Snapper 410 User Manual

Specifications and Main Features

  • Model: 410 Series Trimmer Engine
  • Fuel Tank Capacity: 1000cc or 34oz
  • Clutch Inside Drum Diameter Indication: 2.992 or 3.070 inches
  • Idle Set Speed (RPM): 2300-2700
  • Maximum Output: 1.14KW or 1.54HP
  • Continuous Rated Output: 1.3KW or 1.34HP
  • Maximum Torque: 1.07NM
  • Recommended Output (Range): Not defined
  • Crankcase Material: Ductile cast aluminium
  • Engine Type: Based 2 cycle engine with diaphragm type of carburetor
  • Dimension of Piston: Specific measurement not availiable
  • Diaphragm/Piston Type Carburetor: Yes
  • Fuel System Components: Fuel Tank, Tank Cap, Primer Pump, Fuel Hose and filter
  • Air Filter: Plastic Air Filter with Polyurethane Foam Element
  • Muffler: Spare material, should be cleaned periodically maintenance of muffler is highly recommended
  • Flywheel: Magnetic steel with Cooling Fins
  • Ignition System: Breaker points and MTI unit are also options for this make in this category consider
  • Recoil Starter: Its a unit consice of return spring separately assembled with a return sRping. a
  • Maintenance Interval for Air Filter: Shall be done after every 25hour or less
  • Compatibility: Can only be used with normal fuel mixture 32:1

Frequently Asked Questions

Q: What type of fuel mix should be used with the Snapper 410 Trimmer Engine?

A: It is advised to use a fuel mix with oil and gasoline at a ratio of 32:1.

Q: How frequently should the air filter be attended to or cleaned?

A: The maintenance menu on every machine should indicate that the air filter needs cleaning after operating the machine for 25 hours.

Q: For the Snapper 410 Trimmer Engine, what is the maximum size of the fuel tank?

A: It has a fuel tank capacity of 1.0 liter (34 oz).

Q: In the Snapper 410 Trimmer Engine, which type of carburetor is installed?

A: The type of carburetor fitted to the engine is diaphragm type.

Q: What steps can be taken when the engine won’t start?

A: Look into the level of the fuel to determine whether it is sufficient, double-check that the fuel mixture is accurate, and lastly examine the spark plug for signs of wear and tear.

User Manual

Snapper 410 User Manual
Loading...
+ 23 hidden pages