Snapper 4579 User Manual

Parts Manual

Prestige

Series Garden Tractors & Mower Decks

27HP Product

. No. Description

1695264 Prestige, 27HP Hydro 4WD w/PS RMO 2690680 Prestige, 27HP Hydro 4WD w/PS RMO and 50" Mower Deck 2690681 Prestige, 27HP Hydro 4WD w/PS RMO and 54" Mower Deck

Mower Decks

Mfg. No. Description

1695294 50" Mower Deck 1695266 54" Mower Deck

Rev.

1734885 04/2007

Part No.:

TP 400-4579-00-PR-S

Table Of Content

PRODUCT COMPONENTS PAGES

Frame & Front Axle Group - 4WD .......................................................................................................................

Steering Group - Power Steering .........................................................................................................................

Engine & Electric Clutch Group - 23HP, 25HP & 27HP Kohler ...........................................................................

Transmission Group .............................................................................................................................................

Controls Group .....................................................................................................................................................

Cruise Control Group ...........................................................................................................................................

Electrical Group ....................................................................................................................................................

Hood, Grille & Dash Group ..................................................................................................................................

Seat & Seat Deck Group ......................................................................................................................................

Lift Group - Hydraulic Lift with Power Steering ....................................................................................................

Wheels & Tires Group ..........................................................................................................................................

Decals Group .......................................................................................................................................................

44" & 50" Mower Deck - Clutch & Support Group ...............................................................................................

50" Mower Deck - Electric Height Adjustment & Roller Bar Group .....................................................................

50" Mower Deck - Housing, Arbors & Blades ......................................................................................................

54" Mower Deck - Clutch & Support Group .........................................................................................................

54" Mower Deck - Electric Height Adjust & Roller Group ....................................................................................

54" Mower Deck - Housing, Arbor & Cover Group ..............................................................................................

10 12 16 18 20 22 24 26 30 32 34 36 40 44 46 50

Torque Specification Chart ..................................................................... Inside Back Cover

4 8

Frame & Front Axle Group - 4WD

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987590

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Frame & Front Axle Group - 4WD

PART NO. DESCRIPTIONREF NO QTY.

FRAME ASSEMBLY, Front & Rear 4WD 1 1734731ASM 1 TOWER & SUPPORT ASSEMBLY 2 1733139ASM 1 SUPPORT, Seat Deck 3 1723528ASM 1 BACKPLATE, Hitch 4 1722602ASM 1 BRACKET ASSEMBLY, Steering 4WD 5 1733918ASM 1 BUMPER, 4GA 6 1721805ASM 1 AXLE ASSEMBLY, Front 7 1733480SM 1 PIVOT ASSEMBLY, Axle w/Bushings 8 1734241ASM 1 CAPSCREW, Hex Head, 5/8-11 x 2-1/2 G5 9 1960755SM 1 CARRIAGE BOLT, 3/9-16 x 3/4 G5 12 1931348SM 2 JOINT, Ball 1/2-20 13 1702779SM 1 SPACER 14 1708236SM 1 NUT, Hex Jam, 1/2-20 15 1919262SM 1 NUT, Hex Flange, 3/8-16 Two-Way Lock 16 1930645SM 1 BRACKET, Cylinder Mounting 18 1733166ASM 1 SPACER 20 2172914SM 1 CYLINDER, Hydraulic Steering 21 1733759SM 1 CAPSCREW, Hex Head, M12-1-3/4 x 35 22 197487SM 3 SHAFT & BRACKET ASSEMBLY, Axle Pivot 23 1733863SM 1 WASHER, 5/8 24 1960035SM 2 STOP, "L" Steering 25 1734511ASM 1 SCREW, Hex Washer Head Taptite, 5/16-18 x 3/4 26 1664847SM 4 NUT, Hex Flange 5/8-11 Two-Way Lock 27 2860646SM 2 SCREW, Hex Washer head, Taptite, 3/8-16 x 3/4 28 1923683SM 4 NUT, Hex Flange 1/2-13 Whiz Lock 29 2860668SM 2 NUT, Hex Flange 3/8-16 Whiz Lock 30 1928352SM 4 CAPSCREW, Hex Head 1/2-13 x 1 G5 31 1923114SM 2 CAPSCREW, Hex Head 3/8-16 x 1 G5 32 1921210SM 2 SCREW, Truss Head Torx Drive 5/16-18 x 7/8 33 1960086SM 4 PIN, Dowel 34 1733581SM 2 WASHER, 1/2 35 1960170SM 3 LOCKWASHER, Spring 36 1916966SM 3 PIN, Cotter 37 1923360SM 1 LOCKWASHER, Spring 38 1960754SM 6 CAPSCREW, Hex Head 39 1950036SM 6 SPACER, Powdered Metal 40 1667812SM 1 FITTING, Hose Elbow, 45 Degrees, 13/16-16 x 3/4-16 41 1733403SM 2 HOSE ASSEMBLY, Hydraulic 42 1733400SM 1 HOSE ASSEMBLY, Hydraulic 43 1733891SM 1 BRACKET, Hose Mounting 10GA 44 1733501ASM 1 FITTING, Bulkhead Union 13/16-16 45 1733402SM 2 CARRIAGE BOLT, 5/16-18 x 3/4 G5 46 1931333SM 2 NUT, Hex KEPS, 5/16-18 47 1960636SM 2 NUT, Jam 13/16-16 48 1733947SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Frame & Front Axle Group - 4WD

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987590

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Frame & Front Axle Group - 4WD

PART NO. DESCRIPTIONREF NO QTY.

WASHER, 3/8 49 1960103SM 1 CARRIAGE BOLT, 3/8-16 x 2-1/4 G5 50 1931355SM 1 SUPPORT, Steering Unit 7GA 51 1733044ASM 1 SCREW, Hex Washer Head Taptite 5/16-18 x 1/2 52 1924856SM 4

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Steering Group - Power Steering

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987424

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Steering Group - Power Steering

PART NO. DESCRIPTIONREF NO QTY.

STEERING WHEEL 1 1733363SM 1 PLATE, Steering Mounting 4 1724685ASM 1 CARRIAGE BOLT, 5/16-18 x 1-1/4 G5 5 1960655SM 2 ADAPTER, Tilt 6 1725294SM 1 SPACER 7 1723898SM 2 NUT, Push Pal 8 1933988SM 2 NUT, Hex Keps 5/16-18 9 1960636SM 2 STEERING UNIT, Tilt 10 1733790SM 1 BELLOWS, Tilt Steering Unit w/Slot 11 1686970SM 1 CAP, Steering Wheel 12 1725024SM 1 DECAL, Power Steering (Not Shown) 13 1716518SM 2 WASHER, 5/8 14 1924366SM 1 NUT, Hex Lock ESNA Light 5/8-18 15 1960576SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Engine & Electric Clutch Group - 23HP, 25HP & 27HP Kohler

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

985906

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Engine & Electric Clutch Group - 23HP, 25HP & 27HP Kohler

PART NO. DESCRIPTIONREF NO QTY.

ENGINE, 23HP Kohler Command - Model CV23S Spec PS-75553 1* 1 ENGINE, 25HP Kohler Courage Twin - Model SV730S Spec PS-SV730-0020 1* 1 ENGINE, 25HP Kohler Command Twin - Model CV730S 1* 1 ENGINE, 27HP Kohler Command Twin - Model CV740S Spec PS-CV740-0040 1* 1 SEAL, Foam (Only used on 23HP Models) 2 1719847SM 1 HOSE, Oil Drain 3 1723165SM 1 BULKHEAD 4 1722388ASM 1 SCREW, Hex Washer Head Taptite 5/16-18 x 1/2 5 1924856SM 2

6 1727223SM 1

21 2827187SM 3/4

CONTROL, Throttle Double 39.0 LG w/Knobs (Used on all models except 25HP Kohler Courage)

THROTTLE, Control Double 51.0 LG w/Knobs (Only used on 25HP Kohler Courage) 6 1727375SM 1 CLAMP, Hose 7 2860112SM 1 HOSE, Fuel 8 1718678SM 1 TIE, Self Locking 9 1701011SM 3 SHIELD, Side 10 1722392ASM 2 MUFFLER, Kohler Twin 11 1721705SM 1 DUCT, Muffler (Used on all models except 25HP Kohler Courage) 12 1722390ASM 1 DUCT, Muffler (Only used on 25HP Kohler Courage) 12 1733884ASM 1 SCREW, Hex Whiz Lock Flange 1/4-20 x 5/8 13 1960295SM 4 CLIP, Speed Wire 14 2834683SM 2 DUCT, Muffler Top 15 1722389ASM 1 SCREW, Hex Washer Head Taptite 1/4-20 x 3/8 16 1929000SM 8 SHIELD, Muffler 17 1722414ASM 1 NUT, Speed 1/4-20 Lug Type 18 1960368SM 4/8 NUT, Speed 5/16-18 Lug Type 19 1935255SM 2 LOCKWASHER, External Tooth 3/8 20 2820427SM 1 SCREW, Hex Washer Head Taptite 3/8-16 x 1 (Used only on 25HP Courage & 27HP

Command) SCREW, Hex Washer Head Taptite 3/8-16 x 1-1/2 (Used on all models except 27HP) 22 2830598SM 1/4 KEY, Hi-Pro 23 1720463SM 1 PULLEY & HUB ASMY 24 1722288SM 1 WASHER, Hex 25 1708264SM 1 LOCKWASHER, Spring 26 1918199SM 1 CAPSCREW, Hex Head 7/16-20 x 3-1/2 G5 27 1960649SM 1 CLUTCH, Electric 28 1686883SM 1 TIE, Self Locking (Used only on 23HP models) 29 2832747SM 1 SCREW, Hex Washer Head Taptite 1/4-20 x 1/2 30 1925003SM 2 WASHER, 3/8 (Used on all models except 23HP) 31 1924940SM 1 RETAINER, Clutch (Used on all models except 23HP) 32 1732026SM 1 EDGING, Rubber (Used on all models except 23HP) 33 1731971SM 1

Footnotes

Note * See your local Kohler distributor for parts and service.

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Transmission Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987547

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Transmission Group

PART NO. DESCRIPTIONREF NO QTY.

TRANSMISSION ASSEMBLY, K664 1 1733478SM 1 PULLEY & HUB ASSEMBLY 2 1722194SM 1 FAN 3 1719233SM 1 SCREW, Hex Washer Head, Taptite, 1/4-20 x 1-1/4 4 1933958SM 3 BELT, 94.05 5 1721392SM 1 STRAP, 4-1/4 Long 6 1721593ASM 1 ARM, Control 7GA 7 1733318ASM 1 ROD, 17-27/64 Long 8 1721424SM 1 SPRING, Compression 9 1722684SM 1 SPRING, Compression 10 1729277SM 1 CAP, Expansion 11 1722711SM 1 SCREW, Pan Head Torx, 1/4-20 x 1-1/4 Taptite 12 1960676SM 2 FASTENER, Panel 13 1704351SM 15 PAD, Footrest L.H. 14 1722174SM 1 PAD, Footrest R.H. 15 1722173SM 1 ROD, Free Wheel 16 1721622SM 1 KNOB, Interior Thread 17 1723126SM 1 SUPPORT, Transmission 18 1721728ASM 2 HOSE, Hydraulic 19 1733531SM 1 BOLT, Shoulder, 3/8-16 21 1732129SM 3 CLIP, Hair Pin 22 1960074SM 1 SPACER 23 1734337SM 1 CLAMP, Hose Worm 24 2860266SM 1 WASHER, 1/2 25 1960027SM 3 WASHER, 3/8 26 1924940SM 1 PIN, Quick 27 1722460SM 1 TANK, Oil Natural 28 1732989SM 1 CLAMP, Hose Worm 29 1723214SM 2 NUT, Hex Flange 5/16-18 ESNA 30 1960686SM 6 COTTER PIN 31 1918447SM 1 CAPSCREW, Hex Head 5/16-18 x 2-1/2 G5 32 1921719SM 1 WASHER, 5/16 33 1960141SM 1 CARRIAGE BOLT, 5/16-18 x 1 G5 34 1931335SM 1 NUT, Hex KEPS 5/16-18 35 1960636SM 2 NUT, Hex Flange 36 1719968SM 1 NUT, Hex Flange 3/8-16 ESNA 42 1960687SM 4 WASHER, 7/16 43 1918267SM 1 CARRIAGE BOLT, 3/8-16 x 1 G5 44 1931350SM 6 CAPSCREW, Hex Head 5/16-18 x 3 G5 45 1960590SM 4 WASHER, 5/16 46 1919326SM 3 NUT, Hex Keps 3/8-16 47 1960637SM 6 ACTUATOR, Switch 48 1727215ASM 1 POP RIVET 49 1960241SM 2 PIN, Clevis 50 1724107SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Transmission Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987547

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Transmission Group

PART NO. DESCRIPTIONREF NO QTY.

BEARING 51 1722648SM 1 HOSE, Hydraulic 52 1722468SM 1 CAPSCREW, Hex Head, 5/16-18 x 2-1/4 G5 53 1921160SM 1 SPACER 54 1713588SM 1 PIVOT ASSEMBLY, Control 55 1733320ASM 1 ARM, Control 56 1733525ASM 1 TUBE, Hydraulic 4WD 57 1733483SM 1 TUBE, Hydraulic Rear 58 1733484SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Controls Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

986599

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Controls Group

PART NO. DESCRIPTIONREF NO QTY.

ROD, Brake Lock 1 1721353SM 1 KNOB, Push On, Red Plastic "P" 2 1721891SM 1 CAPSCREW, Hex Flange Whiz Lock, 5/16-18 x 3/4 3 1930591SM 1 WASHER, 5/16, Black 4 1919326SM 2 ROD, Brake 5 1721476SM 1 CARRIAGE BOLT, 3/8-16 x 1 3/4 6 1931353SM 2 BUSHING, 5/8 x 3/4 x 3/4, Nylon 7 1663114SM 2 FITTING, Lube, 1/4 8 2821133SM 1 SPRING, Extension 9 1725250SM 1 PIN, Quick 10 1722460SM 3 ARM & HUB ASSEMBLY, Idler 11 1724917SM 1 WASHER, 5/8 12 1960020SM 1 RING, Clipring Extension 13 1704420SM 1 PULLEY, w/Bearing 14 1721134SM 1 WASHER, 3/8 15 1924940SM 1 NUT, Hex Flange ESNA, 3/8-16 16 1960687SM 2 PULLEY, Idler 17 1721133SM 1 BUSHING, 1 x 1-1/8 x 5/8, Nylon 18 1723237SM 2 ARM, Brake 19 1722513SM 1 PEDAL ASSEMBLY, Foot 20 1726763SM 1 CARRIAGE BOLT, 1/4-20 x 1-1/4 21 1931320SM 1 PIN, Cotter, Black 22 1918447SM 1 LATCH, Brake 23 1721354ASM 1 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 3/4 24 1664847SM 3 NUT, Hex Lock ESNA Light, 5/16-18 25 1919438SM 1 WASHER, 5/16, Black 26 1919381SM 1 NUT, Hex Flange Whiz Lock Large, 5/16-18 27 1927557SM 2 PEDAL, Brake 28 1722535ASM 1 PAD, Brake Pedal 29 1721577SM 1 CARRIAGE BOLT, 5/16-18 x 7/8 30 1931334SM 4 CAPSCREW, 5/16-18 x 1 31 1921333SM 2 ACTUATOR, Switch 2.53" Long 32 1722083ASM 1 CAPSCREW, Hex Washer Head Taptite, 3/8-16 x 3/4 33 1923683SM 1 PEDAL, Forward 34 1722070ASM 1 NUT, Hex KEPS, 5/16-18 35 1960636SM 4 PAD, Foot Pedal Forward 36 1721675SM 1 PEDAL, Reverse 37 1722071ASM 1 PAD, Foot Pedal Reverse 38 1721674SM 1 NUT, Hex Lock ESNA Light, 1/4-20 39 1920397SM 1 CAM, Roller 40 1686612SM 1 SPRING, Extension 41 1721995SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Cruise Control Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

985883

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Cruise Control Group

PART NO. DESCRIPTIONREF NO QTY.

COVER, w/Cruise Icon 1 1722314SM 1 SCREW, Torque Head Plus Socket Head, 1/4-20 x 7/8 2 1960666SM 1 KNOB, Cruise 3 1722303SM 1 NUT, Hex Lock ESNA Light, 1/4-20 4 1920397SM 1 LEVER & BRACKET ASSEMBLY, Cruise 5 1722003SM 1 WASHER, 3/8, Black 6 1960103SM 2 CARRIAGE BOLT, 5/16-18 x 3/4 7 1931333SM 1 WASHER, 1/2 8 1924361SM 2 SPACER, w/Flange, 11/32 x 15/32 x 3/4 9 1709043SM 1 CARRIAGE BOLT, 5/16-18 x 2-3/4 10 1931342SM 1 CARRIAGE BOLT, 5/16-18 x 2-1/4 11 1960273SM 1 PIN, Quick 12 1722460SM 2 ROD, Cruise 13 1722117SM 1 ROD, Return 14 1733719SM 1 SPRING, Cruise Return to Frame 15 2159106SM 1 NUT, Hex KEPS, 5/16-18 16 1960636SM 2 CAPSCREW, Hex Washer Head Plastite, 10-14 x 5/8 17 1960001SM 2 SWITCH, Push, Neutral Start, Gray 18 1717050SM 1 SPACER, 11/32 x 5/8 x 1-13/32 19 1722080SM 1 WASHER, 5/16, Black 20 1919326SM 1 WASHER, 5/16, Black 21 1919381SM 1 NUT, Hex Lock ESNA Light, 5/16-18 22 1919438SM 1 SPRING, Compression 23 1677746SM 1 PIN, Cotter 24 1918447SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Electrical Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

986606

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Electrical Group

PART NO. DESCRIPTIONREF NO QTY.

HEADLIGHT ASSEMBLY, 4 Bulb (Includes Ref. Nos. 2 & 3) 1 1721810SM 1 BULB, Headlight, 12.8V 2 1677371SM 4 SOCKET ASSEMBLY, Headlight, Sealed 3 1723451SM 4 HARNESS, Headlight 4 1722669SM 1 SWITCH, PTO Push 5 1722887SM 1 SWITCH, Reverse Mow Option Module w/Key 6 1726556SM 1 KEY, No Mow Module 7 1726557SM 1 SCREW, Hex Washer Head Taptite 1/4-20 x 1/2 8 1925003SM 2 BREAKER, Circuit 9 1665238SM 1 SWITCH, Electric Lift Rocky (Used only on Electric HOC Models) 10 1716329SM 1 PLUG, Hole 11 1722611SM 1 PANEL, Instrument w/Fuel Gage 12 1725074SM 1 SWITCH ASSEMBLY, Ignition 13 1686734SM 1 KEY, Ignition 14 1717163SM 1 COVER, Switch 15 1717550SM 1 NUT, Hex Flange 5/8-32 Ignition Switch Die Cast 16 1717549SM 1 LOCKWASHER, Interal Tooth 5/8 17 1960547SM 1 WASHER, 5/8 18 2101025SM 1 TIE, Self Locking 19 1701011SM 5 SWITCH, Headlight 20 1716951SM 1 COVER, Terminal Red 21 1724588SM 1 NUT, Hex Flange 22 2860433SM 1 INSULATOR, Battery 23 1713534SM 1 CABLE 24 1716333SM 1 BATTERY, 12 Volt, 6 Cell, 500 Amps CCA 25 1686714SM 1 STRAP 26 1722009SM 1 CABLE 27 1717001SM 1 SCREW, Hex Washer Head Taptite, 1/4-20 x 3/8 28 1929000SM 1 BRACKET, Switch Mounting 29 1726810ASM 1 SWITCH, Push Button, Reverse Pedal 30 1732004SM 1 SWITCH, Push Button, Foot Pedal 31 1732006SM 1 SWITCH, Cruise Control 32 1717050SM 1 SCREW, SEMS PAN HD TORX #10-32X0.500YEL 33 2860665SM 5 SENDER, Fuel Tank 34 1686921SM 1 PLUG, Hole 35 1722309SM 1 GASKET 36 1685303SM 1 POWER OUTLET, 12 Volt 37 1725302SM 1 SWITCH, Operator Present, Seat 38 1718981SM 1 HARNESS, Wiring w/12 Volt 39 1730192SM 1 HARNESS, Wiring w/12 Volt & Electric HOC 39 1733220SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Hood, Grille & Dash Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

986608

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Hood, Grille & Dash Group

PART NO. DESCRIPTIONREF NO QTY.

PANEL, RH Side 1 1721804CSM 1 PANEL, RH Side, Red 1 1721804DSM 1 HOOD, with Scoop, Red 2 1728031DSM 1 HOOD, with Louvers 3 1722110CSM 1 CAPSCREW, Hex Head Flange Lock,1/4-20 x 5/8 4 1960295SM 12 SCREW, Phillips Head, #10-24 x 1/2 5 1960392SM 1 DASHBOARD, RMO, Black 6 1687054SM 1 DASHBOARD, RMO with Hydra Lift Slot, Black 6 1687055SM 1 NUT, Hex Nylock,#10-24 7 1933896SM 1 ROD, Dash Support 8 1723123SM 1 NUT, Hex Flange Lock, 1/4-20 9 1930641SM 12 PANEL, LH Side 10 1721803CSM 1 PANEL, LH Side, Red 10 1721803DSM 1 HINGE, LH 11 1721808ASM 1 DUCT, Air Inlet 12 1733457ASM 1 GRILLE 13 1721802CSM 1 GRILLE, Red 13 1721802DSM 1 HEADLIGHT ASSEMBLY, (Includes Ref. Nos. 15 & 16) 14 1721810SM 1 BULB, Headligh 15 1677371SM 4 SOCKET, Headlight 16 1723451SM 4 HINGE, RH 17 1721809ASM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Seat & Seat Deck Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

985909

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Seat & Seat Deck Group

PART NO. DESCRIPTIONREF NO QTY.

BRACKET, 1-5/8 x 1-3/4 1 1722129ASM 1 SEAT, 18" Back 2 1687199SM 1 SUPPORT, Seat 3 1722128ASM 1 CLIP, Wire 4 2172434SM 1 WASHER, Spring, 5/16 x 1-1/4 5 1709256SM 2 SPRING, Compression 6 1714263SM 2 NUT, Hex Lock, ESNA Light, 5/16-18 7 1919438SM 10 SPRING, Compression 8 1717051SM 2 CAPSCREW, Hex Flange Whiz Lock, 5/16-18 x 3/4 9 1930591SM 8 CARRIAGE BOLT, 5/16-18 x 2 10 1931339SM 2 CARRIAGE BOLT, 3/8-16 x 1 11 1931350SM 2 SLIDE, Seat 12 1722356SM 1 NUT, Speed, 5/16-18, Lug Type 13 1935255SM 4 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 5/8 14 1930601SM 4 PLUG, Plastic 15 1722309SM 2 POD, with Cup Holder, LH 16 1729711SM 1 CAPSCREW, Hex Washer Head, 1/4-20 x 5/8 17 2860664SM 8 NUT, Hex Flange Whiz Lock, 5/16-18 18 1931277SM 4 CAP, Gas 19 1715917SM 1 TUBE & ELBOW ASSEMBLY 20 1722340SM 1 BUSHING, 3/8 x 9/16 x 5/8, Rubber 21 1654930SM 1 TANK, Fuel 22 1722432SM 1 NUT, Hex KEPS, 5/16-18 23 1960636SM 8 DECK, Seat, Orange 24 1722106CSM 1 DECK, Seat, Red 24 1722106DSM 1 POD, RH with 2 Slots 25 1722108SM 1 TUNNEL, Orange 26 1722105CSM 1 TUNNEL, Red 26 1722105DSM 1 SCREW, Hex Flange Whiz Lock, 5/16-18 x 1 27 1960667SM 4 SPACER, 25/64 x 5/8 x 3/16, Hardened 28 1663752SM 2 NUT, Hex Flange Two-Way Lock, 3/8-16 29 1930645SM 2 WASHER, 3/8 30 1924940SM 2 CAPSCREW, Hex Flange Whiz Lock Dog Point, 5/16-18 x 1 31 1960667SM 4

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Lift Group - Hydraulic Lift with Power Steering

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987427

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Lift Group - Hydraulic Lift with Power Steering

PART NO. DESCRIPTIONREF NO QTY.

VALVE, Control 1 1717558SM 1 CYLINDER, Hydraulic 2 1722266SM 1 SHAFT ASSEMBLY, Lift (Used only on SMI / AGCO / Massey models) 3 1727436ASM 1 SUPPORT, Cylinder 4 1722113ASM 1 HANDLE, Lift 5 1722146SM 1 LEVER, Hydraulic 6 1721901SM 1 ROD, Curved Link 7 1727557SM 1 SUPPORT, Control 8 1721904ASM 1 TUBE, Hydraulic 9 1722135SM 1 TUBE, Hydraulic 11 1722138SM 1 TUBE, Hydraulic 3 Bends 12 1733727SM 1 TUBE, Hydraulic (Used only on 4WD Hydro Lift units) 13 1733427SM 1 TUBE, Hydraulic 13 1722297SM 1 FILTER, Oil 14 1719168SM 1 BASE, Oil Filter 15 1719169SM 1 FITTING, Straight 16 1722123SM 4 FITTING, Tee, 3 Ports / Hydraulic Hose 17 1733211SM 1 HOSE ASSEMBLY, Hydraulic 18 1733216SM 2 CAPSCREW, Hex Head, 1/4-20 x 2 G5 19 1921963SM 2 SHAFT ASSEMBLY, Lift (Used only on Snapper models) 20 1727778ASM 1 NUT, Hex Lock ESNA Light 1/4-20 21 1920397SM 1 SCREW, Torx Plus Socket Head 1/4-20 x 7/8 22 1960666SM 1 CAPSCREW, Hex Head 5/16-18 x 1 G5 23 1921333SM 1 CARRIAGE BOLT, 5/16-18 x 3/4 G5 24 1931333SM 8 NUT, Hex Lock ESNA Light 5/16-18 25 1919438SM 1 NUT, Hex KEPS 5/16-18 26 1960636SM 8 NUT, Hex KEPS 1/4-20 27 2828372SM 2 SCREW, Hex Whiz Lock Flange, 1/4-20 x 1/2 28 1931646SM 2 COVER, Dash ABS (SEE NARRATIVE) 29 1722285SM 1 NUT, Hex KEPS 3/8-16 30 1960637SM 2 SCREW, Pan Head Torque, #8-16 x 1/2, Plastite 31 1722607SM 1 PIN, Clevis 32 1722147SM 1 SPACER, Hydraulic Lift Pivot 33 1723244SM 1 CAPSCREW, Hex Head 3/8-16 x 1 G5 34 1921210SM 1 WASHER, 1/2 35 1960027SM 3 PIN, Flat Head Drilled 36 1722819SM 1 FITTING, Elbow 1/2 37 1722122SM 1 SPACER 38 1722148SM 1 FITTING, Elbow 1/2 39 1722141SM 1 CLIP, Hair Pin 40 1960033SM 2 CARRIAGE BOLT, 3/8-16 x 1 G5 41 1931350SM 1 PIN, Cotter 5/8 x 3/4 42 1923360SM 2 SPRING, Extension 43 2156302SM 1 TIE, Self Locking 44 1701011SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Lift Group - Hydraulic Lift with Power Steering

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987427

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Lift Group - Hydraulic Lift with Power Steering

PART NO. DESCRIPTIONREF NO QTY.

LOCKWASHER, Spring 1/4 45 1916964SM 4 CAPSCREW, Hex Head 46 2860444SM 4 POWER STEERING UNIT, w/Hoses 47 1733506SM 1 POWER STEERING UNIT, w/Hoses (Used only on 4WD Hydro Lift units) 47 1734134SM 1 FITTING, Hose Elbow Perma Push 9/16-18 49 1733230SM 4

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Wheels & Tires Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

W987670

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Wheels & Tires Group

PART NO. DESCRIPTIONREF NO QTY.

WHEEL & TIRE ASSEMBLY 1 1733236SM 2 TIRE, 16 x 6-1/2 2 1733485SM 2 TUBE, Tire 3 2153038SM 2 WHEEL ASSEMBLY 4 1733237SM 2 VALVE STEM & CAP 5 2172353SM 4 WASHER, Flat 3/4 x 1-5/8 x 1/8 6 2860202SM 2 WASHER, Flat 7 1722717ASM 2 WASHER, 3/4 8 1960114SM 2 RING 9 2827794SM 2 CAP, Hub 10 1722676SM 4 WASHER, 1 x 2-1/4 x 1/8 11 1960701SM 4 SPACER 12 1726089SM 2 PLATE & HUB WELDMENT 13 1721400SM 2 WHEEL & TIRE ASSEMBLY 14 1733486SM 2 TIRE 15 1733487SM 2 TUBE, Tire 16 2157638SM 2 WHEEL 17 1722831SM 2 NUT, Hex 7/16-20 For Wheel Bolt 18 2177725SM 10 KEY, Hi-Pro 1/4 x 2 19 2105337SM 2 WASHER, Flat 20 1722726ASM 2 WASHER, Flat 21 1919394SM 2 RING 22 2834712SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Decals Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

D987670

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Decals Group

PART NO. DESCRIPTIONREF NO QTY.

DECAL, Simplicity Silver & Blue w/Icon 1 1722551SM 3 DECAL, Prestige, Silver & Blue 2 1722821SM 1 DECAL, 27HP Silver on Clear 3 1733190SM 1 DECAL, Hood Stripe R.H. SMI Blue & Silver 4 1722773SM 1 DECAL, Hood Stripe L.H. SMI Blue & Silver 4 1722774SM 1 DECAL, Ignition Switch Symbols 5 1722806SM 1 DECAL, Tunnel Cover Danger Slopes, Blades 6 1734026SM 1 DECAL, Touch Up Paint 7 1734142SM 1 STICKER, Protection 8 1723296SM 2 DECAL, I.D. Plate 9* 1 DECAL, Patent 10 * 1 DECAL, Transmission Release Valve 11 1723160SM 1 DECAL, I.D. Plate 12 * 1 DECAL, Danger Do Not Operate w/o Deflector 13 1704277SM 1 DECAL, Free Floating Mower (Used only on 54" deck) 14 1722771SM 1 DECAL, OPEI Certified 15 1726789SM 1 DECAL, 50" Silver on Black w/Stripe 16 1706640SM 1 DECAL, 54" Silver w/Black Stripe 16 1722791SM 1 DECAL, Danger Do Not Put Hand/Feet In Mower 17 1704276SM 1 DECAL, 1 2 3 4 5 6, Height of Cut White/Black 18 1721197SM 1 DECAL, 4x4 19 1726373SM 2

Footnotes

NOTE * Not a serviceable part.

The above parts group applies to the following Mfg. Nos.:

1695264 - Prestige 2690680 - Prestige 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

44" & 50" Mower Deck - Clutch & Support Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987599

The above parts group applies to the following Mfg. Nos.:

1695294 - 50" Mower 2690680 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

44" & 50" Mower Deck - Clutch & Support Group

PART NO. DESCRIPTIONREF NO QTY.

HITCH & RODS ASSEMBLY, 4WD 1 1732977ASM 1 ROD 2 1715759SM 1 SPRING, Extension 3 2156302SM 1 PIN, Clevis 4 1733830SM 2 WASHER, 3/4 5 2860202SM 2 CLIP, Hair Pin 6 1960033SM 2 WASHER, 3/8 7 1924356SM 2 CAPSCREW, Hex Head 3/8-15 x 3-1/2 G5 8 1923938SM 1 V-BELT, Arbor Drive (Used only on 50" Mower) 9 1703836SM 1 V_BELT, Arbor Drive (Used only on 44" Mower) 9 1721532SM 1 V-BELT, Mower Drive 70.1 (Used only on 50" Mower) 10 1734114SM 1 V-BELT, Mower Drive 62.1 (Used only on 44" Mower) 10 1734115SM 1 PULLEY, Idler 11 1724387SM 2 WASHER, 3/8 12 1924940SM 12 LOCKWASHER, Spring 3/8 13 1916965SM 2 NUT, Hex 3/8-16 14 1916950SM 2 SPRING, Extension 15 1656936SM 1 LEVER ASSEMBLY, Idler w/Bushing & Fitting 16 1718561SM 1 CARRIAGE BOLT, 3/8-16 x 1-1/2 G5 17 1931352SM 1 SPACER 18 1674669SM 2 LEVER ASSEMBLY, Idler w/Bushings & Fitting 19 1704658SM 1 NUT, Hex Flange 3/8-16 Machine Lock 20 1960339SM 1 GUARD, Belt 21 1677135ASM 1 CARRIAGE BOLT, 3/8-16 x 2 G5 22 1960315SM 1 SPRING, Extension 23 1715435SM 1 NUT, Push Pal 3/8 Diameter Stud Capped 24 1960093SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695294 - 50" Mower 2690680 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

50" Mower Deck - Electric Height Adjustment & Roller Bar Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987701

The above parts group applies to the following Mfg. Nos.:

1695294 - 50" Mower 2690680 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

50" Mower Deck - Electric Height Adjustment & Roller Bar Group

PART NO. DESCRIPTIONREF NO QTY.

NUT, Hex Toplock Spiral lock Flange 3/8-16 1 2860681SM 2 PIN, Locking 2 1722320SM 1 WASHER, 3/8 3 1924940SM 2 PIN, Clevis 1/2 4 1960116SM 1 ROD, Adjusting 5 1722995SM 1 INDICATOR, Cutting Height 10GA 6 1733524ASM 1 SCREW, Hex Washer Head Taptite 5/16-18 x 3/4 7 1664847SM 6 STRAP, Roller 8 1665374SM 3 NUT, Hex 5/8-11 9 1915726SM 2 WASHER, 5/8 10 1924366SM 8 TRUNNION 11 1706645ASM 1 PIN, Round Head Drilled 3/8 x 2 12 2118053SM 1 CLIP, Hair Pin 13 1960074SM 3 CAPSCREW, Hex Head 5/16-18 x 7/8 G5 14 1923325SM 2 BRACKET, Height of Cut 16GA 15 1704116ASM 1 LOCKWASHER, Spring 5/16 16 1917356SM 2 NUT, Hex 5/16-18 17 1917372SM 3 ARM, Rear 18 1733386ASM 1 SHAFT ASSEMBLY, Rocker 50" 19 1733522ASM 1 CARRIAGE BOLT, 3/8-16 x 1-1/2 G5 20 1931352SM 1 SHAFT & BAR ASSEMBLY, Roller 50" Mower 21 1716155ASM 1 BAR 22 1704074ASM 1 NUT, Hex Adjusting Powdered Metal 24 1704082SM 1 SLIDE 25 1677507SM 1 WASHER, 1/2 26 1924361SM 5 BOLT, Shoulder 3/8-16 G5 27 2172622SM 3 NUT, Push for 5/8 Diameter Stud Capped 28 1960520SM 2 ROLLER, Rounded 29 1722036SM 2 SPACER 30 1709195SM 3 ROLLER 31 1668513SM 8 CHAIN, Link 32 1731383ASM 2 ROD, Height Adjusting 33 1731384SM 2 NUT, Hex Jam 5/16-18 34 1920161SM 2 TRUNNION 35 1731382SM 2 SPACER, Split 36 1602946SM 1 CARRIAGE BOLT, 1/2-13 x 2 G5 37 1960706SM 1 NUT, Hex Toplock Flange 1/2-13 38 1960689SM 1 BRACKET, Mounting 10GA 39 1733828ASM 2 SPACER, Powdered Metal 40 1673796SM 1 SCREW, Hex Washer Head Taptite 5/16-18 x 5/8 41 1930601SM 6 PIN, Shear 42 1668344SM 1 CLIP, Hairpin 43 1960221SM 1 CAPSCREW, Hex Head 5/16-18 x 1-1/2 G5 44 1921221SM 1 MOTOR, Electric Mini EHOC Peerless 45 1733513SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695294 - 50" Mower 2690680 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

50" Mower Deck - Electric Height Adjustment & Roller Bar Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987701

The above parts group applies to the following Mfg. Nos.:

1695294 - 50" Mower 2690680 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

50" Mower Deck - Electric Height Adjustment & Roller Bar Group

PART NO. DESCRIPTIONREF NO QTY.

TUBE, Flexible, Split 46 1733895SM 1 SPACER 47 1663752SM 2 NUT, Hex Flange 3/8-16, Machine Lock Large 48 1960339SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695294 - 50" Mower 2690680 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

50" Mower Deck - Housing, Arbors & Blades

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

985972

The above parts group applies to the following Mfg. Nos.:

1695294 - 50" Mower 2690680 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

50" Mower Deck - Housing, Arbors & Blades

PART NO. DESCRIPTIONREF NO QTY.

NUT, Hex Flange, 9/16-18 1 1714419SM 3 WASHER, Bellevilled, 9/16 2 1713675SM 6 PULLEY 3 1713161SM 1 HUB, Double Pulley 4 1713158SM 1 PULLEY 5 1713098SM 3 HUB, Double Pulley 6 1713533SM 1 COVER, Arbor Housing 7 1655729ASM 3 BEARING, Ball, 3/4 x 1-3/4 x 5/8 8 2108202SM 3 SPACER, 21/32 x 3/4 x 5/8 9 1715724SM 3 SPACER, 11/16 x 5/32 x 2-11/16 10 1732544SM 3 BEARING, Ball, 11/16 x 1-9/16 x 15/32 11 1705897SM 3 GASKET, Foam 12 1707335SM 3 HOUSING ASSEMBLY, Arbor Bottom, w/Lube Fitting (Includes Ref. No. 14) 13 1713338ASM 3 FITTING, Grease 14 1704314SM 3 COVER, Arbor 15 1720560ASM 1 CAPSCREW, Hex Head Taptite, 5/16-18 x 3/4 16 1664847SM 26 WASHER, Bellevilled, 9/16, Black 17 1713619SM 3 SHAFT, Arbor (LH) 18 1713612SM 1 SHIELD, Grass, Lower 19 1713196SM 3 BLADE, Mower, 18-1/8 20 1708229ASM 3 WASHER, Hex, 11/16 x 2 21 1713089SM 3 WASHER, Spring 15/32, Black 22 1656916SM 3 CAPSCREW, Hex Head, 7/16-14 x 1 23 2823471SM 3 SHAFT, Arbor (Center & RH) 24 1713195SM 2 MOWER HOUSING ASSEMBLY, 50" Mower (Orange) 25 1722746CSM 1 COVER, Arbor 26 1715673SM 1 CARRIAGE BOLT, 1/4-20 x 7/8 27 1931318SM 2 PLUG, Hole 28 1705115SM 1 BAFFLE, Anti-Blowout, LH (CE/Export) 29 1716870ASM 1 CARRIAGE BOLT, 5/16-18 x 3/4 30 1931333SM 2/11 NUT, Hex, Whizlock, 5/16-18 31 1927557SM 2/11 NUT, Push 32 1960518SM 2 WASHER, 1/4, Black 33 1960353SM 2 CLAMP 34 1704873SM 1 WASHER, 5/16, Black 35 1919326SM 1 SPRING 36 7101082SM 1 CAP, Spring End 37 1723323SM 1 NUT, Hex, 1/4-20 ESNA 39 1920397SM 2 ROD, Deflector, Front 40 1706709SM 1 DEFLECTOR, Plastic 41 1705449SM 1 HUB, Pulley, Center & RH 42 1713197SM 2 BAFFLE, Anti-Blowout, RH (CE/Export) 43 1716869ASM 1 BAFFLE, Anit-Blowout 44 1724538ASM 1 UPSTOP 45 1719929SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695294 - 50" Mower 2690680 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

50" Mower Deck - Housing, Arbors & Blades

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

985972

The above parts group applies to the following Mfg. Nos.:

1695294 - 50" Mower 2690680 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

50" Mower Deck - Housing, Arbors & Blades

PART NO. DESCRIPTIONREF NO QTY.

WASHER 46 1924940SM 2 CAPSCREW, Taptite 5/16-18 x 3/4 47 1960541SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695294 - 50" Mower 2690680 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

54" Mower Deck - Clutch & Support Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987666

The above parts group applies to the following Mfg. Nos.:

1695266 - 54" Mower 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

54" Mower Deck - Clutch & Support Group

PART NO. DESCRIPTIONREF NO QTY.

V-BELT, Engine PTO 1 1734065SM 1 NUT, Hex, 3/8-16 2 1916950SM 2 WASHER, Lock, 3/8 3 1916965SM 2 WASHER, 3/8 4 1924940SM 6 SPACER 5 1674669SM 2 PULLEY 6 1724387SM 2 SPACER 7 2157081SM 1 ASSEMBLY, Lever 8 1720379SM 1 CARRIAGE BOLT, 3/8-16 x 2 9 1960315SM 1 FITTING, Lube 10 2812808SM 1 V-BELT, 54 Mower Deck 11 1671076SM 1 NUT, Hex Flange 3/8-16 12 1960339SM 1 CARRIAGE BOLT, 3/8-16 x 1-1/2 13 1931352SM 1 WASHER, 3/8 14 1924356SM 3 SPACER 15 1674669SM 1 SPACER 16 1657242SM 1 CAPSCREW, Hex Head, 3/8-16 x 4-1/2, G 5 17 1960246SM 1 SPRING 18 1715435SM 1 CAPSCREW, Hex Head, 5/16-18 x 1-1/4, G 5 19 1921977SM 1 WASHER, Lock, 5/16 20 1917356SM 1 NUT, Hex, 5/16-18 21 1917372SM 1 NUT, Hex Center-Lock 5/16-18 22 1923362SM 1 SPRING 23 1656936SM 1 ASSEMBLY, Lever 24 1718561SM 1 PIN, Hitch 25 1720172SM 1 ASSEMBLY, Hitch 26 1686873SM 1 ROD 27 1715759SM 1 SPRING 28 2156302SM 1 PIN, Safety 29 2176012SM 1 PIN, Klik 29 1709189SM* 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695266 - 54" Mower 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

54" Mower Deck - Electric Height Adjust & Roller Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987557

The above parts group applies to the following Mfg. Nos.:

1695266 - 54" Mower 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

54" Mower Deck - Electric Height Adjust & Roller Group

PART NO. DESCRIPTIONREF NO QTY.

HITCH & ROD ASSEMBLY, 54" (Used only on 4WD models) 1 1732977ASM 1 HITCH & ROD ASSEMBLY, 54" (Used only on 2WD models) 1 1733229ASM 1 ROD 2 1715759SM 1 SPRING, Extension 3 2156302SM 1 PIN & WASHER ASSEMBLY (Used only on 2WD models) 4 1734011SM 1 PIN, Klink (Used only on 2WD models) 5 1709189SM 1 PIN, Cotter Locking 6 1722320SM 2 PIN, Yoke 7 1960116SM 2 ROD, Adjusting 8 1722995SM 2 WASHER, 5/8 9 1924366SM 4 NUT, Hex 5/8-11 10 1915726SM 4 TRUNNION 11 1706645ASM 2 PIN, Round Head Drilled 3/8 x 2 12 2118053SM 2 CLIP, Hair Pin 13 1960074SM 2 SHAFT ASSEMBLY, Rocker 54" 14 1733523ASM 1 BRACKET, Height of Cut 15 1704116ASM 1 CAPSCREW, Hex Head 5/16-18 x 7/8 G5 16 1923325SM 2 LOCKWASHER, Spring 5/16 17 1917356SM 2 NUT, Hex 5/16-18 18 1917372SM 3 CARRIAGE BOLT, 3/8-16 x 1-1/2 G5 19 1931352SM 1 STRAP, Rod 20 1720147ASM 3 SCREW, Hex Washer Head Taptite 5/16-18 x 3/4 21 1960541SM 7 INDICATOR, Height 22 1720643ASM 1 SCREW, Hex Washer Head Taptite 5/16-18 x 1-1/4 23 1931202SM 1 STOP, Up 24 1719929SM 1 WASHER, 3/8 25 1924940SM 4 SLIDE 26 1677507SM 1 WASHER, 1/2 27 1924361SM 4 BOLT, Shoulder, 3/8-16 G5 28 2172622SM 3 NUT, Hex Toplock Spiralock Flange 3/8-16 29 2860681SM 2 NUT, Hex Adjusting Powdered Metal 30 1704082SM 1 SPACER 31 1701873SM 6 WASHER, 1 32 2860626SM 14 ROLLER 33 1720159SM 2 ROLLER 34 1678043SM 2 PIN, Cotter 35 1918459SM 2 SHAFT & BAR ASSEMBLY 36 1723008ASM 1 BAR-ROLLER 54 M-BLACK 37 1723009ASM 1 ROLLER W/BUSHINGS 38 1678042SM 8 CHAIN, Link 39 1731383ASM 2 BRACKET, Roller Adjust 40 1734126ASM 2 NUT, Hex Lock ESNA Light 5/16-18 41 1919438SM 4 CAPSCREW, Hex Head 5/16-18 x 1-1/4 G5 42 1921977SM 2 ARM, Rocker 43 1733520ASM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695266 - 54" Mower 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

54" Mower Deck - Electric Height Adjust & Roller Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987557

The above parts group applies to the following Mfg. Nos.:

1695266 - 54" Mower 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

54" Mower Deck - Electric Height Adjust & Roller Group

PART NO. DESCRIPTIONREF NO QTY.

SPACER 44 1602946SM 1 CARRIAGE BOLT, 1/2-13 x 2 G5 45 1960706SM 1 NUT, Hex Toplock Flange 1/2-13 46 1960689SM 1 BRACKET, Mounting 47 1733831ASM 2 WASHER, 5/16 48 1960044SM 2 SCREW, Hex Washer Head Taptite 5/16-18 x 5/8 49 1930601SM 4 PIN, Shear 50 1668344SM 1 CLIP, Hairpin 51 1960221SM 1 SPACER, Powdered Metal 52 1673796SM 1 MOTOR, Electric Mini Actuator 53 1733513SM 1 CAPSCREW, Hex Head 5/16-18 x 1-1/2 G5 54 1921221SM 1 ROD (Used only on 2WD models) 55 1713578SM 1 NUT, Push (Used only on 2WD models) 56 1960519SM 1 TUBE, Flexible 57 1733895SM 1 PIN, Clevis (Used only on 4WD models) 58 1733830SM 2 WASHER, 3/4 (Used only on 4WD models) 59 2860202SM 2 CLIP, Hair Pin (Used only on 4WD models) 60 1960033SM 2 NUT, Hex Flange 3/8-16 Machine Lock 61 1960339SM 2 WASHER, 5/16 62 1919381SM 2 SPACER 63 1663752SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695266 - 54" Mower 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

54" Mower Deck - Housing, Arbor & Cover Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987553

The above parts group applies to the following Mfg. Nos.:

1695266 - 54" Mower 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

54" Mower Deck - Housing, Arbor & Cover Group

PART NO. DESCRIPTIONREF NO QTY.

HOUSING ASSEMBLY, 54" Mower, Orange 1 1687310SM 1 HOUSING ASSEMBLY, 54" Mower, Red 1 1687311SM 1 CAPSCREW, Hex Head 7/16-14 x 1-1/4 G8 2 2823471SM 5 WASHER, Spring 3 1656916SM 3 WASHER, Splined 4 1679711SM 3 BLADE, Mower 20.56 5 1725921SM 2 BLADE, Mower 16.00 6 1725922SM 1 RETAINING RING, Self Locking 7 1657528SM 3 ADAPTER, Blade 8 1655777SM 3 WASHER, Shim 9 1700230SM 3 SHIELD, Bearing 10 1700229SM 3 HOUSING & FITTING ASSEMBLY, Lower 11 1703273ASM 3 GASKET, Foam 12 1707335SM 3 CAPSCREW, Hex Head 5/16-18 x 5/8 G5 13 1925205SM 1 ARBOR SHAFT & BEARINGS ASSEMBLY 14 1676278SM 2 HOUSING, Arbor Top 15 1655729ASM 3 SHIELD, Bearing, Mower Arbor, Upper 16 1657969SM 3 WASHER 17 1933263SM 2 LOCKWASHER, Spring 18 1918199SM 2 CARRIAGE BOLT, 5/16-18 x 3/4 G5 19 1931333SM 2 BAFFLE, Front 20 1720962ASM 1 NUT, Hex KEPS 5/16-18 Conical Washer 21 1960684SM 3 SCREW, Hex Washer Head Taptite 1/4-20 x 3/8 22 1929000SM 4 COVER ASSEMBLY, Upper, Orange 23 1720621CSM 1 COVER ASSEMBLY, Upper, Red 23 1720621DSM 1 COVER, Arbor R.H. 54", Orange 24 1733373CSM 1 COVER, Arbor R.H. 54", Red 24 1733373DSM 1 NUT, Hex Lock ESNA Light 1/4-20 25 1920397SM 2 WHEEL 26 1700184SM 2 WASHER, 1/4 27 1960353SM 1 ROD, Deflector, Front 28 1706709SM 1 NUT, Push 29 1960518SM 2 CARRIAGE BOLT, 1/4-20 x 1 G5 30 1960698SM 2 CLIP, Spring 31 1720623SM 4 NUT, Wing 3/8-16 32 7091049SM 2 DEFLECTOR 33 1705449SM 1 SPRING, Torsion, Chute 34 7101082SM 1 CAP 35 1723323SM 1 WASHER, 5/16 36 1919326SM 1 CLAMP, Wire 37 1704873SM 1 BAFFLE, Discharge 38 1724976ASM 1 SCREW, Hex Washer Head Taptite 5/16-18 x 3/4 39 1664847SM 18 BOLT, Shoulder, 3/8-16 40 7029265SM 2 CAPSCREW, Hex Head 3/8-16 x 1-1/4 G5 41 1920415SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695266 - 54" Mower 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

54" Mower Deck - Housing, Arbor & Cover Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987553

The above parts group applies to the following Mfg. Nos.:

1695266 - 54" Mower 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

54" Mower Deck - Housing, Arbor & Cover Group

PART NO. DESCRIPTIONREF NO QTY.

POST, Anti-Scalp 42 7035835SM 2 NUT, Hex Flange 3/8-16 Two-Way Lock 43 1930645SM 2 ARBOR SHAFT & BEARINGS ASSEMBLY, 40" 44 1726825SM 1 NUT, Hex Flange 9/16-18 45 1714419SM 1 WASHER, Bellville 46 1713675SM 2 WASHER, 1/2 47 1918431SM 1 CAPSCREW, Hex Head 7/16-14 x 2-1/4 G8 48 2827120SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695266 - 54" Mower 2690681 - Prestige

Briggs and Stratton Yard Power Products Group

TP 400-4579-00-PR-S

Hardware Identification & Torque Specifications

Common Hardware Types

Hex Head Capscrew

Carriage Bolt

Standard Hardware Sizing

When a washer or nut is identified as 1/2”, this is the

Nominal size

second number is present it represent the

When bolt or capscrew is identified as 1/2 - 16 x 2”, this means the second number represents the example, and the final number is the bolt or screw (in this example 2 inches long).

, meaning the

Nominal size

inside diameter

, or

body diameter

threads per inch

body length

Washer

Lockwasher

Hex Nut

is 1/2 inch; if a

threads per inch

is 1/2 inch; the

(16 in this

of the

The guides and ruler furnished below are designed to help you select the appropriate hardware and tools.

1/4 3/4

1/2

Nut, 1/2”

Inside Diameter

1/4 3/4

1/2

Screw, 1/2 x 2

1/4 3/4

1/2

1/4 3/4

1/2

Body

Diameter

Body

Length

Torque Specification Chart

FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)

Hardware Grade

Size Of Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.

8-32 8-36 10-24 10-32 1/4-20 1/4-28 5/16-18 11 15.0 17 23.1 25 34.0 5/16-24 12 16.3 19 25.8 27 34.0 3/8-16 20 27.2 30 40.8 45 61.2 3/8-24 23 31.3 35 47.6 50 68.0 7/16-14 30 40.8 50 68.0 70 95.2 7/16-20 35 47.6 55 74.8 80 108.8 1/2-13 50 68.0 75 102.0 110 149.6 1/2-20 55 74.8 90 122.4 120 163.2 9/16-12 65 88.4 110 149.6 150 204.0 9/16-18 75 102.0 120 163.2 170 231.2 5/8-11 90 122.4 150 204.0 220 299.2 5/8-18 100 136 180 244.8 240 326.4 3/4-10 160 217.6 260 353.6 386 525.0 3/4-16 180 244.8 300 408.0 7/8-9 140 190.4 400 544.0 600 816.0 7/8-14 155 210.8 440 598.4 660 897.6 1-8 220 299.2 580 788.8 900 1,244.0 1-12 240 326.4 640 870.4 1,000 1,360.0

1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews.

2. Recommended seating torque values for locknuts:

a. for prevailing torque locknuts - use 65% of grade 5

torques.

b. for flange whizlock nuts and screws - use 135% of

grade 5 torques.

3. Unless otherwise noted on assembly drawings, all torque values must meet this specification.

Marks

SAE Grade 2 SAE Grade 5 SAE Grade 8

in/lbs in/lbs

2.1

2.3

3.1

3.5

7.6 8 10.9 12 16.3

8.6 10 13.6 14 19.0

30 31 43 49

NOTES

3.4

3.5

4.9

5.5

in/lbs

41 43 60 68

420 571.2

4.6

4.9

6.8

7.7

Wrench & Fastener Size Guide

1/4

1/4” Bolt or Nut

Wrench—7/16”

5/16

5/16” Bolt or Nut

Wrench—1/2”

3/8

3/8” Bolt or Nut

Wrench—9/16”

7/16 DIA.

7/16” Bolt or Nut

Wrench (Bolt)—5/8”

Wrench (Nut)—11/16”

1/2

DIA.

1/2” Bolt or Nut

Wrench—3/4”

MANUFACTURING, INC.

500 N. Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA

www.simplicitymfg.com

Briggs and Stratton Yard Power Products Group

Snapper 4579 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual