Specifications and Main Features
36” Tiller Specifications:
- Overall Tiller Width is approximately 31*
- Total Approximate Weight: 100 kg
- Shipped Weight: 104 kg
- Tilling Width: 31 inches
- Several Tiller Tips: 11
- Operating Depth: Maximum 5 inches
- Material Used for Tines: Carbide Steel
- Torque for Tine Retaining Bolt: 65-75 N-M
42” Tiller Specifications:
- Tiller Width is approximately: 110cm
- Weight(Estimated): 91 kg
- Shipped Weight is approximately: 102 kg
- Width Used For Till Tilling: 4 cm
- Total Tiller Tips: 11
- Operation Moderation to Maximum:146-178 mm
- Material used for Tines: Carbide steel
- Point Torque for Tine Retaining Bolt: 45 – 55 N-M
- PM Tine Speed: Operating Tine Speed is 190 rpm which makes PTO operate at 2000 RPM.
48” Tiller Specifications:
- Total Overall Width: 41 inches
- Total Weight: 145 kg
- Shipping Weight: 147kg
- Current Max Tilling Width: is 4 inches
- Number of Tiller Tips: 4
- Tilling Depth: Maximum 3 CM
- Operating Material : Steel as this increases the strength
- Shielding and other Retaining Bolts: 45 - 60 N-M Tine Torque Bolts: 4 Tine Bolts, 4 Tine Speeds
- x Tine Speed: 80 RPM PTO makes speed154.2 K.
Frequently Asked Questions
Q1: What does PTO stand for?
A1: PTO stands for Power Take-Off and refers to a means of extracting power from an operating engine.
Q2: What is the greatest digging depth of the tillers?
A2: All models (36", 42”, and 48”) have a maximum tilling depth of 8 inches.
Q3: What kind of steel is used in constructing the tines?
A3: Tines are constructed using premium long-lasting heat-treated high carbon steel.
Q4: What is the weight of 48” tiller?
A4: The weight of a 48” tiller is approximately over 320 lbs.
Q5: How much does the 42” tiller weigh for transportation?
A5: The 42" tiller weighs about 230 lbs for transport.
User Manual
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24
Page 25
Page 26
Page 27
Loading...