Snapper 7016RT, 6016RT User Manual
Parts Manual fo
r
)
)
INTERMEDIATE REAR TINE TILLER
6 & 7 HP 16" TWO SPEED
MODEL
6016RT (7800052
7016RT (7800053
COPYRIGHT ©2006
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
Revision 2,
McDonough, GA, 30253 U.S.A.
10/11/2006
Manual No. 7006257
TP 400-5131-2-RT-N
s
PAGE GROUP
4
6
10
14
16
18
20
22
24
Handle Bar Group
Engine, Belts & Wheels Group - 6 HP
Engine, Belts & Wheels Group - 7 HP
Transmission Group
Wheel & Tiller Shaft Group
Hood, Drag Stake & Tine Group - 6 HP
Hood, Drag Stake & Tine Group - 7 HP
Decal Group
Hiller/Furrower Attachment
Table Of Content
Manual No. 7006257INTERMEDIATE REAR TINE TILLER
3
TP 400-5131-2-RT-N
Handle Bar Group
Manual No. 7006257 INTERMEDIATE REAR TINE TILLER
TP 400-5131-2-RT-N
4
Handle Bar Group
p
y
Part No Descri
1 1716699 2 HANDLE GRIP, Drive Control Lever
2 1722325 1 LEVER, Drive Control
3 1719038 2 HANDLE GRIP
4 1960392 4 SCREW, Pan Head Phillips #10-24 x 1/2
5 1716723 1 BRACKET, Drive Control Lever LH
6 1933896 6 NUT, Hex Nylock, 10-24
7 1716720 1 SPRING, Forward Cable Adjustment
8 2820438 4 NUT, Hex Jam, 5/16-24
9 1723692 1 HANDLE BAR ASSEMBLY
10 1719037 2 CABLE ASSEMBLY
11 1719063 2 C-CLAMP
12 1921332 3 CAPSCREW, Hex Head, 5/16-18 x 3/4
13 1723703 1 PIN, Detent
14 1723695 1 PIVOT ROD ASSEMBLY
15 1723696 1 PIVOT MOUNT ASSEMBLY
16 1921210 4 CAPSCREW, Hex Head, 3/8-16 x 1
17 1916950 5 NUT, Hex, 3/8-16
18 1924940 2 WASHER
19 1723694 1 PIVOT, Handle Bar Mount
20 1920415 1 CAPSCREW, Hex Head, 3/8-16 x 1-1/4
21 1716770 1 WASHER
22 1922648 1 CAPSCREW, Hex Head 3/8-16 x 4
23 1723697 1 PIVOT, Hnadle Bar Height Adjustment
24 1960044 2 WASHER
25 1716729 1 LINK, Reverse
26 1921977 1 CAPSCREW, Hex Head, 5/16-18 x 1-1/4
27 1716725 1 HANDLE, Reverse
28 1716704 1 BUSHING, Pivot, 5/16
29 1716722 1 BRACKET, Drive Control Lever RH
30 1935048 2 NUT, Hex Flange Tow Way Lock, 5/16-18
31 1921332 4 BOLT, Hex Flange Head, 5/16-18 x 3/4
tionItem Qt
Note
Footnotes:
Manual No. 7006257INTERMEDIATE REAR TINE TILLER
5
TP 400-5131-2-RT-N
Engine, Belts & Wheels Group - 6 HP
Manual No. 7006257 INTERMEDIATE REAR TINE TILLER
TP 400-5131-2-RT-N
6
Engine, Belts & Wheels Group - 6 HP
p
y
Part No Descri
1 1722157 1 BRACKET, Engine
2 1723711 1 SPACER, Engine
3 1722158 1 PULLEY, Engine 2 Groove
4 1716770 1 WASHER
5 1917356 2 LOCKWASHER, Spring, 5/16
6 1921515 2 CAPSCREW, Hex Head, 5/16-24 x 3/4
7 2805850 2 KEY, PARALLEL PLN, 3/16 x 3/16 x 1-3/32
8 1960345 1 CAPSCREW, Hex Head, 3/8-24 x 2
9 1716728 2 YOKE, Cable
10 1722159 1 ARM, Pivot
11 1716702 2 PIN, Link Forward/Reverse
12 1722162 1 GUIDE, Belt Reverse
13 1924940 4 WASHER, 3/8
14 1716805 1 PULLEY, Idler Reverse
15 1916950 2 NUT, Hex Center Lock, 3/8-16
16 1716703 2 PIN, Cotter
17 1723710 1 BOLT, Flat Head, 5/16-24 x 1-1/2
18 1722160 1 PIVOT
19 1960044 3 WASHER, 5/16
20 1716766 1 V-BELT, Forward
21 1716802 2 SPRING, Idler Arm
22 1935048 3 NUT, Hex Flange Lock, 5/16-18
23 1921332 3 BOLT, Hex Flange Head, 5/16-18 x 3/4
24 1722161 1 GUIDE, Belt Forward
25 1722165 1 COVER, Belt
26 1722163 1 PULLEY, Transmission 2 Groove
27 1721525 1 WHEEL & TIRE ASSEMBLY TILLER, Left
28 1721524 1 WHEEL & TIRE ASSEMBLY TILLER, Right
29 1716776 2 PIN, Lock
30 1716803 1 PULLEY, Forward Idler
31 1722166 1 ARM, Idler Forward
32 1722168 1 SCREW, Hex Socket Shoulder, 5/16-18 x 3/8
33 1925690 1 CAPSCREW, Hex Head, 5/16-18 x 3-1/2
34 1722144 1 V-BELT, Reverse
35 1922127 4 CAPSCREW, Hex Head, 5/16-18 x 1-3/4
36 1 ^ ENGINE, 6HP B&S INTEK, Model #126412-0023-E2
37 1721528 1 ^^ BUMPER, Guard (Optional)
tionItem Qt
Note
Footnotes:
^See your local Briggs & Stratton dealer for Parts & Service.
^^Bumper is not standard with the 6HP tiller, but it is an available option, order the bumper guard (Ref# 37), 4 nuts (Ref#
22) and 4 capscrews (Ref# 35).
Manual No. 7006257INTERMEDIATE REAR TINE TILLER
7
TP 400-5131-2-RT-N
Engine, Belts & Wheels Group - 6 HP
Manual No. 7006257 INTERMEDIATE REAR TINE TILLER
TP 400-5131-2-RT-N
8
Engine, Belts & Wheels Group - 6 HP
p
y
Part No Descri
38 1919384 1 WASHER
39 2860164 1 WASHER
tionItem Qt
Note
Footnotes:
^See your local Briggs & Stratton dealer for Parts & Service.
^^Bumper is not standard with the 6HP tiller, but it is an available option, order the bumper guard (Ref# 37), 4 nuts (Ref#
22) and 4 capscrews (Ref# 35).
Manual No. 7006257INTERMEDIATE REAR TINE TILLER
9
TP 400-5131-2-RT-N
Loading...