Snapper 3537 User Manual

Rev. 09/2002
TP 400-3537-00-AT-SMA
ATTACHMENT
ILLUSTRATED
PARTS LIST
© Copyright 2002 Simplicity Manufacturing, Inc.All Rights Reserved.
MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA
www.simplicitymfg.com
A
TTACHMENT
Mfg. No. Description
1694308 Catcher, Clean Sweep Twin
2
TP 400-3537-00-AT-SMA
© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.
Catcher, Clean Sweep Twin - Cover & Bag Group
NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
983952
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
11
8
41
The above parts group applies to the following Mfg. Nos.:
1694308 Catcher, Clean Sweep Twin
3
TP 400-3537-00-AT-SMA
Catcher, Clean Sweep Twin - Cover & Bag Group
1 1704615 1 TUBE ASSEMBLY, Support, (Incl. Ref. Nos. 2, 3, 4, 5, 6, 8, 9 & 11) 2 1960381 7 RIVET, Pop 3 1704075 1 SUPPORT, Tube 4 1704135 1 SEAL, Cover 5 1704508 3 BRACKET, Seal 6 1960399 1 SCREW, Round Head, #8-32 x 7/8 7 1930642 5 LOCKNUT, Flange, 1/4-20 8 1960096 2 WASHER
9 1704507 1 STRAP, Tube Support 10 1927428 2 CAPSCREW, Hex Head, Taptite, 1/4-20 x 3/8 11 1960077 2 NUT, Hex, Lock, #8-32 12 1960252 5 CARRIAGE BOLT, 1/4-20 x 5/8 13 1703822 1 CROSS ASSEMBLY. 14 1921966 4 CAPSCREW, Hex Head, 3/8-16 x 7/8 15 1928352 4 NUT, Hex, Whizlock, 3/8-16 16 1960221 2 CLIP, Hairpin 17 1703700 1 SCREEN 18 1917372 4 NUT, Hex, 5/16-18 19 1917356 4 LOCKWASHER, 5/16 20 1672023 2 CLAMP 21 1703807 2 HANGER 22 1931333 4 CARRIAGE BOLT, 5/16-18 x 3/4 23 1703855 2 HOOP, Bag 24 1703764 2 BAG, Grass 25 1675707 2 TUBE CLIP, Grass Bag 26 1704057 1 SEAL, Clip 27 1930531 2 SCREW, Truss Head, #10-32 x 1/2 28 1675043 4 RIVET, Pop 29 1703853 1 HANDLE, Latch 30 1928919 2 NUT, Hex, #10-32 31 960367 2 PIN, Round Head 32 1910531 4 WASHER 33 1667248 6 CLIP, Canoe 34 1704405 1 DECAL, Safety 35 * 1 COVER 36 1704180 2 WINDOW 37 1933886 1 NUT, Speed 38 1705876 1 CABLE, Double Loop 39 1921319 1 WASHER, 1/4 40 1960400 1 CAPSCREW, Hex Head, Self-tapping, #10-12 x 5/8 41 1704056 1 COVER ASSEMBLY (Incl. Ref. Nos. 17, 26, 28, 32, 37, 38, 39 & 40)
REF NO. PART NO. QTY. DESCRIPTION
Footnotes:
* Not sold separatly.
The above parts group applies to the following Mfg. Nos.:
1694308 Catcher, Clean Sweep Twin
4
TP 400-3537-00-AT-SMA
© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.
Catcher, Clean Sweep Twin - Hitch Group - 1694000 and Below
NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
984011
The above parts group applies to the following Mfg. Nos.:
1694308 Catcher, Clean Sweep Twin
5
TP 400-3537-00-AT-SMA
Catcher, Clean Sweep Twin - Hitch Group - 1694000 and Below
1 1703745 1 SUPPORT, Upright
2 1920415 2 CAPSCREW, Hex, Head, 3/8-16 x 1-1/4
3 102004 1 PIN, Round Head
4 1703744 1 BRACKET, Lower Hitch
5 1924940 8 WASHER
6 1921210 4 CAPSCREW, Hex Head, 3/8-16 x 1
7 1916965 10 LOCKWASHER, Spring, 3/8
8 1916950 10 NUT, Hex, 318-16
9 1703743 2 SUPPORT, Side Hitch 10 1921971 4 CAPSCREW, Hex Head, 3/8-16 x 1-3/4 11 176012 1 CLIP, Safety Pin 12 1665699 4 SPACER 13 1919384 4 WASHER
REF NO. PART NO. QTY. DESCRIPTION
Footnotes:
The above parts group applies to the following Mfg. Nos.:
1694308 Catcher, Clean Sweep Twin
6
TP 400-3537-00-AT-SMA
© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.
Catcher, Clean Sweep Twin - Hitch Group - 1694000 and Above
NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
986205
3
6
2
5
12
4
5
2
8
9
10
11
11
6
7
5
6
5
1
4
2
5
6
The above parts group applies to the following Mfg. Nos.:
1694308 Catcher, Clean Sweep Twin
7
TP 400-3537-00-AT-SMA
Catcher, Clean Sweep Twin - Hitch Group - 1694000 and Above
1 1724649 1 SUPPORT, Upright
2 1921210 6 CAPSCREW, Hex Head, 3/8-16 x 1
3 1703744 1 BRACKET, Lower Hitch
4 1723067 2 SUPPORT, Side Hitch
5 1916965 6 LOCKWASHER, 3/8
6 1916950 6 NUT, Hex, 3/8-16
7 1920415 2 CAPSCREW, Hex Head, 3/8-16 x 1-1/4
8 1960355 4 LOCKNUT, Hex, 1/2-13
9 1960462 4 CAPSCREW, Hex Head, 1/2-13 x 2-1/2 10 1668662 4 SPACER 11 1924361 4 WASHER 12 1723044 2 PLATE SIDE
REF NO. PART NO. QTY. DESCRIPTION
Footnotes:
The above parts group applies to the following Mfg. Nos.:
1694308 Catcher, Clean Sweep Twin
8
TP 400-3537-00-AT-SMA
© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.
Catcher, Clean Sweep Twin - Adapter & Blade Group
NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
986206
1
21
22
2
3
4
9
5
6
20
19
17
18
14
13
14
13
15
16
10
12
11
7
8
6
9
13
14
The above parts group applies to the following Mfg. Nos.:
1694308 Catcher, Clean Sweep Twin
9
TP 400-3537-00-AT-SMA
Catcher, Clean Sweep Twin - Adapter & Blade Group
1 1703769 1 TUBE, Transfer
2 1704603 1 LATCH, Tube
3 1960185 1 WASHER, 5/16
4 1935048 1 NUT, Flange Lock, 5/16-18
5 1704341 1 WASHER, Special
6 1919438 3 NUT, ESNA, Hex Lock, 5/16-18
7 1705010 1 ADAPTER, Blade, High Lift
8 1704977 1 BLADE, High Lift, 38” Mower
9 1960371 3 CAPSCREW, Hex Head, 5/16-18 x 3/4 10 1931338 2 CARRIAGE BOLT, 5/16-18 x 1-3/4 11 1931332 1 CARRIAGE BOLT, 5/16-16 x 5/8 12 1703765 1 BAFFLE, 38” Mower 13 1917356 4 LOCKWASHER, 5/16 14 1917372 4 NUT, Hex, 5/16-18 15 1702665 2 SPACER 16 1960273 1 CARRIAGE BOLT, 5/16-18 x 2-1/4 17 1928698 1 NUT, Hex, Centerlock, 5/16-18 18 1679163 1 WING NUT ASSEMBLY 19 1704355 1 BRACKET 20 1703770 1 ADAPTER 21 1960122 1 CAPSCREW, Hex Head, 5/16-18 x 3/4 22 1919326 1 WASHER, 5/16
REF NO. PART NO. QTY. DESCRIPTION
Footnotes:
The above parts group applies to the following Mfg. Nos.:
1694308 Catcher, Clean Sweep Twin
Torque Specification Chart
FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
Hardware Grade
SAE Grade 2 SAE Grade 5 SAE Grade 8
Size Of
in/lbs in/lbs
in/lbs
Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.
8-32
19
2.1
30
3.4
41
4.6
8-36
20
2.3
31
3.5
43
4.9
10-24
27
3.1
43
4.9
60
6.8
10-32
31
3.5
49
5.5
68
7.7
1/4-20
66
7.6 8 10.9 12 16.3
1/4-28
76
8.6 10 13.6 14 19.0 5/16-18 11 15.0 17 23.1 25 34.0 5/16-24 12 16.3 19 25.8 27 34.0 3/8-16 20 27.2 30 40.8 45 61.2 3/8-24 23 31.3 35 47.6 50 68.0 7/16-14 30 40.8 50 68.0 70 95.2 7/16-20 35 47.6 55 74.8 80 108.8 1/2-13 50 68.0 75 102.0 110 149.6 1/2-20 55 74.8 90 122.4 120 163.2 9/16-12 65 88.4 110 149.6 150 204.0 9/16-18 75 102.0 120 163.2 170 231.2 5/8-11 90 122.4 150 204.0 220 299.2 5/8-18 100 136 180 244.8 240 326.4 3/4-10 160 217.6 260 353.6 386 525.0 3/4-16 180 244.8 300 408.0 420 571.2 7/8-9 140 190.4 400 544.0 600 816.0 7/8-14 155 210.8 440 598.4 660 897.6 1-8 220 299.2 580 788.8 900 1,244.0 1-12 240 326.4 640 870.4 1,000 1,360.0
Hex Head Capscrew
Hex Nut
Lockwasher
Washer
Carriage Bolt
NOTES
1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
torques.
b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.
3. Unless otherwise noted on assembly drawings, all torque values must meet this specification.
Hardware Identification & Torque Specifications
Common Hardware Types
Screw, 1/2 x 2
Body
Diameter
Body
Length
Inside Diameter
Nut, 1/2”
No
Marks
3/8” Bolt or Nut
Wrench—9/16”
3/8
5/16” Bolt or Nut
Wrench—1/2”
5/16
1/4” Bolt or Nut
Wrench—7/16”
1/4
1/2” Bolt or Nut
Wrench—3/4”
1/2
DIA.
7/16 DIA.
7/16” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench (Nut)—11/16”
Wrench & Fastener Size Guide
Standard Hardware Sizing
When a washer or nut is identified as 1/2”, this is the
Nominal size
, meaning the
inside diameter
is 1/2 inch; if a
second number is present it represent the
threads per inch
When bolt or capscrew is identified as 1/2 - 16 x 2”, this means the
Nominal size
, or
body diameter
is 1/2 inch; the
second number represents the
threads per inch
(16 in this
example, and the final number is the
body length
of the
bolt or screw (in this example 2 inches long).
The guides and ruler furnished below are designed to help you select the appropriate hardware and tools.
0
1/4 3/4
1/2
1
1/4 3/4
1/2
2
1/4 3/4
1/2
3
1/4 3/4
1/2
4
Loading...