Attachment
g
Illustrated
Parts List
Attachment
. No. Description
Mf
1694918 Catcher, Clean Sweep Triple
MANUFACTURING, INC.
500 N. Spring Street / PO Box 997
Port Washington, WI 53074-0997 USA
www.simplicitymfg.com
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved. Printed In USA.2007
Part No.:
TP 400-4553-01-AT-SMA
Rev.
1734832
10/2007
Table Of Content
s
PRODUCT COMPONENTS PAGES
Triple Catcher Assembly ......................................................................................................................................
Torque Specification Chart ..................................................................... Inside Back Cover
4
Triple Catcher Assembly
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
1694918
The above parts group applies to the following Mfg. Nos.:
1694918 - Catcher
Briggs and Stratton Yard Power Products Group
2007Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
4
TP 400-4553-01-AT-SMA
Triple Catcher Assembly
PART NO. DESCRIPTIONREF NO QTY.
Footnotes
COVER ASSEMBLY, Triple with Decal 1 1732817SM 1
SCREW, #10 - 24 x 5/8 2004x21MA2
HANDLE, Cover 3 054537MA 1
LOCKNUT, #10 - 24, ESNA 4 1933896SM 2
EDGING, 11" Long PVC 5 1732870SM 3
BAG ASSEMBLY, Triple 6 1732351SM 3
PLUG, Round 7 054776MA 8
TUBE, Round Bag 8 054753E701MA 4
PLUG, Square 9 054777MA 2
NUT, Centerlock Flange, 5/16 - 18 10 1935048SM 9
CAPSCREW, 5/16 - 18 x 2 11 1921978SM 6
TUBE, Square 12 054761MA 1
LOCKNUT, 1/4 - 20, Keps 13 1928372SM 6
SCREW, 1/4 - 20 x 1/2, Slotted 14 004x24MA 5
PIN, Cover Hinge 15 054407ZMA 1
HINGE, Cover 16 054754E701MA 1
PIN, Hair 17 1960074SM 1
CHANNEL ASSEMBLY 18 1732869SM 1
CAPSCREW, 5/16 - 18 x 2-1/4 19 1921160SM 2
PIN, Channel Mount 20 1732565SM 1
MOUNT ASSEMBLY, Channel 21 1732067ASM 1
PIN, Hair 22 1960033SM 1
BOLT, Shoulder, 5/16 - 18 23 1728976SM 2
NUT, Speed, 5/16 - 18 24 1960717SM 2
ELBOW, Upper Tube 25 1732446SM 1
TUBE, Clear 26 1732552SM 1
SCREW, 1/4 - 20 x 1 27 004x71MA 1
HANDLE, Tube 28 054416ZMA 1
STRAP, Rubber 29 2171600SM 2
NUT, Centerlock Flange, 1/4 - 20 30 1930642SM 2
BOOT, 44/50" Mower 31 1731426SM 1
PIN, Latch 32 054563MA 1
BOLT, Carriage, 1/4 - 20 x 5/8 33 1960252SM 1
NUT, Whizlock Flange, 5/16 - 18 34 1927557SM 11
ROD, Boot Mount 35 1731428SM 1
SCREW, Whizlock, 5/16 - 18 x 1-1/4 36 1930595SM 1
SCREW, 5/16 - 18 x 3/4 37 1960371SM 1
PLATE, Rod Mount 38 1726578ASM 1
BOLT, Carriage, 5/16 - 18 x 5/8 39 1931332SM 9
BAFFLE, R.H. 44" 40 1731990ASM 1
BAFFLE, R.H. 50" 40 1726364ASM 1
BAFFLE, L.H. 44" 41 1716879ASM 1
BAFFLE, L.H. 50" 41 1716870ASM 1
ID LABEL/SERIAL PLATE (Not Serviceable) 42 ----- 1
The above parts group applies to the following Mfg. Nos.:
1694918 - Catcher
Briggs and Stratton Yard Power Products Group
2007Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
5
TP 400-4553-01-AT-SMA
Triple Catcher Assembly
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
1694918
The above parts group applies to the following Mfg. Nos.:
1694918 - Catcher
Briggs and Stratton Yard Power Products Group
2007Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
6
TP 400-4553-01-AT-SMA
Triple Catcher Assembly
PART NO. DESCRIPTIONREF NO QTY.
OVERLAY, Mylar (Not Serviceable) 43 ----- 1
SCREEN 44 1732492SM 1
SCREEN SUPPORT 45 1732493SM 1
RIVET, Pop 46 1673320SM 18
WASHER 47 1910531SM 12
FASTENER 48 1732490SM 5
DECAL, Cover Warning 49 1732819SM 1
INSTRUCTION MANUAL -- 1732353 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
1694918 - Catcher
Briggs and Stratton Yard Power Products Group
2007Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
7
TP 400-4553-01-AT-SMA
Hex Head Capscrew
Hex Nut
Lockwasher
Washer
Carriage Bolt
Hardware Identification & Torque Specifications
Screw, 1/2 x 2
Body
Diameter
Body
Length
Inside
Diameter
Nut, 1/2”
No
Marks
3/8” Bolt or Nut
Wrench—9/16”
3/8
5/16” Bolt or Nut
Wrench—1/2”
5/16
1/4” Bolt or Nut
Wrench—7/16”
1/4
1/2” Bolt or Nut
Wrench—3/4”
1/2
DIA.
7/16
DIA.
7/16” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench (Nut)—11/16”
Wrench & Fastener Size Guide
0
1/4 3/4
1/2
1
1/4 3/4
1/2
2
1/4 3/4
1/2
3
1/4 3/4
1/2
4
Common Hardware Types
Torque Specification Chart
FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
Hardware
Grade
Size Of
Standard Hardware Sizing
When a washer or nut is identified as 1/2”, this is the
Nominal size
second number is present it represent the
When bolt or capscrew is identified as 1/2 - 16 x 2”, this
means the
second number represents the
example, and the final number is the
bolt or screw (in this example 2 inches long).
, meaning the
Nominal size
inside diameter
, or
body diameter
threads per inch
is 1/2 inch; if a
threads per inch
is 1/2 inch; the
body length
(16 in this
of the
The guides and ruler furnished below are designed to
help you select the appropriate hardware and tools.
Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.
8-32
8-36
10-24
10-32
1/4-20
1/4-28
5/16-18 11 15.0 17 23.1 25 34.0
5/16-24 12 16.3 19 25.8 27 34.0
3/8-16 20 27.2 30 40.8 45 61.2
3/8-24 23 31.3 35 47.6 50 68.0
7/16-14 30 40.8 50 68.0 70 95.2
7/16-20 35 47.6 55 74.8 80 108.8
1/2-13 50 68.0 75 102.0 110 149.6
1/2-20 55 74.8 90 122.4 120 163.2
9/16-12 65 88.4 110 149.6 150 204.0
9/16-18 75 102.0 120 163.2 170 231.2
5/8-11 90 122.4 150 204.0 220 299.2
5/8-18 100 136 180 244.8 240 326.4
3/4-10 160 217.6 260 353.6 386 525.0
3/4-16 180 244.8 300 408.0 420 571.2
7/8-9 140 190.4 400 544.0 600 816.0
7/8-14 155 210.8 440 598.4 660 897.6
1-8 220 299.2 580 788.8 900 1,244.0
1-12 240 326.4 640 870.4 1,000 1,360.0
1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
b. for flange whizlock nuts and screws - use 135% of
3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.
SAE Grade 2 SAE Grade 5 SAE Grade 8
in/lbs in/lbs
19
2.1
20
2.3
27
3.1
31
3.5
66
7.6 8 10.9 12 16.3
76
8.6 10 13.6 14 19.0
torques.
grade 5 torques.
30
31
43
49
NOTES
in/lbs
3.4
3.5
4.9
5.5
41
43
60
68
4.6
4.9
6.8
7.7
Loading...