Snapper 5901182 User Manual

Parts

p

Manual

Hydrocut Export

Walk-Behind Mower

S/N: 2000856282 & Above

Models:

5901182 (HC32KAV13E) Hydro-Drive PRO (S/N: 2000856282 & Above)

Briggs and Stratton Power Products Group, LLC

5375 North Main Street Munnsville, NY 13409 USA 800-933-6175

Descri

tion:

5101227

Rev. Date:

TP 400-7336-B-HC-SN

10/2008

BRevision

Table Of Content

s

g

.

g

.

MODEL COMPONENTS PAGE

Engine Frame & Handle Bars Group - Electric Start ..........................................................................................................

Fuel Supply Hose & Tank Replacement Parts Group ........................................................................................................

Fuel Tank & Mount Group ..................................................................................................................................................

En

ine, PTO, & Deck Drive Idler Group .............................................................................................................................

Motion Control, Parkin

Motion Control, Parking Brake, & Operator Presence Group (S/N: 2013136020 & Below) ...............................................

Transaxle & Mount Group ..................................................................................................................................................

Transaxle - SERVICE PARTS ...........................................................................................................................................

Tire & Wheel Group ...........................................................................................................................................................

Decals - Safety & Instruction ..............................................................................................................................................

Decals - Brand & Model ......................................................................... ............................................................................

32" Mower Deck - Frame, Casters, & Shield Group ...........................................................................................................

32" Mower Deck - Hei

32" Mower Deck - Housing, Spindles, Blades, & Pulleys Group .................................................................. ......................

Electrical Group - Electric Start ..........................................................................................................................................

Electrical Schematic - Electric Start ...................................................................................................................................

Brake, & Operator Presence Group (S/N: 2013136021 & Above) ...............................................

ht Adjustment Group .....................................................................................................................

Torque Specification Chart ............................................................................................. Inside Back Cover

10 12 16 20 22 24 26 28 30 32 34 36 38

4 6 8

Engine Frame & Handle Bars Group - Electric Start

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

4

TP 400-7336-B-HC-SN

Engine Frame & Handle Bars Group - Electric Start

PART NO. DESCRIPTIONREF NO. QTY.

1 5022180 1 SWITCH, BLADE ENGAGEMENT 2 5022222 1 RING, SWITCH RETAINER 3 5025035 1 NUT, 3/8-24 HEX 4 5046501 1 CABLE, CHOKE CONTROL, 47” (Includes Ref. No. 3) 5 5025010X6 4 BOLT, 1/4-20 X 3/4” GD5 YZ (2 for battery terminals - not shown) 6 5020927 1 SWITCH, IGNITION, 6 POST (Includes Ref No. 7 - 9) 7 5022789 1 KEY, Ignition, Molded Set 8 5022790 1 COVER

9 5022791 1 PLASTIC NUT 10 5047629 1 CABLE, THROTTLE CONTROL, 48” 11 5021841 2 GRIP, FOAM, .940” X 5” X .187” 12 5025391 2 NUT, 1/4-20 HEX NYLOCK FLANGE 13 5061279B 1 WELD, HANDLE BAR, TD 14 5025271 2 NUT, #10-24 HEX NYLON LOCK 15 5021670 1 STRAP, RUBBER 16 5025270 2 SCREW, #10-24 X 1” RS 17 5046188 1 BATTERY BOX W/ DRAIN 18 - 1 BATTERY, WET ( BCIU1, 340 CCA) 19 5022308 4 BODY CLIP, 5/16-18 X 1/2” DEEP 20 5047735B 1 SHIELD, REAR 21 5025011X8 4 BOLT, 5/16-18 X 1” GD5 YZ 22 5025155 4 WASHER, 5/16” SAE 23 5049229B 1 WELD, ENGINE DECK, HC36 24 5025126 2 NUT, 1/4-20 HEX SERR. FLANGE (for battery terminals - not shown)

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

5

TP 400-7336-B-HC-SN

Fuel Supply Hose & Tank Replacement Parts Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

6

TP 400-7336-B-HC-SN

Fuel Supply Hose & Tank Replacement Parts Group

PART NO. DESCRIPTIONREF NO. QTY.

1 5020835 6 CLAMP, HOSE, EXTERNAL, 1/2 - RED

2 5050831X7 1 HOSE, 1/4” FUEL, 7.00” (supplied with engine)

3 5021178X3 1 FUEL FILTER (supplied with engine)

4 5050831X35 1 HOSE, 1/4” FUEL, 35.00”

5 5050833X23 1 WIRE LOOM, 1/2” ID, 23” LONG

6 5021235 1 VALVE, FUEL SHUT OFF

7 5050831X5 1 HOSE, 1/4” FUEL, 5.00”

8 5023061 1 ELBOW FITTING

9 1726400 1 GROMMET 10 5023069 2 HOSE CLAMP 11 5050925X20 1 HOSE, 20” 12 5023067 1 SCREEN FITTING

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

7

TP 400-7336-B-HC-SN

Fuel Tank & Mount Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

8

TP 400-7336-B-HC-SN

Fuel Tank & Mount Group

PART NO. DESCRIPTIONREF NO. QTY.

1 5022158 1 CAP, FUEL TANK, 3-1/2” NECK

2 5048149 1 TANK, FUEL

3 5025013X6 4 BOLT, 3/8-16 X 3/4” GD5 YZ

4 5025156 8 WASHER, 3/8” SAE

5 5025013X10 4 BOLT, 3/8-16 X 1-1/4” GD5

6 5049228B 2 MOUNT, FUEL TANK

7 5025394 4 NUT, 3/8-16 HEX NYLOCK FLANGE

8 5025171 4 WASHER, 3/8” SPLIT LOCK

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

9

TP 400-7336-B-HC-SN

Engine, PTO, & Deck Drive Idler Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

10

TP 400-7336-B-HC-SN

Engine, PTO, & Deck Drive Idler Group

PART NO. DESCRIPTIONREF NO. QTY.

1 - 1 * ENGINE, 13HP KAW ELEC START Mod. FH381V-BS28-R

2 5021379 1 GROMMET, 7/8

3 5021077 1 GROMMET, 1/2

4 5025011X12 5 BOLT, 5/16-18 X 1-1/2” GD5 YZ

5 5025139 4 NUT, 5/16-18 Hex Large Serrated Flange

6 5020876B 2 BUSHING, BRASS, 3/4 X 1 X 1

7 5047661B 1 DECK DRIVE IDLER ARM

8 5025160 1 WASHER, 3/4” SAE

9 5020863 1 C-CLIP 10 5021369 1 IDLER PULLEY 11 5025158 1 WASHER, 1/2” SAE 12 5025018X20 1 BOLT, 1/2-20 X 2-1/2” GD5 YZ 13 5025098 1 NUT, 1/2-20 Hex Nylon Lock 14 5047632 1 BOLT, CRANKSHAFT, 7/16”X2.75 15 5042132 1 SPACER, .45 x 1.62 x .37 16 1717664 1 CLUTCH,#504586, ELECTRIC, OGURA JD-11 17 5050407X3 1 KEY, 1/4 SQ. X 2 18 5025011X18 1 BOLT, 5/16-18 X 2-1/4” GD5 YZ 19 5025155 5 WASHER, 5/16” SAE 20 5021103 1 SPRING, Extension 21 5025155 5 WASHER, 5/16” SAE 22 5025011X6 1 BOLT, 5/16-18 X 3/4” GD5 23 5023173 1 CLAMP, HOSE, 1.000 DIA. 24 5025127 1 NUT, 5/16-18 HEX SERRATED FLANGE (SMALL) 25 5050857X10P5 1 HOSE, 1/2” PUSH-ON, 10.50” 26 5021392 1 CLAMP, #6 HOSE, STAINLESS 27 5025057 4 NUT, 5/16-18 HEX NYLON LOCK 28 5049340B 1 BRACKET, MUFFLER GUARD - RED 29 5049338B 1 WELD, MUFFLER GUARD - RED 30 5022665 2 BODY CLIP, 1/4-20 X 1/2” DEEP (Not Shown) 31 5025249 1 BOLT, M8-1.25 X 20MM GD8.8 (Not Shown)

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

11

TP 400-7336-B-HC-SN

Motion Control, Parking Brake, & Operator Presence Group (S/N: 2013136021 & Above)

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

12

TP 400-7336-B-HC-SN

Motion Control, Parking Brake, & Operator Presence Group (S/N: 2013136021 & Above)

PART NO. DESCRIPTIONREF NO. QTY.

1 5025510 1 GRIP, FOAM, 1/4" X 1

2 5061278B 1 WELD, BRAKE CONTROL

3 5022438 1 SWITCH, Plunger, NO/NO

4 5025029 8 NUT, #10-24 HEX

5 5021769 3 SWITCH, Plunger, NC

6 5025179X4 8 SCREW, #10-24 X 1/2” ROUND PHILLIPS

7 5021098 4 BEARING, BRONZE FLANGE, 3/4

8 5061495 1 ROD, PARKING BRAKE LINKAGE

9 5020047 3 COLLAR, 5/16” SET 10 5025392 9 NUT, 5/16-18 HEX NYLOCK FLANGE 11 5025155 8 WASHER, 5/16” SAE 12 5025011X6 8 BOLT, 5/16-18 X 3/4” GD5 13 5025100 2 NUT, 3/8-16 HEX SIDE LOCK 14 5025010X8 2 BOLT, 1/4-20 X 1”, GD5 15 5061693 4 SPACER, SLIDE 16 5061691 1 HANDLE, RUBBER HYDROCUT - LH 17 5061702 1 HANDLE, RUBBER HYDROCUT - RH (Not Shown) 18 5061713B 2 ACTUATOR, SWITCH 19 5025126 4 NUT, 1/4-20 HEX SERR. FLANGE 20 5025010X6 6 BOLT, 1/4-20 X 3/4” GD5 YZ 21 5061689 1 MOUNT, MOTION CONTROLS - LH 22 5061692 1 MOUNT, MOTION CONTROLS - RH (Not Shown) 23 5025010X5 2 BOLT, 1/4-20 X 5/8” GD5 YZ 24 5025223 2 BOLT, 3/8-16 X 1.0”, 1/2” SHOULDER 25 5061683B 1 WELD, ARM CONTROL, LH 26 5061685B 1 WELD, ARM CONTROL, RH (Not Shown) 27 5025213X8 7 PIN, CLEVIS, 5/16” X 1 28 5025201X6 7 PIN, COTTER, 3/32” X 3/4 29 5020979 10 CLEVIS, 5/16-24, PLASTIC 30 5025033 8 NUT, 5/16-24 HEX 31 5047642 2 ROD, THUMB CONTROL LINKAGE 32 5025128 1 NUT, 3/8-16 HEX SERRATED FLANGE 33 5025139 1 NUT, 5/16-18 HEX SERRATED FLANGE (LARGE) 34 5023157 1 BOLT, 5/16-18 X 1 1/2” FLANGE 35 5047697B 1 WELD, CONTROL SHAFT 36 5047740 1 LINK, STUD 37 5025013X32 1 BOLT, 3/8-16 X 4” GD5 YZ 38 5049352 1 SPRING, EXT, 3.875 X .70 LOOP 39 5048328 1 LINK, PARKING BRAKE LOWER 40 5022481 2 COLLAR, 1/4” SET 41 5047732 1 LEVER, DUMP VALVE

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

13

TP 400-7336-B-HC-SN

Motion Control, Parking Brake, & Operator Presence Group (S/N: 2013136021 & Above)

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

14

TP 400-7336-B-HC-SN

Motion Control, Parking Brake, & Operator Presence Group (S/N: 2013136021 & Above)

PART NO. DESCRIPTIONREF NO. QTY.

42 5025391 6 NUT, 1/4-20 HEX NYLOCK FLANGE 43 5025394 1 NUT, 3/8-16 HEX NYLOCK FLANGE 44 5025154 6 WASHER, 1/4” SAE 58 5061713B 2 ACTUATOR, SWITCH (S/N: 2013136020 & Below) 58 5061713B 2 ACTUATOR, SWITCH (S/N: 2013136020 & Below)

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

15

TP 400-7336-B-HC-SN

Motion Control, Parking Brake, & Operator Presence Group (S/N: 2013136020 & Below)

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

16

TP 400-7336-B-HC-SN

Motion Control, Parking Brake, & Operator Presence Group (S/N: 2013136020 & Below)

PART NO. DESCRIPTIONREF NO. QTY.

1 5025510 1 GRIP, FOAM, 1/4" X 1

2 5061278B 1 WELD, BRAKE CONTROL

3 5022438 1 SWITCH, Plunger, NO/NO

4 5025029 8 NUT, #10-24 HEX

5 5021769 3 SWITCH, Plunger, NC

6 5025179X4 8 SCREW, #10-24 X 1/2" ROUND PHILLIPS

7 5021098 4 BEARING, BRONZE FLANGE, 3/4

8 5061495 1 ROD, PARKING BRAKE LINKAGE

9 5020047 3 COLLAR, 5/16" SET 10 5025392 9 NUT, 5/16-18 HEX NYLOCK FLANGE 11 5025155 8 WASHER, 5/16" SAE 12 5025011X6 8 BOLT, 5/16-18 X 3/4" GD5 13 5025100 2 NUT, 3/8-16 HEX SIDE LOCK 14 5025010X8 2 BOLT, 1/4-20 X 1", GD5 15 5061693 4 SPACER, SLIDE 16 5061691 1 HANDLE, RUBBER HYDROCUT - LH 17 5061702 1 HANDLE, RUBBER HYDROCUT - RH (Not Shown) 18 5061713B 2 ACTUATOR, SWITCH 19 5025126 4 NUT, 1/4-20 HEX SERR. FLANGE 20 5025010X6 6 BOLT, 1/4-20 X 3/4" GD5 YZ 21 5061689 1 MOUNT, MOTION CONTROLS - LH 22 5061692 1 MOUNT, MOTION CONTROLS - RH (Not Shown) 23 5025010X5 2 BOLT, 1/4-20 X 5/8” GD5 YZ 24 5025223 2 BOLT, 3/8-16 X 1.0", 1/2" SHOULDER 25 5061683B 1 WELD, ARM CONTROL, LH 26 5061685B 1 WELD, ARM CONTROL, RH (Not Shown) 27 5025213X8 7 PIN, CLEVIS, 5/16" X 1 28 5025201X6 7 PIN, COTTER, 3/32" X 3/4 29 5020979 10 CLEVIS, 5/16-24, PLASTIC 30 5025033 8 NUT, 5/16-24 HEX 31 5047642 2 ROD, THUMB CONTROL LINKAGE 32 5025128 1 NUT, 3/8-16 HEX SERRATED FLANGE 33 5025139 1 NUT, 5/16-18 HEX SERRATED FLANGE (LARGE) 34 5023157 1 BOLT, 5/16-18 X 1 1/2" FLANGE 35 5047697B 1 WELD, CONTROL SHAFT 36 5047740 1 LINK, STUD 37 5025013X32 1 BOLT, 3/8-16 X 4" GD5 YZ 38 5049352 1 SPRING, EXT, 3.875 X .70 LOOP 39 5048328 1 LINK, PARKING BRAKE LOWER 40 5022481 2 COLLAR, 1/4" SET 41 5047732 1 LEVER, DUMP VALVE

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

17

TP 400-7336-B-HC-SN

Motion Control, Parking Brake, & Operator Presence Group (S/N: 2013136020 & Below)

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

18

TP 400-7336-B-HC-SN

Motion Control, Parking Brake, & Operator Presence Group (S/N: 2013136020 & Below)

PART NO. DESCRIPTIONREF NO. QTY.

42 5025391 6 NUT, 1/4-20 HEX NYLOCK FLANGE 43 5025394 1 NUT, 3/8-16 HEX NYLOCK FLANGE 44 5025154 6 WASHER, 1/4" SAE

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

19

TP 400-7336-B-HC-SN

Transaxle & Mount Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

20

TP 400-7336-B-HC-SN

Transaxle & Mount Group

PART NO. DESCRIPTIONREF NO. QTY.

1 5025394 1 NUT, 3/8-16 HEX NYLOCK FLANGE

2 5025392 6 NUT, 5/16-18 HEX NYLOCK FLANGE

3 5025155 7 WASHER, 5/16” SAE

4 5047582B 1 BRACE, TRANSAXLE

5 5025059X6 2 BOLT, 5/16-18 X 3/4”, SELF-TAPPING

6 5025011X8 3 BOLT, 5/16-18 X 1” GD5 YZ

7 5048312B 1 SKID PLATE

8 5022967 1 HYDRO RETURN SPRING

9 5025011X24 4 BOLT, 5/16-18 X 3” GD5 YZ 10 5022905 1 TRANSAXLE, HYDROSTATIC 11 5023058 1 BELT,# 46-4631 12 5020807 1 SPRING, EXTENSION 13 5025100 2 NUT, 3/8-16 HEX SIDE LOCK 14 5025013X24 1 BOLT, 3/8-16 X 3” GD5 YZ 15 5025165 1 WASHER, 3/8” FENDER 16 5047716 1 SPACER, .41 X .75 X 2.06 17 5020876B 2 BUSHING, BRASS, 3/4 X 1 X 1 18 5047717B 1 PIVOT ARM, WELDMENT 19 5043627 1 PULLEY, IDLER ASSEMBLY 20 5025156 1 WASHER, 3/8” SAE 21 5025013X16 1 BOLT, 3/8-16 X 2” GD5 YZ 22 5047914 1 PULLEY, DRIVE, 4.50 OD X 1.000 ID

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

21

TP 400-7336-B-HC-SN

Transaxle - SERVICE PARTS

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

22

TP 400-7336-B-HC-SN

Transaxle - SERVICE PARTS

PART NO. DESCRIPTIONREF NO. QTY.

2 5022905X24 1 ASSEMBLY, SIDE HOUSING

6 5022905X1 10.5 SEALANT

9 5022905X2 1 SHAFT, INPUT 10 5022905X3 1 RING - RETAINING 11 5022905X4 1 SPACER 12 5022905X5 3 RING - RETAINING 13 5022905X16 1 SEAL, Lip, .67 x 1.58 x .276 14 5022905X6 1 BALL BEARING 17 5022905X18 1 SEAL, LIP, 18 X 32 X 7 32 5022905X7 2 OUTBOARD SLEEVE BEARING 34 5022905X17 2 LIP SEAL, Axle Seal 35 5022905X8 1 AXLE SHAFT - RH 36 5022905X9 1 AXLE SHAFT - LH 51 5022905X19 1 SEAL, LIP, .741 X .250 X .250 TC 55 5022905X10 1 SPRING - HELICAL COMPRESSION 56 5022905X11 1 WASHER 57 5022905X12 78.8 20W-50 OIL 67 5022905X22 1 BOLT, SQ. HD. 5/16-24 RIBBED 74 5022905X20 1 KIT, SEAL

101 5022967 1 HYDRO RETURN SPRING 103 5022905X21 1 BRACKET, TORQUE 119 5022905X13 1 FAN, 6”, 10 BLADE 128 5022905X14 1 EXPANSION TANK KIT 130 5022905X15 1 FAN/PULLEY KIT (Includes Ref. No. 119)

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

23

TP 400-7336-B-HC-SN

Tire & Wheel Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

24

TP 400-7336-B-HC-SN

Tire & Wheel Group

PART NO. DESCRIPTIONREF NO. QTY.

1 5048409 2 KEY, 3/16 SQ. X 2-1/2

2 5048417 2 DRIVE HUB (Includes Ref No. 8)

3 5023104 2 WHEEL & TIRE ASSEMBLY, 16 x 6.5 x 8, Complete (Includes Ref No. 4 & 5)

4 5023104X2 2 TIRE, 16. x 6.5 x 8

5 5023104X1 2 WHEEL ASSEMBLY, 8 x 5.38

6 5025520X3 8 SHIM

7 5020863 2 C-CLIP

8 5020601 8 LUG NUT, 1/2-20

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

25

TP 400-7336-B-HC-SN

Decals - Safety & Instruction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

26

TP 400-7336-B-HC-SN

Decals - Safety & Instruction

PART NO. DESCRIPTIONREF NO. QTY.

1 5100507 1 DECAL, CONTROL PLANEL, HC

2 5049318 1 DECAL, HEIGHT OF CUT

3 5047778 1 DECAL, DECK HEIGHT ADJUST

4 1720389 3 DECAL, DANGER, ROTATING BLADES

5 5049320 1 DECAL, HYDRO RELEASE

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

27

TP 400-7336-B-HC-SN

Decals - Brand & Model

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

28

TP 400-7336-B-HC-SN

Decals - Brand & Model

PART NO. DESCRIPTIONREF NO. QTY.

1 1722551 2 DECAL, SIMPLICITY LOGO GV3079178

2 7100246 2 DECAL, SNAPPER PRO

3 5075563 1 DECAL, 32” SILVER COMMERCIAL (Not Shown)

4 5022560 2 DECAL, FERRIS TEXT & LOGO

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

29

TP 400-7336-B-HC-SN

32" Mower Deck - Frame, Casters, & Shield Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

30

TP 400-7336-B-HC-SN

32" Mower Deck - Frame, Casters, & Shield Group

PART NO. DESCRIPTIONREF NO. QTY.

1 5048145B 1 SHIELD INSERT

2 5025299X4 4 SCREW, Allen Head, 1/4-20 x 1/2

3 5048150 1 GUARD, MOWER HOUSING

4 5048353B 2 SHIELD MOUNT BRACKET

5 5022308 4 BODY CLIP, 5/16-18

6 5025169 4 WASHER, 1/4” Lock

7 5025010X6 4 BOLT, 1/4-20 x 3/4

8 5025013X8 8 BOLT, 3/8-16 x 1

9 5025128 8 NUT, 3/8-16 Hex Serrated Flange 10 5025013X20 4 BOLT, 3/8-16 x 2-1/2 11 5025156 4 WASHER, 3/8” SAE 12 5022319 4 KNOB 13 5047648B 1 FRAME RAIL - LH 14 5022098 2 CAP, Plastic 15 5048194B 1 CROSS TUBE 16 5048969 1 CASTER MOUNT FRAME, Complete (Includes Ref No. 17 & 28) 17 5020095 2 GREASE FITTING 18 5025017X44 2 BOLT, 1/2-13 x 5-1/2 19 5041657 2 AXLE, Caster Wheel 20 5021181S 2 WHEEL & TIRE ASSEMBLY, Silver, 9 x 3.5 x 4, Complete (Includes Ref No. 21 -

25) 21 5021181X1 2 TIRE, Front, 9 x 3.5 x 4 22 5021181X2 2 TUBE 23 5021181SX3 2 HUB & BEARING ASSEMBLY, Complete, Silver (Includes Ref No. 24 & 25) 24 5021182 2 BEARING, Roller (1 per tire) 25 5021043 4 RETAINER, Bearing (2 per tire) 26 5025056 2 NUT, 1/2-13 Hex Nylon Lock 27 5048172B 2 CASTER YOKE (Use with Ref No. 16, part no. 48969) 28 5020823 4 BUSHING, Flange 29 5025096 4 NUT, 3/8-16 Hex Nylon Lock 30 5010114 2 COLLAR, 3/4” Split 31 5047649B 1 FRAME RAIL - RH 32 5048968 1 CASTER MOUNT FRAME W/ LOCKS, Complete (Includes Ref No. 17 & 28) 33 5048965B 2 CASTER YOKE (Use with Ref No. 32, part no. 48968) 34 5023274 2 CAP,VINYL, 1.375 X 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

31

TP 400-7336-B-HC-SN

32" Mower Deck - Height Adjustment Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

32

TP 400-7336-B-HC-SN

32" Mower Deck - Height Adjustment Group

PART NO. DESCRIPTIONREF NO. QTY.

1 5025162 4 WASHER, 1” SAE 2 5047682B 1 DECK LIFT PIVOT - REAR 3 5025356 8 SHOULDER BOLT, 1/2 x 3/8 4 5047655 1 HEIGHT ADJUST ROD 5 5048526 1 LINKAGE ADJUSTER 6 5025100 1 NUT, 3/8-16 Hex Side Lock 7 5025201X6 1 COTTER PIN, 3/32” x 3/4” 8 5025046 8 NUT, 3/8-16 Hex Top Lock

9 5010546 1 COLLAR, 3/8” Set 10 5025156 6 WASHER, 3/8” SAE 11 5022645 1 SPRING, Compression 12 5047710B 4 DECK ADJUST LINK 13 5025011X8 4 BOLT, 5/16-18 x 1 14 5025139 4 NUT, 5/16-18 Hex Large Serrated Flange 15 5025013X10 2 BOLT, 3/8-16 x 1-1/4 16 5044933 2 SPACER, .39 x .75 x .38 17 5048549 2 COLLAR, Double Split, 1” 18 5025128 7 NUT, 3/8-16 Hex Serrated Flange 19 5047737 1 CUT HEIGHT INDICATOR 20 5025034 1 NUT, 3/8-16 Hex 21 5047681B 1 DECK LIFT PIVOT - FRONT 22 5025013X6 4 BOLT, 3/8-16 x 3/4 23 5048439B 2 HANGER PLATE 24 5020095 1 GREASE FITTING 25 5048548 1 WASHER, 3/8” NYLON HYDRO CUT

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

33

TP 400-7336-B-HC-SN

32" Mower Deck - Housing, Spindles, Blades, & Pulleys Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

34

TP 400-7336-B-HC-SN

32" Mower Deck - Housing, Spindles, Blades, & Pulleys Group

PART NO. DESCRIPTIONREF NO. QTY.

1 5022918 1 BELT

2 5050407X1 2 KEY, 1/4 SQ. X 1

3 5047638 2 SPINDLE PULLEY

4 5041476 8 SPACER, 1.02 X 1.56 X .50

5 5025013X8 1 BOLT, 3/8-16 x 1

6 5047777B 1 BELT GUIDE

7 5025126 1 NUT, 1/4-20 Hex Serrated Flange

8 5025392 10 NUT, 5/16-18 Hex Nylock Flange

9 5061096 2 SPINDLE ASSEMBLY, Complete (Includes Ref No. 10 - 18) 10 5023329 2 GREASE FITTING 11 5025405 2 NUT, 3/4-16 Hex 12 5025406 2 WASHER, 3/4” Belleville 13 5049793 4 TRASH SHIELD 14 5023330 4 BEARING 15 5023296 2 RELIEF VALVE 16 5061097 2 SPINDLE HOUSING 17 5061099 2 SPACER, 1.00 x 1.25 x 1.75 18 5061100 2 SPINDLE SHAFT 19 5023156 8 BOLT, Flange Head, 5/16-18 x 1-1/4 20 5020843 2 MOWER BLADE, 16-1/4” 21 5025159 2 WASHER, 5/8” USS 22 5025320X14 2 BOLT, 5/8-11 x 1-3/4 23 5047576B 1 WELD, MOWER DECK, 32” - RED (Includes safety decals) 24 5045914 1 ROD, CHUTE PIVOT 25 5047724B 1 WELD, DISCHARGE CHUTE 26 1723938 2 SPRING, TORSION 27 5045638 1 SPACER, TORSION SPRING-SHORT

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

35

TP 400-7336-B-HC-SN

Electrical Group - Electric Start

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

36

TP 400-7336-B-HC-SN

Electrical Group - Electric Start

PART NO. DESCRIPTIONREF NO. QTY.

1 5021542 1 POSITIVE (+) BATTERY CABLE, 30” (See Motion Control, Parking Brake &

Operator Presence Group - Electric Start) 2 5022180 1 SWITCH, PTO 3 5020927 1 SWITCH, Ignition, Complete (Includes Ref No. 4 - 6) 4 5022789 1 KEY, Ignition, Molded Set 5 5022790 1 COVER 6 5022791 1 PLASTIC NUT 7 5061470 1 WIRE HARNESS 8 5022438 1 SWITCH, Plunger, NO/NO 9 5021769 3 SWITCH, Plunger, NC

10 5021405 1 POSITIVE (+) BATTERY CABLE, 22” 11 5025126 4 NUT, 1/4-20 Hex Serrated Flange 12 5025010X6 4 BOLT, 1/4-20 x 3/4 13 5021406 1 NEGATIVE (-) BATTERY CABLE, 22” 14 - 1 BATTERY, Lawn & Garden, 12V (BCIU1, 340 CCA) 15 5023216 2 NUT, Hex Jam, 5/16-24 16 5023217 2 WASHER, Light Lock, 5/16 17 1724815 1 SOLENOID

Footnotes

The above parts group applies to the following Mfg. Nos.:

5901182 (HC32KAV13E) 32" 13 HP Hydro

2008

37

TP 400-7336-B-HC-SN

Hardware Identification & Torque Specifications

Common Hardware Types

Hex Head Capscrew

Carriage Bolt

Standard Hardware Sizing

When a washer or nut is identified as 1/2”, this is the

Nominal size

second number is present it represent the

When bolt or capscrew is identified as 1/2 - 16 x 2”, this means the second number represents the example, and the final number is the bolt or screw (in this example 2 inches long).

, meaning the

Nominal size

inside diameter

, or

body diameter

threads per inch

body length

Washer

Lockwasher

Hex Nut

is 1/2 inch; if a

threads per inch

is 1/2 inch; the

(16 in this

of the

The guides and ruler furnished below are designed to help you select the appropriate hardware and tools.

0

1/4 3/4

1/2

Nut, 1/2”

Inside Diameter

1

1/4 3/4

1/2

Screw, 1/2 x 2

2

1/4 3/4

1/2

3

1/4 3/4

1/2

4

Body

Diameter

Body

Length

Torque Specification Chart

FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)

Hardware Grade

Size Of Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.

8-32 8-36 10-24 10-32 1/4-20 1/4-28 5/16-18 11 15.0 17 23.1 25 34.0 5/16-24 12 16.3 19 25.8 27 34.0 3/8-16 20 27.2 30 40.8 45 61.2 3/8-24 23 31.3 35 47.6 50 68.0 7/16-14 30 40.8 50 68.0 70 95.2 7/16-20 35 47.6 55 74.8 80 108.8 1/2-13 50 68.0 75 102.0 110 149.6 1/2-20 55 74.8 90 122.4 120 163.2 9/16-12 65 88.4 110 149.6 150 204.0 9/16-18 75 102.0 120 163.2 170 231.2 5/8-11 90 122.4 150 204.0 220 299.2 5/8-18 100 136 180 244.8 240 326.4 3/4-10 160 217.6 260 353.6 386 525.0 3/4-16 180 244.8 300 408.0 7/8-9 140 190.4 400 544.0 600 816.0 7/8-14 155 210.8 440 598.4 660 897.6 1-8 220 299.2 580 788.8 900 1,244.0 1-12 240 326.4 640 870.4 1,000 1,360.0

1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews.

2. Recommended seating torque values for locknuts:

a. for prevailing torque locknuts - use 65% of grade 5

torques.

b. for flange whizlock nuts and screws - use 135% of

grade 5 torques.

3. Unless otherwise noted on assembly drawings, all torque values must meet this specification.

No

Marks

SAE Grade 2 SAE Grade 5 SAE Grade 8

in/lbs in/lbs

19 20 27 31 66 76

2.1

2.3

3.1

3.5

7.6 8 10.9 12 16.3

8.6 10 13.6 14 19.0

30 31 43 49

NOTES

3.4

3.5

4.9

5.5

in/lbs

41 43 60 68

420 571.2

4.6

4.9

6.8

7.7

Wrench & Fastener Size Guide

1/4

1/4” Bolt or Nut

Wrench—7/16”

5/16

5/16” Bolt or Nut

Wrench—1/2”

3/8

3/8” Bolt or Nut

Wrench—9/16”

7/16 DIA.

7/16” Bolt or Nut

Wrench (Bolt)—5/8”

Wrench (Nut)—11/16”

1/2

DIA.

1/2” Bolt or Nut

Wrench—3/4”

Parts Manual

Hydrocut Export

Walk-Behind Mower

S/N: 2000856282 & Above

IT IS THE POLICY OF FERRIS INDUSTRIES TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED

Briggs and Stratton Power Products Group, LLC

5375 North Main Street Munnsville, NY 13409 USA 800-933-6175

www.ferrisindustries.com

2008

Snapper 5901182 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual