15 1675707 2 TUBE CLIP, Grass Bag
16 1703807 2 HANGER, Grass Bag
17 7090316 4 BOLT, 5/16-18 x 3/4” Square Neck Carriage, GR5
18 1703855 2 HOOP, Grass Bag
19 3000847 2 GRASS BAG
20 1672023 2 CLAMP, Grass Bag
21 7090187 4 WASHER, 5/16” Split Lock
22 7091511 4 NUT, 5/16-18 Hex, GR5 or B
23 3022875 1 HOSE CLAMP, Upper
24 3022833 1 HOSE, Snapper Fast Vac
25 3022876 1 HOSE CLAMP, Lower, Fast Vac
26 7091757 1 SCREW, #10-24 x 1-1/4” Hex Head Cap, GR5
27 7091290 1 NUT, #10-24 Hex Nyloc
28 7091503 2 HAIR PIN, 1.6 Was 15067
29 1703822 1 CROSS ASSEMBLY
30 7091530 5 BOLT, 1/4-20 x 3/4” Carriage
31 7091084 2 SCREW, 1/4-20 x 3/8” Hex Washer Self-Tap
32 1704507 1 STRAP, Tube Support
33 7091702 1 WASHER, .191 I.D. Flat
34 3046722 1 WELDMENT, Hose Adapter/Deflector
35 7091098 3 WASHER, 1/4” Flat Was 90598
36 7091603 5 NUT, 1/4-20 Hex Nyloc
tionItem Qt
Note
14, 42, 43, 44, 45)
Footnotes:
Manual No. 706337548" Z-VAC CZT/HZT TWIN BAG CATCHER
9
TP 400-5060-1-AT-N
Z-Vac CZT/HZT Catcher Group
Manual No. 7063375 48" Z-VAC CZT/HZT TWIN BAG CATCHER
TP 400-5060-1-AT-N
10
Z-Vac CZT/HZT Catcher Group
p
y
Part No Descri
37 7090883 3 SCREW, 10F x 7/8” Pan Head Cross Recess
38 7091241 3 POP RIVET, 3/16”
39 1704075 1 SUPPORT, Tube
40 3046774 1 SEAL, 2 Bag Catcher
41 1704508 1 BRACKET, Seal
42 1960400 1 SCREW, #10-12 x 5/8 Hex Washer Self-Tap
43 7090052 1 WASHER, 1/4 Split Lock
44 1705876 1 CABLE, Double Loop
45 1933886 1 NUT, Speed
tionItem Qt
Note
Footnotes:
Manual No. 706337548" Z-VAC CZT/HZT TWIN BAG CATCHER
11
TP 400-5060-1-AT-N
Z-Vac CZT/HZT Catcher Mount Group
Manual No. 7063375 48" Z-VAC CZT/HZT TWIN BAG CATCHER
TP 400-5060-1-AT-N
12
Z-Vac CZT/HZT Catcher Mount Group
p
y
Part No Descri
1 3046687 1 WELDMENT, Bagger Mount Frame
2 7091086 4 SCREW, 3/8-16 x 3/4” Hex Head Cap, GR5
3 7091619 4 NUT, 3/8-16 Hex Flange Lock
4 3046831 1 ARM, Cover Latch
4a 3046829 1 REINFORCEMENT PLATE
5 7091318 2 SCREW, 5/16-18 x 3/4” Hex Head Cap, GR5
6 7091601 2 NUT, 5/16-18 Hex Flange Lock
7 3046995 1 WELDMENT, Bumper Mounting Plate
8 7050551 2 STANDOFF, Bumper Mount
9 7091318 4 SCREW, 5/16-18 x 3/4” Hex Head Cap
10 7091601 4 NUT, 5/16-18 Hex Flange Lock
11 3046693 1 ROD, Support
12 7091503 1 HAIRPIN, Clip Was 15067
-- 3039122 1 EXHAUST DEFLECTOR (Not Shown)
-- 3039123 1 MUFFLER CLAMP (Not Shown)
tionItem Qt
Note
Footnotes:
Manual No. 706337548" Z-VAC CZT/HZT TWIN BAG CATCHER
13
TP 400-5060-1-AT-N
Z-Vac CZT/HZT Weight Group
Manual No. 7063375 48" Z-VAC CZT/HZT TWIN BAG CATCHER
TP 400-5060-1-AT-N
14
Z-Vac CZT/HZT Weight Group
p
y
Part No Descri
1 7078288 5 WEIGHT, 27 x 5 x 1/4”
2 7078289 4 WEIGHT, 27 x 2-1/2 x 1/4”
3 7091821 2 BOLT, 1/2-13 x 3 Hex Head
4 7090254 2 WASHER, 1/2 Split Lock
5 7091316 2 NUT, 1/2-13 Hex
tionItem Qt
Note
Footnotes:
Manual No. 706337548" Z-VAC CZT/HZT TWIN BAG CATCHER
15
TP 400-5060-1-AT-N
Z-Vac CZT/HZT Decal Group
Manual No. 7063375 48" Z-VAC CZT/HZT TWIN BAG CATCHER
TP 400-5060-1-AT-N
16
Z-Vac CZT/HZT Decal Group
p
y
Part No Descri
1 3046944 1 DECAL, Fast-Vac
2 1704405 1 DECAL, Safety, Grass Bag
3 3046850 1 DECAL, Danger, Fast-Vac
4 3046851 1 DECAL, Warning, Fast-Vac
5 3046883 1 DECAL, Warning, Fast-Vac
tionItem Qt
Note
Footnotes:
Manual No. 706337548" Z-VAC CZT/HZT TWIN BAG CATCHER
17
TP 400-5060-1-AT-N
Parts Manual fo
r
48" Z-VAC CZT/HZT TWIN BAG CATCHER
RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS
COPYRIGHT ©2005
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS
WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE
AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE
SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.
McDonough, GA, 30253 U.S.A.
Revision 1,
8/8/2005
Manual No. 706337 5
TP 400-5060-1-AT-N
Loading...