Snapper 355ZB2654, 355ZB2450, 355ZB2444 Owner’s Manual

OPERATOR'S

MANUAL

24HP Zero-Turn Riders Mfg. No. Description

5900660 ZT3000B2444, Simplicity 24HP B&S ZT3000 Zero-Turn Rider with 44" Mower 5900662 ZT3000B2450, Simplicity 24HP B&S ZT3000 Zero-Turn Rider with 50" Mower

5900684 ZT3000B2450CE, Simplicity 24HP B&S ZT3000 Zero-Turn Rider with 50" Mower

(CE/Export)

5900681 5900682 5900685

5900768 5900760

355ZB2444, Snapper 24HP B&S 355Z Zero-Turn Rider with 44" Mower 355ZB2450, Snapper 24HP B&S 355Z Zero-Turn Rider with 50" Mower

355ZB2450CE, Snapper 24HP B&S 355Z Zero-Turn Rider with 50" Mower

(CE/Export) 355ZB2654 DLR, Snapper 26HP B&S 355Z Zero-Turn Rider with 54" Mower 360ZB2450CE, Snapper 24HP B&S 360Z Zero-Turn Rider with 50" Mower

(CE/Export)

Form No. 5101066

Revision D

Rev.Date 6/2008

TP 100-7327-D-CH-SMN

Thank you for purchasing this quality-built product. We're pleased that you've

placed your confidence in the Simplicity and Snapper brand. When operated and maintained according to the instructions in this manual, your product will provide

many years of dependable service.

This manual contains safety information to make you aware of the

hazards and risks associated with this machine and how to avoid them. This machine is designed and intended to be used and maintained according to the

manual for finish cutting of established lawns and is not intended for any other purpose. It is important that you read and understand these instructions thoroughly before attempting to start or operate this equipment.

Unit Model Number Unit SERIALNumber

MowerDeckModelNumber MowerDeckSERIALNumber

DealerName DatePurchased

iiiil!liiiii!

EngineMake EngineModel

EngineType/Spec. EngineCode/SerialNumber

See Page 8 for the location of Identification Numbers

DATE PURCHASED

IIIIIIIII

The Simplicity logo is a trademark of Briggs & Stratton Corporation Milwaukee, WI, USA.

Contact Information: Simplicity Manufacturing, Inc.

P.O. Box 997 500 N. Spring St.

Port Washington, WI 53074-0997 www.simplicitymfg.com

A WARNING

Engine exhaust from this product contains

chemicals known, in certain quantities, to cause cancer, birth defects, or other

reproductive harm.

The Snapper logo is a trademark of Briggs & Stratton Corporation Milwaukee, WI, USA.

Contact Information: Snapper Products

535 Macon St. McDonough, GA 30253 www.snapper.com

TableofContents

Safety Rules & Information ................................. 2

Identification Numbers ............................................ 8

Safety Decals .......................................................... 9

Safety Interlock System ........................................ 10

Safety Icons .......................................................... 11

Features & Controls .......................................... 12

Control Functions.................................................. 12

Operation ........................................................... 14

General Operating Safety ..................................... 14

Checks Before Starting ......................................... 14

Starting the Engine ............................................... 15

Stopping the Rider & Engine ................................. 15

Pushing the Rider by Hand ................................... 15

Zero Turn Driving Practice ..................................... 16

Mower Removal & Installation ............................... 18

Mowing .................................................................. 19

Mowing Recommendations ................................... 19

Mowing Methods ................................................... 20

Attaching a Trailer.................................................. 21

Regular Maintenance ........................................ 22

Schedule ............................................................... 22

Lubrication ............................................................ 23

Servicing the Mower Blades ................................. 24

Checking Tire Pressures ....................................... 26

Adding Fuel ........................................................... 26

Fuel Filter .............................................................. 26

Check Engine Oil & Filter ...................................... 27

Engine Maintenance ............................................. 27

Check/Fill Transmission Oil ................................... 28

Transmission Oil Filter Change ............................. 28

Battery Maintenance ............................................. 29

Storage .................................................................. 29

Troubleshooting, Adjustments & Service ....... 30

Troubleshooting the Rider ..................................... 30

Troubleshooting the Mower ................................... 31

Common Cutting Problems ................................... 32

Seat Adjustment .................................................... 33

Ground Speed Control Lever Adjustment ............. 33

Speed Balancing Adjustment ................................ 34

Cutting Height Adjustment .................................... 34

Neutral Adjustment ................................................ 34

Parking Brake Adjustment ..................................... 35

Suspension Adjustment ........................................ 35

PTO Clutch Adjustment ......................................... 36

Blade Brake Check ............................................... 36

Mower Deck Leveling ............................................ 37

Roller Bar Leveling ................................................ 38

Mower Belt Replacement ...................................... 38

Hydraulic Pump Drive Belt Replacement .............. 39

Battery Charging ................................................... 39

Specifications .................................................... 40

Technical Manuals ............................................. 40

NOTE: In this manual, "left" and "right" are referred to as seen from the operating position.

SafetyRules& information

ReadtheManual

OperatingSafety

Congratulations on purchasing a superior-quality piece of lawn and garden equipment. Our products are designed and manufactured to meet or exceed all industry standards for safety.

Do not operate this machine unless you have been trained.

Reading and understanding this operator's manual is a way to

train yourself.

Power equipment is only as safe as the operator. If it is misused, or not properly maintained, it can be dangerous! Remember, you are responsible for your safety and that of those around you.

Use common sense, and think through what you are doing. If you are not sure that the task you are about to perform can be safely done with the equipment you have chosen, ask a professional: contact your local authorized dealer.

The operator's manual contains important safety information you need to be aware of BEFORE you operate your unit as well as DURING operation.

Safe operating techniques, an explanation of the product's features and controls, and maintenance information is included to help you get the most out of

your equipment investment.

Be sure to completely read the Safety Rules and Information found on the following pages. Also completely read the Operation section.

Children

Tragic accidents can occur with children. Do

not allow them anywhere near the area of

operation. Children are often attracted to the

unit and mowing activity. Never assume that

children will remain where you last saw them.

If there is a risk that children may enter the

area where you are mowing, have another

responsible adult watch them.

2 www.simplicitymfg.com I www.snapper.com

SafetyRules&information

SlopeOperation

Operation on slopes can be dangerous. Using the unit on a slope that is too steep where you do not have adequate wheel traction

(and control) can cause sliding, loss of steering, control, and

possible rollover. You should not operate on a slope greater than a

5.4 foot rise over a 20 foot length (15 degrees). Always mow across slopes, not up and down (to maintain traction

on the wheels) and avoid sudden turns or rapid speed changes.

Reduce speed and use extreme caution on ALL slopes.

Also, note that the surface condition you are on can greatly impact your ability to safely operate this machine. Operating on wet or slippery slopes can cause sliding and loss of steering and control.

Do not operate on slopes that are slippery, wet, or have soft soil

conditions.

If you feel unsure about operating the unit on a slope, don't do it. It's not worth the risk.

ThrownObjects

This unit has spinning mower blades. These blades can pick up and

throw debris that could seriously injure a bystander. Be sure to clean

up the area to be mowed and remove objects that could be thrown by

the blade BEFORE you start mowing.

Do not operate this unit without the entire grass catcher or discharge guard (deflector) in place.

Also, do not allow anyone in the area while the unit is running! If someone does enter the area, shut the unit off immediately until they

leave.

This equipment has many moving parts that can injure you or someone else. However, if you stay in the operator zone (stay seated in the seat), and follow the safety rules in this operator's manual, the unit is safe to operate.

The mower deck has spinning mower blades that can amputate hands and feet. Do not allow anyone near the unit while it is running! Keep safety devices (guards, shields, and switches) in place and working.

To help you, the operator, use this equipment safely, it is equipped with an operator-present safety system. Do NOT attempt to alter or bypass the system. See your dealer immediately if the system does not pass all the safety interlock system tests found in this manual.

MovingParts

SafetyRules& information

RetainingWalls,Drop-offs,andWater

Retaining walls and drop-offs around steps and water are a common hazard. Give yourself a minimum of two mower widths of clearance around these hazards and hand-trim with a walk behind mower or string trimmer. Wheels dropping over retaining walls, edges, ditches, embankments, or into water can cause rollovers, which may result in serious injury, death, or drowning.

FuelandMaintenance

Always disengage all drives, shutoff the engine, and remove the key before doing any cleaning, refueling, or servicing.

Gasoline and its vapors are extremely flammable. Do not smoke while operating or refueling. Do not add fuel while engine is hot or running. Allow engine to cool for at least 3 minutes prior to adding fuel.

Do not add fuel indoors, in an enclosed trailer, garage, or any other enclosed area that is not well ventilated. Gasoline spills should be cleaned up promptly and before operation begins.

Gasoline should be stored only in sealed containers approved for fuel.

Proper maintenance is critical to the safety and performance of your unit. Keep the unit free of grass, leaves, and excess oil. Be sure to perform the maintenance procedures listed in this manual, especially periodically testing the safety system.

EnclosedAreas

Only operate this unit outdoors and away from unventilated areas such as inside garages or enclosed

trailers. The engine emits poisonous carbon monoxide

gas and prolonged exposure in an enclosed area can result in serious injury or death.

4 www.simplicitymfg.com I www.snapper.com

SafetyRules&information

Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control

of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. This mowing deck is capable of amputating hands and feet and throwing objects. The triangle

in text signifies important cautions or warnings which must be followed.

GENERAL OPERATION

1. Read, understand, and follow all instructions in the manual and on the unit before starting.

2. Do not put hands or feet near rotating parts or under the machine. Keep clear of the discharge

opening at all times.

3. Only allow responsible adults, who are familiar with

the instructions, to operate the unit (local

regulations can restrict operator age).

4. Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the

blade(s).

5. Be sure the area is clear of other people before mowing. Stop the unit if anyone enters the area.

6. Never carry .passengers.

7. Do not mow in reverse unless absolutely necessary. Always look down and behind before

and while travelling in reverse.

8. Never direct discharge material toward anyone.

Avoid discharging material against a wall or obstruction. Material may ricochet back toward the

operator. Stop the blade(s) when crossing gravel

surfaces.

9. Do not operate the machine without the entire grass catcher, discharge guard (deflector), or other

safety devices in place and operational.

10. Slow down before turning.

11. Never leave a running unit unattended. Always disengage the blades (PTO), set parking brake,

stop engine, and remove keys before dismounting.

12. Disengage blades (PTO) when not mowing. Shut off engine and wait for all parts to come to a

complete stop before cleaning the machine,

removing the grass catcher, or unclogging the

discharge guard.

13. Operate the machine only in daylight or good artificial light.

14. Do not operate the unit while under the influence of alcohol or drugs.

15 Watch for traff=cwhen operating near or crossing

roadways.

16. Use extra care when loading or unloading the unit

into a trailer or truck.

17. Always wear eye protection when operating this

unit.

18. Data indicates that operators, age 60 years and above, are involved in a large percentage of power

equipment-related injuries. These operators

should evaluate their ability to operate the equipment safely enough to protect themselves

and others from injury.

19. Follow the manufacturer's recommendations for wheel weights or counterweights.

20. Keep in mind the operator is responsible for accidents occurring to other people or property.

21. All drivers should seek and obtain professional and practical instruction.

22. Always wear substantial footwear and trousers.

Never operate when barefoot or wearing sandals.

23. Before using, always visually check that the blades and blade hardware are present, intact, and

secure. Replace worn or damaged parts.

24. Disengage attachments before: refueling, removing an attachment, making adjustments (unless the

adjustment can be made from the operator's pcosition).

25. When the machine is parked, stored, or left

unattended, lower the cutting means unless a

positive mechanical lock is used.

26. Before leaving the operator's position for any

reason, engage the parking brake (if equipped),

disengage the blades (PTO), stop the engine, and

remove the key.

27. To reduce fire hazard, keep the unit free of grass,

leaves, & excess oil. Do not stop or park over dry leaves, grass, or combustible materials.

28. It is a violation of California Public Resource Code Section 4442 to use or operate the engine on or

near any forest-covered, brush-covered, or grass-

coveredland unless the exhaust system is equipped with a spark attester meeting any

apphcable local or state laws. Other states or federal areas may have similar laws.

29. OSHA regulations may require the use of hearing protection when exposed to sound levels greater

than 85 dBA for an 8 hour time period.

A CAUTION

excess of 85 dBA at the operator's ear

=_ his machine produces sound levels in

and can cause hearing loss through extended periods of exposure.

Wear hearing protection when operating this

machine.

TRANSPORTING AND STORAGE

1. When transporting the unit on an open trailer, make sure it is facing forward, in the direction of

travel. If the unit is facing backwards, wind lift could damage the unit.

2. Always observe safe refueling and fuel handling practices when refueling the unit after

transportation or storage.

3. Never store the unit (with fuel) in an enclosed poorly ventilated structure. Fuel vapors can travel

to an ignition source (such as a furnace, water

heater, etc.) and cause an explosion. Fuel vapor is

also toxic to humans and animals.

4. Always follow the engine manual instructions for storage preparations before storing the unit for

both short and long term periods.

5. Always follow the engine manual instructions for proper start-up procedures when returning the unit

to service.

6. Never store the unit or fuel container inside where there is an open flame or pilot light, such as in a

water heater. Allow unit to cool before storing.

SafetyRulesandinformation

SLOPE OPERATION

Slopes are a major factor related to loss-of-control and

tip-over accidents, which can result in severe injury or

death. Operation on all slopes requires extra caution. If

you cannot back up the slope or if you feel uneasy on it,

do not operate on it. Control of a walk-behind or ride-on machine sliding on a

slope will not be regained by the application of the brake. The main reasons for loss of control are:

insufficient tire grip on the ground, speed too fast, inadequate braking, the type of machine is unsuitable for its task, lack of awareness of the ground conditions, incorrect hitching and load distribution.

1. Mow across slopes, not up and down.

2. Watch for holes, ruts, or bumps. Uneven terrain could overturn the unit. Tall grass can hide obstacles.

3. Choose a slow speed so that you will not have to

stop or change speeds while on the slope.

4. Do not mow on wet grass. Tires may loose traction.

5. Avoid starting, stopping, or turning on a slope. If tires lose traction (i.e. machine stops forward

motion on a slope), disengage the blade(s) (PTO)

and drive slow off the slope.

6. Keep all movement on slopes slow and gradual.

Do not make sudden changes in speed or

direction, which could cause the machine to

rollover.

7. Use extra care while operating machines with

grass catchers or other attachments; they can

affect the stability of the unit. Do not use on

steeps slopes.

8. Do not try to stabilize the machine by putting your foot on the ground (ride-on units).

9. Do not mow near drop-offs, ditches, or

embankments. The mower could suddenly turn

over if a wheel is over the edge of a cliff or ditch, or

if an edge caves in.

10. Do not use grass catchers on steep slopes.

11. Do not mow slopes if you cannot back up them.

12. See your authorized dealer/retailer for recommendations of wheel weights or

counterweights to improve stability.

13. Remove obstacles such as rocks, tree limbs, etc.

14. Use slow speed. Tires may lose traction on slopes even though the brakes are functioning properly.

15. Do not turn on slopes unless necessary, and then,

turn slowly and gradually uphill, if possible. Never

mow down slopes.

AWARNING

Do not use this machine on slopes greater than 15o.*

Select slow ground speed before driving onto slope. Use extra caution when operating on slopes with rear-mounted grass catchers.

Mow across the face of slopes, not up and

down,use caution when changing directions and DO NOT START OR STOP ON SLOPE.

TOWED EQUIPMENT (RIDE-ON UNITS)

1. Tow only with a machine that has a hitch designed for towing. Do not attach towed equipment except at the hitch point.

2. Follow the manufacturer's recommendations for weight limit for towed equipment and towing on

slopes. See attaching a trailer under OPERATION.

3. Never allow children or others in or on towed equipment.

4. On slopes, the weight of the towed equipment may cause loss of traction and loss of control.

5. Travel slowly and allow extra distance to stop.

6. Do not shift to neutral and coast down hill.

CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the unit and the mowing activity. Never assume that children will remain where you last saw them.

1. Keep children out of the mowing area and under the watchful care of another responsible adult.

2. Be alert and turn unit off if children enter the area.

3. Before and during reverse operation, look behind and down for small children.

4. Never carry children, even with the blade(s) off. They may fall off and be seriously injured or

interfere with safe unit operation. Children who have been given rides in the past may suddenly

appear in the mowing area for another ride and be

run over or backed over by the machine.

5. Never allow children to operate the unit.

6. Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure

vision.

EMISSIONS

1. Engine exhaust from this product contains chemicals known, in certain quantities, to cause

cancer, birth defects, or other reproductive harm.

2. Look for the relevant Emissions Durability Period and Air Index information on the engine emissions

label.

IGNITION SYSTEM

1. This spark ignition system complies with Canadian ICES-O02.

*This limit was determined per CEN Standard EN 836:1997, Section 5.2.2 and is based on the EN 836 Stability Test procedure

described in Section 4.2.4.2. The 15 degree "limit of stability" is equal to 50% of the angle at which machine lift-off occurred in static

tests. Actual dynamic stability may vary depending on operating conditions.

6 www.simplicitymfg.com [ www.snapper.com

SafetyRules&information

SERVICE AND MAINTENANCE

Safe Handling of Gasoline

1. Extinguish all cigarettes, cigars, pipes, and other sources of ignition.

2. Use only approved gasoline containers.

3. Never remove the gas cap or add fuel with the engine running. Allow the engine to cool before

refueling.

4. Never fuel the machine indoors.

5. Never store the machine or fuel container where

there is an open flame, spark, or pilot light such as

near a water heater or other appliance.

6. Never fill containers inside a vehicle or on a truck bed with a plastic bed liner. Always place

containers on the ground away from your vehicle

before filling.

7. Remove gas-powered equipment from the truck or

trailer and refuel it on the ground. If this is not

possible, then refuel such equipment on a trailer

with a portable container, rather than from a

gasoline dispenser nozzle.

8. Keep nozzle in contact with the rim of the fuel tank

or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

9. If fuel is spilled on clothing, change clothing immediately.

10. Never over-fill the fuel tank. Replace gas cap and tighten securely.

11. Use extra care in handling gasoline and other fuels. They are flammable and vapors are

explosive.

12. If fuel is spilled, do not attempt to start the engine

but move the machine away from the area of spillage and avoid creating any source of ignition

until fuel vapors have dissipated.

13. Replace all fuel tank caps and fuel container caps

securely.

Service & Maintenance

1. Never run the unit in an enclosed area where carbon monoxide fumes may collect.

2. Keep nuts and bolts, especially blade attachment bolts, tight and keep equipment in good condition.

3. Never tamper with safety devices. Check their proper operation regularly and make necessary

repairs if they are not functioning properly.

4. Keep unit free of grass, leaves, or other debris build-up. Clean up oil or fuel spillage, and remove

any fuel-soaked debris. Allow machine to cool

before storage.

5. If you strike an object, stop and inspect the machine. Repair, if necessary, before restarting.

6. Never make adjustments or repairs with the engine running.

7. Check grass catcher components and the

discharge guard frequently and replace with

manufacturer's recommended parts, when necessary.

8. Mower blades are sharp. Wrap the blade or wear gloves, and use extra caution when servicing them.

9. Check brake operation frequently. Adjust and service as required.

10. Maintain or replace safety and instructions labels, as necessary.

11. Do not remove the fuel filter when the engine is hot as spilled gasoline may ignite. Do not spread fuel

line clamps further than necessary. Ensure clamps

grip hoses firmly over the filter after installation.

12. Do not use gasoline containing METHANOL, gasohol containing more than 10% ETHANOL, gasoline additives, or white gas because

engine/fuel system damage could result.

13. If the fuel tank must be drained, it should be drained outdoors.

14. Replace faulty silencers/mufflers.

15. Maintain or replace safety and instruction labels as

necessary.

16. Use only factory authorized replacement parts when making repairs.

17.Always comply with factory specifications on all settings and adjustments.

18.Only authorized service locations should be

utilized for major service and repair requirements.

19. Never attempt to make major repairs on this unit

unless you have been properly trained. Improper service procedures can result in hazardous operation, equipment damage and voiding of

manufacturer's warranty.

20. On multiple blade mowers, take care as rotating one blade can cause other blades to rotate.

21. Do not change engine governor settings or over- speed the engine. Operating the engine at excessive speed can increase the hazard of

personal injury.

22. Disengage drive attachments, stop the engine,

remove the key, and disconnect the spark plug

wire(s) before: clearing attachment blockages and chutes, performing service work, striking an object, or if the unit vibrates abnormally. After striking an

object, inspect the machine for damage and make

repairs before restarting and operating the

equipment.

23. Never place hands near the moving parts, such as a hydro pump cooling fan, when the tractor is

running. (Hydro pump cooling fans are typically located on top of the transaxle).

24. Units with hydraulic pumps, hoses, or motors: WARNING: Hydraulic fluid escaping under pressure may have sufficient force to penetrate

skin and cause serious injury. If foreign fluid is

injected into the skin it must be surgically removed within a few hours by a doctor familiar with this form of injury or gangrene may result. Keep body

and hands away from pin holes or nozzles that eject hydraulic fluid under high pressure. Use

paper or cardboard, and not hands, to search for

leaks. Make sure all hydraulic fluid connections are tight and all hydraulic hoses and lines are in good condition before applying pressure to the

system. If leaks occur, have the unit serviced

immediately by your authorized dealer.

25. WARNING: Stored energy device. Improper release of springs can result in serious personal

injury. Springs should be removed by an

authorized technician.

26. Models equipped with an engine radiator:

WARNING: Stored energy device. To prevent serious bodily injury from hot coolant or steam blow-out, never attempt to remove the radiator cap

while the engine is running. Stop the engine and wait until it is cool. Even then, use extreme care

when removing the cap.

IdentificationNumbers

North

i!!! llli!HilmHM

ORIGGO & $TRATTON OOR_ POWER PRODUCTS GROUP, LLC

MILW&UKEE, W1532O1 US&

When contacting your authorized dealer for replacement parts, service, or information you

MUST have these numbers.

Record your model name/number, manufacturer's identification numbers, and engine serial numbers in

the space provided for easy access. These numbers

can be found in the locations shown.

American / CE Models

CE Models (Only)

ID Tag

Mower ID Tag

NOTE: For location of engine identification numbers, refer to the engine owner's manual

CE Models: Place the extra copy of the identification

tag in the manual

CE IDENTIFICATION TAG MARKINGS

A. Manufacturer's Identification Number B. Product Description

C. Serial Number D. Manufacturer's Address

E. CE Compliance Logo

E Year of Manufacture

G. Maximum Engine Speed in Rotations per Minute

H. Power Rating in Kilowatts

I. Mass of Unit in Kilograms

J. Sound Power in Decibels *

This unit complies with European Harmonized Lawn Mower

Standard EN 836, European Machinery Directive 98/37/EC, and European EMC Directive 2004/108/EEC

* Tested according to 2000/14/EC

8 www.simplicitymfg.com I www.snapper.com

SAFETY DECALS

This unit has been designed and manufactured to provide you with the safety and reliability you would expect from an industry leader in outdoor power equipment manufacturing.

Although reading this manual and the safety instructions it contains will provide you with the

necessary basic knowledge to operate this equipment safely and effectively, we have placed several safety labels on the unit to remind you of this important

information while you are operating your unit. All DANGER, WARNING, CAUTION and

instructional messages on your rider and mower should be carefully read and obeyed. Personal bodily injury can result when these instructions are not

followed. The information is for your safety and it is

important! The safety decals below are on your rider and mower.

If any of these decals are lost or damaged, replace

them at once. See your local dealer for replacements.

These labels are easily applied and will act as a constant visual reminder to you, and others who may use the equipment, to follow the safety instructions necessary for safe, effective operation.

SafetyDecals

NORTH AMERICAN MODELS

AMP..,T.0,.,Z,R0\

_AMPUTATi0R ANDTHROWN/

OBJECTSHAZARD

Te avoid injury from rotating blades,

/otT_ clear of dock edge end keep ethers/

/ away. Do net mew without discha_Je _/

Z chute er entire grass catcher in place.

CE EXPORT MODELS

SafetyInterlockSystem

NORTH AMERICAN MODELS ONLY:

SAFETY INTERLOCK SYSTEM

This unit is equipped with safety interlock switches. These safety systems are present for your safety, do not attempt to bypass safety switches, and never

tamper with safety devices. Check their operation

regularly.

Operational SAFETY Checks

Test I -- Engine should NOT crank if:

• PTO switch is engaged, OR

• Parking brake is not engaged, OR

• Ground speed control levers are not in the NEUTRAL position.

Test 2 -- Engine SHOULD crank and start if:

• PTO switch is NOT engaged, AND

• Parking brake is engaged, AND

• Ground speed control levers are locked in the NEUTRAL position.

Test 3 -- Engine should SHUT OFF if:

• Operator rises off seat with PTO engaged, OR

• Operator rises off seat with parking brake

disengaged.

• Operator moves ground speed control levers out

of their neutral positions before disengaging

parking brake.

Test 4 -- Blade Brake Check Mower blades and mower drive belt should come to a

complete stop within five (5) seconds after electric PTO switch is turned off (or operator rises off seat). If mower drive belt does not stop within five (5) seconds, see your dealer.

EXPORT MODELS ONLY:

SAFETY INTERLOCK SYSTEM

This unit is equipped with safety interlock switches. These safety systems are present for your safety, do not attempt to bypass safety switches, and never tamper with safety devices. Check their operation regularly.

Operational SAFETY Checks

Test 1 -- Engine should NOT crank if:

• PTO switch is engaged, OR

• Parking brake is not engaged, OR

• Ground speed control levers are not in the NEUTRAL position.

Test 2 -- Engine SHOULD crank and start if:

• PTO switch is NOT engaged, AND

• Parking brake is engaged, AND

• Ground speed control levers are locked in the NEUTRAL position, AND

• Operator is in seat.

Test 3 -- Engine should SHUT OFF if:

• Operator rises off seat under any condition.

• Operator moves ground speed control levers out

of their neutral positions before disengaging

parking brake. Test 4 -- Blade Brake Check Mower blades and mower drive belt should come to a

complete stop withinfive (5) seconds after electric

PTO switch is turned off (or operator rises off seat). If mower drive belt does not stop within five (5) seconds, see your dealer.

NOTE: Once the engine has stopped, PTO switch must be turned off, parking brake must be engaged, and the ground speed control levers must be locked in the NEUTRAL position after the operator returns to the seat in order to start the engine.

NOTE: Once the engine has stopped, PTO switch must be turned off, parking brake must be engaged, and the ground speed control levers must be locked in

the NEUTRAL position after the operator returns to

the seat in order to start the engine.

AWARNING

If the unit does not pass a safety test, do not operate it. See your authorized dealer. Under no circumstance should you attempt to defeat the purpose of the safety interlock system.

10 www.simplicitymfg.com [ www.snapper.com

If the unit does not pass a safety test, do not operate it. See your authorized dealer. Under no circumstance should you attempt to defeat the purpose of the safety interlock system.

Safetyicons

Safety Icons

The alert symbol ,d_ is used to identity safety information about hazards that can result in personal

injury. A signal word (DANGER, WARNING, or CAUTION) is used with the alert symbol to indicate

the likelihood and the potential severity of the injury.

In addition, a hazard icon may be used to represent

the type of hazard. An explanation of hazard levels

and icons are as follows:

A DANGER

This indicates a hazard which, if not avoided, will

result in serious injury or death.

WARNING

This indicates a hazard which, if not avoided, could

result in serial injury or death.

A CAUTION

This indicates a hazard which, if not avoided, might

result in minor or moderate injury.

CAUTION or NOTICE

These messages presented without the alert symbol indicate a situation where the unit or property could be damaged.

NORTH AMERICAN SAFETY ICONS

Hazard

Alert

Toxic Fumes

Read the Manual

Open flame hazard

Fire Hazard

Amputation

Rotating Parts

Amputation

Hand in Blade

Rollover Hazard

Safety Icon

Hazard

Amputation

Foot in Blade

Thrown

Objects

Maintain a safe distance

Keep children

away Hot

surface

Wear

Protective Gear

Pinch Point

Overhead Obstacles

Safety Icon

CE EXPORT SAFETY ICONS

Warning: Read Operator's Manual.

Read and understand the

Operator's Manual before using this machine.

Danger: Thrown Objects. This machine is capable of _ [_i

objects and debris. Keep bystanders away.

Warning: Remove Key Before

Servicing.

Remove the key and consult

technical literature before

performing repairs or maintenance. Danger: Machine Rollover.

Operating on steep slopes can cause sliding and loss of steering,

control and rollover. Do not use this machine on slopes greater than 15°. This limit

was determined per CEN Standard EN 836:1997, Section 5.2.2 and is based on the EN 836 Stability Test procedure described in Section 4.2.4.2. The 15 degree "limit of stability" is equal to 50% of the angle

at which machine lift-off occurred in static tests. Actual dynamic stability may vary depending on operating

conditions.

Danger: Machine Rollover.

Do not operate on any slopes when wet or slippery. Do not operate near drop-offs or near water.

Danger: Dismemberment.

This machine can amputate limbs. Keep bystanders and children away when engine is running.

Danger: Dismemberment.

This mower deck can amputate limbs. Keep hands and feet away

from blades.

Danger: Dismemberment.

This machine can crush and cut. Keep hands away from belts and

pulleys. Danger: Carbon Monoxide

Poisoning. Do not operate the engine in an

unventilated area.

Danger: Fire Hazard. Keep unit free of grass, leaves and

excess oil. Do not add fuel while engine is hot or running. Stop

engine and allow to cool for at least 3 minutes prior to adding fuel. Do not add fuel indoors, in an enclosed trailer, garage or other enclosed areas. Clean up spilled fuel. Do not smoke while operating this

machine.

Warning: Hot Surface

Avoid contact with engine and hot surfaces. Wait for unit to cool before

touching.

throwing :..... _ i

Features& Controls

CONTROL FUNCTIONS

The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing require the combined use of several controls appfied in specific sequences. To learn what combination and sequence of controls to use for various tasks see the OPERATION section.

Ground Speed Control Levers

These levers control the ground speed of the rider. The left lever controls the left rear drive wheel and the

right controls the right rear drive wheel. Moving a lever forward increases the FORWARD

speed of the associated wheel, and pulling back on a lever increases the REVERSE speed.

The further a lever is moved away from the neutral position the faster the drive wheel will turn.

See the OPERATION section for steering instructions.

_ Throttle Control

The throttle controls engine speed. Move the throttle

forward to increase engine speed and back to

decrease engine speed. Always operate at FULL

throttle.

Choke

Close the choke for cold starting. Open the choke once the engine starts. A warm engine may not require choking. Move the lever forward to close the choke. Move the lever back to open the choke.

_ Ignition Switch

The ignition switch starts and stops the engine; it has three positions:

_OFF

_RUN

_ START Cranks the engine for starting.

NOTE: Never leave the ignition switch in the RUN position with the engine stopped-this drains the battery.

Stops the engine and shuts off the electrical system.

Allows the engine to run and powers the electrical system.

12 www.simplicitymfg.com I www.snapper.com

+ 31 hidden pages