Attachment
g
Illustrated
Parts List
Attachment
. No. Description
Mf
1694693 Catcher, Turbo Clean Sweep Twin
MANUFACTURING, INC.
500 N. Spring Street / PO Box 997
Port Washington, WI 53074-0997 USA
www.simplicitymfg.com
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved. Printed In USA.2007
Part No.:
TP 400-4564-00-AT-SMA
Rev.
1734848
04/2007
Table Of Content
s
PRODUCT COMPONENTS PAGES
Cover & Bag Group - Twin ...................................................................................................................................
Hitch Group ..........................................................................................................................................................
Tube Group ..........................................................................................................................................................
Torque Specification Chart ..................................................................... Inside Back Cover
4
6
8
Cover & Bag Group - Twin
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
983952
The above parts group applies to the following Mfg. Nos.:
1694693 - Catcher
Briggs and Stratton Yard Power Products Group
2007Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
4
TP 400-4564-00-AT-SMA
Cover & Bag Group - Twin
PART NO. DESCRIPTIONREF NO QTY.
TUBE ASSEMBLY Support (Incl. Ref. Nos. 2, 3, 4, 5, 6, 8, 9 & 11) 1 1704615SM 1
RIVET, Pop 2 1960381SM 7
SUPPORT, Tube 3 1704075SM 1
SEAL, Cover 4 1704135SM 1
BRACKET, Seal 5 1704508SM 3
SCREW, Round Head, #8-32 x 7/8 6 1960399SM 1
LOCKNUT, Flange, 1/4-20 7 1930642SM 5
WASHER 8 1960096SM 2
STRAP, Tube Support 9 1704507SM 1
SCREW, Taptite, 1/4-20 x 3/8 10 1929000SM 2
NUT, Hex, Lock, #8-32 11 1960077SM 2
CARRIAGE BOLT, 1/4-20 x 5/8 12 1960252SM 5
CROSS ASSEMBLY 13 1727129ASM 1
CROSS ASSEMBLY 13 1727129ASM 1
CAPSCREW, Hex Head, 3/8-16 x 7/8 14 1921966SM 4
NUT, Hex, Whizlock, 3/8-16 15 1928352SM 4
CLIP, Hairpin 16 1960221SM 2
SCREEN 17 1703700SM 1
NUT, Hex, 5/16-18 18 1917372SM 4
LOCKWASHER, 5/16 19 1917356SM 4
CLAMP 20 1672023ASM 2
HANGER 21 1703807ASM 2
CARRIAGE BOLT, 5/16-18 x 3/4 22 1931333SM 4
HOOP, Bag 23 1703855ASM 2
BAG, Grass 24 1703764SM 2
TUBE CLIP, Grass Bag 25 1675707SM 2
SEAL, Clip 26 1704057SM 1
SCREW, Truss Head, #10-32 x 1/2 27 1930531SM 2
RIVET, Pop 28 1675043SM 4
HANDLE, Latch 29 1703853SM 1
NUT, Hex, #10-32 30 1928919SM 2
PIN, Round Head 31 2860367SM 2
WASHER 32 1910531SM 4
CLIP, Canoe 33 1667248SM 6
DECAL, Safety 34 1732820SM 1
COVER 35 1704056SM 1
WINDOW 36 1704180SM 2
NUT, Speed 37 1933886SM 1
CABLE, Double Loop 38 1705876SM 1
WASHER, 1/4 39 1921319SM 1
SCREW, Self-tapping, #10-12 x 5/8 40 1960400SM 1
COVER ASSEMBLY (Incl. Ref. Nos. 17, 26, 28, 32, 37, 38, 39 & 40) 41 1704056SM 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
1694693 - Catcher
Briggs and Stratton Yard Power Products Group
2007Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
5
TP 400-4564-00-AT-SMA
Hitch Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
986032
The above parts group applies to the following Mfg. Nos.:
1694693 - Catcher
Briggs and Stratton Yard Power Products Group
2007Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
6
TP 400-4564-00-AT-SMA
Hitch Group
PART NO. DESCRIPTIONREF NO QTY.
CAPSCREW, Hex Head, 1/2-13 x 2-1/2 1 1960462SM 4
WASHER 2 1924361SM 4
SPACER 3 1668662SM 4
LOCKNUT, Hex, 1/2-13 4 1960355SM 4
NUT, Hex, 3/8-16 5 1916950SM 6
LOCKWASHER, 3/8 6 1916965SM 6
SUPPORT, Upright 7 1707526ASM 1
CAPSCREW, Hex Head, 3/8-16 x 1 8 1921210SM 6
BRACKET, Lower Hitch 9 1703744ASM 1
SUPPORT, Side Hitch 10 1723067ASM 2
CAPSCREW, Hex Head, 3/8-16 x 1-1/4 11 1920415SM 6
PLATE, Side 12 1723044ASM 2
CLIP, Hair Pin 13 1960033SM 2
CARRIAGE BOLT, 3/8-16 x 3/4 14 1931348SM 4
CLAMP, Hitch 15 1723065SM 1
CLAMP, Plate 16 1723064ASM 1
NUT, Hex, 5/16-18 17 1917372SM 2
LOCKWASHER 18 1917356SM 2
PIN, Round Head, Drilled 19 1729281SM 2
SPACER 20 1960236SM 2
CARRIAGE BOLT, 5/16-18 x 1-1/4 21 1960223SM 2
SUPPORT, Upright 22 1707526ASM 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
1694693 - Catcher
Briggs and Stratton Yard Power Products Group
2007Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
7
TP 400-4564-00-AT-SMA
Tube Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
T986032
The above parts group applies to the following Mfg. Nos.:
1694693 - Catcher
Briggs and Stratton Yard Power Products Group
2007Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
8
TP 400-4564-00-AT-SMA
Tube Group
PART NO. DESCRIPTIONREF NO QTY.
NUT, Hex Nylock, #10-32 1 1933896SM 2
WASHER 2 1960096SM 6
ELBOW, Upper 4 1704283SM 1
SCREW, Truss Head, #10-32 x 1/2 5 1960404SM 2
RIVET 6 2810542SM 2
CLIP, Spring 7 1705063SM 1
TUBE & SPRING ASSEMBLY (Incl. Ref. Nos. 2, 6, & 7) 8 1707712SM 1
CARRIAGE BOLT, 1/4-20 x 5/8 9 1960252SM 1
NUT, Hex Flange Lock, 1/4-20 10 1930641SM 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
1694693 - Catcher
Briggs and Stratton Yard Power Products Group
2007Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
9
TP 400-4564-00-AT-SMA
Hardware Identification & Torque Specifications
Common Hardware Types
Hex Head Capscrew
Carriage Bolt
Standard Hardware Sizing
When a washer or nut is identified as 1/2”, this is the
Nominal size
second number is present it represent the
When bolt or capscrew is identified as 1/2 - 16 x 2”, this
means the
second number represents the
example, and the final number is the
bolt or screw (in this example 2 inches long).
, meaning the
Nominal size
inside diameter
, or
body diameter
threads per inch
body length
Washer
Lockwasher
Hex Nut
is 1/2 inch; if a
threads per inch
is 1/2 inch; the
(16 in this
of the
The guides and ruler furnished below are designed to
help you select the appropriate hardware and tools.
0
1/4 3/4
1/2
Nut, 1/2”
Inside
Diameter
1
1/4 3/4
1/2
Screw, 1/2 x 2
2
1/4 3/4
1/2
3
1/4 3/4
1/2
4
Body
Diameter
Body
Length
Torque Specification Chart
FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
Hardware
Grade
Size Of
Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.
8-32
8-36
10-24
10-32
1/4-20
1/4-28
5/16-18 11 15.0 17 23.1 25 34.0
5/16-24 12 16.3 19 25.8 27 34.0
3/8-16 20 27.2 30 40.8 45 61.2
3/8-24 23 31.3 35 47.6 50 68.0
7/16-14 30 40.8 50 68.0 70 95.2
7/16-20 35 47.6 55 74.8 80 108.8
1/2-13 50 68.0 75 102.0 110 149.6
1/2-20 55 74.8 90 122.4 120 163.2
9/16-12 65 88.4 110 149.6 150 204.0
9/16-18 75 102.0 120 163.2 170 231.2
5/8-11 90 122.4 150 204.0 220 299.2
5/8-18 100 136 180 244.8 240 326.4
3/4-10 160 217.6 260 353.6 386 525.0
3/4-16 180 244.8 300 408.0
7/8-9 140 190.4 400 544.0 600 816.0
7/8-14 155 210.8 440 598.4 660 897.6
1-8 220 299.2 580 788.8 900 1,244.0
1-12 240 326.4 640 870.4 1,000 1,360.0
1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
torques.
b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.
3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.
No
Marks
SAE Grade 2 SAE Grade 5 SAE Grade 8
in/lbs in/lbs
19
2.1
20
2.3
27
3.1
31
3.5
66
7.6 8 10.9 12 16.3
76
8.6 10 13.6 14 19.0
30
31
43
49
NOTES
3.4
3.5
4.9
5.5
in/lbs
41
43
60
68
420 571.2
4.6
4.9
6.8
7.7
Wrench & Fastener Size Guide
1/4
1/4” Bolt or Nut
Wrench—7/16”
5/16
5/16” Bolt or Nut
Wrench—1/2”
3/8
3/8” Bolt or Nut
Wrench—9/16”
7/16
DIA.
7/16” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench (Nut)—11/16”
1/2
DIA.
1/2” Bolt or Nut
Wrench—3/4”
Loading...