Rev. 09/2002
TP 400-3545-00-AT-SMA
ATTACHMENT
I
LLUSTRATED
P
ARTS L
IST
© Copyright 2002 Simplicity Manufacturing, Inc.All Rights Reserved.
MANUFACTURING, INC.
500 N Spring Street / PO Box 997
Port Washington, WI 53074-0997 USA
www.simplicitymfg.com
A
TTACHMENT
Mfg. No. Description
1694305 Turbo Mounting Kit 38” Mower
2
TP 400-3545-00-AT-SMA
© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.
Turbo Mounting Kit - 38”Mower
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
986209
Existing
Hardware
Existing
Pulley & Nut
Old Broadmoor Series
New Broadmoor Series
Torque to
55-70 ft. lbs.
Existing
Washer
Pulley & Nut
1
2
5
6
7
8
36
9
10
11
12
13
1414
15
16
17
14
18
19
20
21
22
24
23
11
12
25
26
27
28
29
30
31
32
33
12
11
34
35
4
3
The above parts group applies to the following Mfg. Nos.:
1694305 Turbo Mounting Kit - 38” Mower
3
TP 400-3545-00-AT-SMA
Turbo Mounting Kit - 38”Mower
1 1705141 1 V-BELT, Old Broadmoor Series (Short)
1 1724372 1 V-BELT, New Broadmoor Series (Long)
2 1704983 1 MOUNTING BRACKET
3 1960520 1 PAL NUT, 5/8
4 1931333 2 CARRIAGE BOLT, 5/16-18 x 3/4
5 1722546 1 PIVOT ASSEMBLY
6 1931277 2 NUT, Hex, Flange, Whizlock, 5/16-18
7 1960404 4 CAPSCREW, Truss Head, #10-24 x 3/4
8 1933896 4 NUT, Nylock, #10-24
9 1718295 1 ROD, Deflector
10 1704789 1 BELT GUIDE, Turbo
11 1917372 4 NUT, Hex, 5/16-18
12 1917356 4 LOCKWASHER, 5/16
13 1921971 1 CAPSCREW, Hex Head, 3/8-16 x 1-1/4
14 1924940 2 WASHER, Flat, 3/8
15 1714817 1 IDLER PULLEY
16 1704768 1 BRACKET, Idler
17 172845 1 BELT STOP
18 1916965 1 LOCKWASHER, 3/8
19 1916950 1 NUT, Hex, 3/8-16
20 1713621 1 SPACER, Short, Splined
21 1713091 1 PULLEY ASSEMBLY
22 1713624 1 SPACER, Long
23 1679163 1 NUT, Wing, 5/16
24 1923362 1 NUT, Hex, Center Lock, 5/16-18
25 1924856 2 CAPSCREW, Taptite, 5/16-18 x 1/2
26 1724370 1 BRACE
27 1705064 1 SPRING LATCH
28 1919381 1 WASHER, Flat
29 1960318 1 CAPSCREW, Hex Head, 5/16-18 x 2-1/2
30 1960223 1 CARRIAGE BOLT, 5/16-18 x 1-1/4
31 1704881 1 BRACKET ASSEMBLY
32 1666294 1 SPACER
33 1705308 1 BRACKET, "L"
34 1930600 2 CAPSCREW, Hex Head Taptite, 5/16-18 x 1-1/2
35 1713540 1 ROLLER
36 1724371 1 DEFLECTOR
REF NO. PART NO. QTY. DESCRIPTION
Footnotes:
The above parts group applies to the following Mfg. Nos.:
1694305 Turbo Mounting Kit - 38” Mower
Torque Specification Chart
FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
Hardware
Grade
SAE Grade 2 SAE Grade 5 SAE Grade 8
Size Of
in/lbs in/lbs
in/lbs
Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.
8-32
19
2.1
30
3.4
41
4.6
8-36
20
2.3
31
3.5
43
4.9
10-24
27
3.1
43
4.9
60
6.8
10-32
31
3.5
49
5.5
68
7.7
1/4-20
66
7.6 8 10.9 12 16.3
1/4-28
76
8.6 10 13.6 14 19.0
5/16-18 11 15.0 17 23.1 25 34.0
5/16-24 12 16.3 19 25.8 27 34.0
3/8-16 20 27.2 30 40.8 45 61.2
3/8-24 23 31.3 35 47.6 50 68.0
7/16-14 30 40.8 50 68.0 70 95.2
7/16-20 35 47.6 55 74.8 80 108.8
1/2-13 50 68.0 75 102.0 110 149.6
1/2-20 55 74.8 90 122.4 120 163.2
9/16-12 65 88.4 110 149.6 150 204.0
9/16-18 75 102.0 120 163.2 170 231.2
5/8-11 90 122.4 150 204.0 220 299.2
5/8-18 100 136 180 244.8 240 326.4
3/4-10 160 217.6 260 353.6 386 525.0
3/4-16 180 244.8 300 408.0 420 571.2
7/8-9 140 190.4 400 544.0 600 816.0
7/8-14 155 210.8 440 598.4 660 897.6
1-8 220 299.2 580 788.8 900 1,244.0
1-12 240 326.4 640 870.4 1,000 1,360.0
Hex Head Capscrew
Hex Nut
Lockwasher
Washer
Carriage Bolt
NOTES
1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
torques.
b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.
3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.
Hardware Identification & Torque Specifications
Common Hardware Types
Screw, 1/2 x 2
Body
Diameter
Body
Length
Inside
Diameter
Nut, 1/2”
No
Marks
3/8” Bolt or Nut
Wrench—9/16”
3/8
5/16” Bolt or Nut
Wrench—1/2”
5/16
1/4” Bolt or Nut
Wrench—7/16”
1/4
1/2” Bolt or Nut
Wrench—3/4”
1/2
DIA.
7/16
DIA.
7/16” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench (Nut)—11/16”
Wrench & Fastener Size Guide
Standard Hardware Sizing
When a washer or nut is identified as 1/2”, this is the
Nominal size
, meaning the
inside diameter
is 1/2 inch; if a
second number is present it represent the
threads per inch
When bolt or capscrew is identified as 1/2 - 16 x 2”, this
means the
Nominal size
, or
body diameter
is 1/2 inch; the
second number represents the
threads per inch
(16 in this
example, and the final number is the
body length
of the
bolt or screw (in this example 2 inches long).
The guides and ruler furnished below are designed to
help you select the appropriate hardware and tools.
0
1/4 3/4
1/2
1
1/4 3/4
1/2
2
1/4 3/4
1/2
3
1/4 3/4
1/2
4
Loading...