Snapper 2690628, 2690629 User Manual
0
ATO
A
UAL
GT600 Series
27HP Hydro Tractors & Mower Decks
2690628 STGT2754D, 27HPD, 4WD, 3P
2690629 STGT2754D, 27HPD, 4WD, 3P
2690626 STGT2754D, 27HPD, 4WD, 3P & 54" Mower
2690627 STGT2754D, 27HPD, 4WD, 3P & 54" Mower
54" Mower Decks
Mfg. No. Description
1695197 54" Mower Deck
1695198 54" Mower Deck
1733761
Revision 02
Rev. Date 11/2007
TP 100-4427-02-XL-N
[ableofContents
Safety Rules & information ................................. 2
identification Numbers ........................................ 7
Safety Decals ....................................................... 8
Safety icons ......................................................... 9
Safety Interlock System ...................................... 9
Features & Controls .......................................... 10
Control Functions .................................................. 10
Parking Brake Function ......................................... 12
Automatic Controlled Traction ............................... 12
Dashboard Display Functions ............................... 13
Operating the Tractor ........................................ 14
General Operating Safety ..................................... 14
Slope Operation .................................................... 14
Adding Fuel ........................................................... 14
Starting the Engine ............................................... 14
Stopping the Tractor & Engine .............................. 15
Driving the Tractor ................................................ 15
Mowing .................................................................. 15
Mowing in Reverse ............................................... 15
Attachment Operation in Reverse ......................... 15
4-Wheel Drive Operation ...................................... 15
Pushing the Tractor by Hand ................................ 16
Hydraulic System Functions ................................. 16
Optional 3-Point Hitch Operation .......................... 18
540 Rear PTO Operation ...................................... 20
Mower Deck Removal & Installation ..................... 22
Attaching a Trailer ................................................. 24
Storage ................................................................. 24
12 Power Outlet .................................................... 24
Regular Maintenance ........................................ 25
Maintenance Schedule ......................................... 25
Engine Maintenance ............................................. 26
Clean Debris Out of Engine Compartment ........... 26
Clean Engine Oil Cooler or Radiator ..................... 26
Clean Transmission Oil Cooler ............................. 26
Check Engine Coolant Level ................................. 26
Change Engine Coolant ........................................ 27
Change Fuel Filter ................................................ 27
Drain Fuel Separator ............................................. 28
Check Transmission Oil Level .............................. 28
Change Transmission Oil and Filter ...................... 29
Check Front Axle Oil Level ................................... 29
Check Mower Deck Gear Box Oil ......................... 30
Safety Interlock System Check ............................. 30
Blade Brake Check ............................................... 30
Check Tire Pressures ........................................... 31
Battery Maintenance ............................................. 31
Lubrication ............................................................ 32
Servicing the Mower Blades ................................. 34
Troubleshooting, Adjustment & Service ......... 36
Troubleshooting the Tractor .................................. 36
Troubleshooting the Mower .................................. 37
Seat Adjustment .................................................... 38
Brake Adjustment .................................................. 38
Headlight Replacement ......................................... 39
Taillight & Dash Light Replacement ...................... 39
Battery Charging ................................................... 39
Mower Adjustments .............................................. 40
Gauge Wheel Adjustment ............................. 40
Leveling the Mower ....................................... 41
Mower Belt Replacement ...................................... 42
Arbor Drive Belt ............................................. 42
Specifications .................................................... 43
Parts & Accessories .......................................... 44
Lawn Care & Mowing information ............. LC--1
NOTE: In this manual, "left" and "right" are referred to as
seen from the operating position.
SafetyRules& information
OporatingSafety
Congratulations on purchasing a superior-quality piece of lawn and
garden equipment. Our products are designed and manufactured to
meet or exceed all industry standards for safety.
Power equipment is only as safe as the operator. If it is misused, or
not properly maintained, it can be dangerous! Remember, you are
responsible for your safety and that of those around you.
Use common sense, and think through what you are doing. If you
are not sure that the task you are about to perform can be safely
done with the equipment you have chosen, ask a
professional: contact your local authorized dealer.
ReadtheManual
The operator's manual contains important safety information you need to be aware of
BEFORE you operate your unit as well as DURING operation.
Safe operating techniques, an explanation of the product's features and
controls, and maintenance information is included to help you get the
most out of your equipment investment.
Be sure to completely read the Safety Rules and Information found on
the following pages. Also completely read the Operation section.
Children
Tragic accidents can occur with children. Do not allow
them anywhere near the area of operation. Children are
often attracted to the unit and mowing activity. Never
assume that children will remain where you last saw them.
If there is a risk that children may enter the area where you
are mowing, have another responsible adult watch them.
DO NOT GIVE CHILDREN RIDES ON THIS UNIT! This
encourages them to come near the unit in the future while it
is running, and they could be seriously hurt. They may then
approach the unit for a ride when you are not expecting it,
and you may run over them.
TP 600-2459-08-UV-SMA
RBVBPS6
Do not mow in reverse unless
absolutely necessary. Always look
down and behind before and
while traveling in reverse
even with the mower
blades disengaged.
SafetyRulesandlflformtiefl,
Slope8peratiofl
You could be seriously injured or even killed if you use this unit on too
steep an incline. Using the unit on a slope that is too steep or where
you don't have adequate traction can cause you to lose control or roll
over.
A good rule of thumb is to not operate on any slope you cannot back up
(in 2-wheel drive mode). You should not operate on inclines with a
slope greater than a 3.5 foot rise over a 20 foot length. Always drive up
and down slopes: never cross the face.
Also note that the surface you are driving on can greatly impact stability
and control. Wet grass or icy pavement can seriously affect your ability
to control the unit.
If you feel unsure about operating the unit on an incline, don't do it. It's
not worth the risk.
Meving
This equipment has many moving parts that can injure you or someone else.
However, if you are seated in the seat properly, and follow all the rules in this
book, the unit is safe to operate.
The mower deck has spinning mower blades that can amputate hands and feet.
Do not allow anyone near the equipment while it is running!
To help you, the operator, use this equipment safely, it is equipped with an
operator-present safety system. Do NOT attempt to alter or bypass the system.
See your dealer immediately ifthe system does not pass all the safety interlock
system tests found in this manual.
Thrown ects
This unit has spinning mower blades. These blades can pick up and throw
debris that could seriously injure a bystander. Be sure to clean up the area to
be mowed BEFORE you start mowing.
Do not operate this unit without the entire grass catcher or discharge guard
(deflector) in place.
Also, do not allow anyone in the area while the unit is running! If someone
does enter the area, shut the unit off immediately until they leave.
FuelandMaintenance
Gasoline is extremely flammable. Its vapors are also extremely flammable
and can travel to distant ignition sources. Gasoline must only be used as a
fuel, not as a solvent or cleaner. It should never be stored any place where
its vapors can build up or travel to an ignition source like a pilot light. Fuel
belongs in an approved, plastic, sealed gas can, or in the tractor fuel tank
with the cap securely closed. Spilled fuel needs to be cleaned up immedi-
ately.
Proper maintenance is critical to the safety and performance of your unit.
Be sure to perform the maintenance procedures listed in this manual, espe-
cially periodically testing the safety system.
3
SafetyRuJes& lflfomatJofl
Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control
of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment.
This mowing deck is capable of amputating hands and feet and throwing objects.
The triangle _, in text signifies important cautions or warnings which must be followed.
GENERAL OPERATION
1. Read, understand, and follow all instructions in the
manual and on the unit before starting.
2. Do not put hands or feet near rotating parts or under
the machine. Keep clear of the discharge opening at
all times.
3. Only allow responsible adults, who are familiar with
the instructions, to operate the unit (local regulations
can restrict operator age).
4. Clear the area of objects such as rocks, toys, wire,
etc., which could be picked up and thrown by the
blade(s).
5. Be sure the area is clear of other people before mow-
ing. Stop the unit if anyone enters the area.
6. Never carry passengers.
7. Do not mow in reverse unless absolutely necessary.
Always look down and behind before and while travel-
ling in reverse.
8. Never direct discharge material toward anyone.
Avoid discharging material against a wall or obstruc-
tion. Material may ricochet back toward the operator.
Stop the blade(s) when crossing gravel surfaces.
9. Do not operate the machine without the entire grass
catcher, discharge guard (deflector), or other safety
devices in place.
10. Slow down before turning.
11. Never leave a running unit unattended. Always disen-
gage the PTO, set parking brake, stop engine, and
remove keys before dismounting.
12. Disengage blades (PTO) when not mowing. Shut off
engine and wait for all parts to come to a complete
stop before cleaning the machine, removing the grass
catcher, or unclogging the discharge guard.
13. Operate the machine only in daylight or good artificial
light.
14. Do not operate the unit while under the influence of
alcohol or drugs.
15 Watch for traffic when operating near or crossing
roadways.
16. Use extra care when loading or unloading the unit
into a trailer or truck.
17.Always wear eye protection when operating this unit.
18. Data indicates that operators, age 60 years and
above, are involved in a large percentage of power
equipment-related injuries. These operators should
evaluate their ability to operate the equipment safely
enough to protect themselves and others from injury.
19. Follow the manufacturer's recommendations for
wheel weights or counterweights.
20. Keep in mind the operator is responsible for accidents
occurring to other people or property.
21. All drivers should seek and obtain professional and
practical instruction.
22. Always wear substantial footwear and trousers.
Never operate when barefoot or wearing sandals.
23. Before using, always visually check that the blades
and blade hardware are present, intact, and secure.
Replace worn or damaged parts.
24. Disengage attachments before: refueling, removing
an attachment, making adjustments (unless the
adjustment can be made from the operator's posi-
tion).
25. When the machine is parked, stored, or left unattend-
ed, lower the cutting means unless a positive
mechanical lock is used.
26. Before leaving the operator's position for any reason,
engage the parking brake (if equipped), disengage
the PTO, stop the engine, and remove the key.
27. To reduce fire hazard, keep the unit free of grass,
leaves, & excess oil. Do not stop or park over dry
leaves, grass, or combustible materials.
28. It is a violation of California Public Resource Code
Section 4442 to use or operate the engine on or near
any forest-covered, brush-covered, or grass-covered
land unless the exhaust system is equipped with a
spark arrester meeting any applicable local or state
laws. Other states or federal areas may have similar
laws.
TRANSPORTING AND STORAGE
1. When transporting the unit on an open trailer, make
sure it isfacing forward, in the direction of travel, if
the unit is facing backwards, wind lift could damage
the unit.
2. Always observe safe refueling and fuel handling prac-
tices when refueling the unit after transportation or
storage.
3. Never store the unit (with fuel) inan enclosed poorly
ventilated structure. Fuel vapors can travel to an
ignition source (such as a furnace, water heater, etc.)
and cause an explosion. Fuel vapor is also toxic to
humans and animals.
4. Always follow the engine manual instructions for
storage preparations before storing the unit for both
short and long term periods.
5. Always follow the engine manual instructions for
proper start-up procedures when returning the unit to
service.
6. Never store the unit or fuel container inside where
there is an open flame or pilot light, such as in a
water heater. Allow unit to cool before storing.
SafetyRulesandinformation
SLOPE OPERATION
Slopes are a major factor related to loss-of-control and tip-
over accidents, which can result in severe injury or death.
Operation on all slopes requires extra caution. If you can-
not back up the slope or ifyou feel uneasy on it, do not
operate on it.
Control of a walk-behind or ride-on machine sliding on a
slope will not be regained by the application of the brake.
The main reasons for loss of control are: insufficient tire
grip on the ground, speed too fast, inadequate braking, the
type of machine is unsuitable for its task, lack of awareness
of the ground conditions, incorrect hitching and load distrib-
ution.
1. Mow up and down slopes, not across.
2. Watch for holes, ruts, or bumps. Uneven terrain could
overturn the unit. Tall grass can hide obstacles.
3. Choose a slow speed so that you will not have to
stop or change speeds while on the slope.
4. Do not mow on wet grass. Tires may loose traction.
5. Always keep unit in gear especially when traveling
down slopes. Do not shift to neutral and coast down-
hill.
6. Avoid starting, stopping, or turning on a slope. If tires
lose traction, disengage the blade(s) and proceed
slowly straight down the slope.
7. Keep all movement on slopes slow and gradual. Do
not make sudden changes in speed or direction,
which could cause the machine to rollover.
8. Use extra care while operating machines with grass
catchers or other attachments; they can affect the
stability of the unit. Do not use on steeps slopes.
9. Do not try to stabilize the machine by putting your
foot on the ground (ride-on units).
10. Do not mow near drop-offs, ditches, or embank-
ments. The mower could suddenly turn over if a
wheel is over the edge of a cliff or ditch, or if an edge
caves in.
11. Do not use grass catchers on steep slopes.
12. Do not mow slopes you cannot back up them.
13. See your authorized dealer/retailer for recommenda-
tions of wheel weights or counterweights to improve
stability.
14. Remove obstacles such as rocks, tree limbs, etc.
15. Use slow speed. Tires may lose traction on slopes
even through the brakes are functioning properly.
16. Do not turn on slopes unless necessary, and then,
turn slowly and gradually downhill, if possible.
WARNING
Never operate on slopes greater than 17.6 percent
(10°) which is a rise of 3-1/2 feet (106 cm) vertically in
20 feet (607 cm) horizontally.
When operating on slopes use additional wheel
weights or counterweights. See your dealedretailer
to determine which weights are available and
appropriate for your unit.
Select slow ground speed before driving onto slope.
In addition to front weights, use extra caution when
operating on slopes with rear-mounted grass
catchers.
Mow UP and DOWN the slope, never across the
face, use caution when changing directions and DO
NOT START OR STOP ON SLOPE.
CHILDREN
Tragic accidents can occur if the operator is not alert to the
presence of children. Children are often attracted to the unit
and the mowing activity. Never assume that children will
remain where you last saw them.
1. Keep children out of the mowing area and under the
watchful care of another responsible adult.
2. Be alert and turn unit off if children enter the area.
3. Before and during reverse operation, look behind and
down for small children.
4. Never carry children, even with the blade(s) off. They
may fall off and be seriously injured or interfere with
safe unit operation. Children who have been given
rides in the past may suddenly appear inthe mowing
area for another ride and be run over or backed over
by the machine.
5. Never allow children to operate the unit.
6. Use extra care when approaching blind corners,
shrubs, trees, or other objects that may obscure
vision.
EMISSIONS
1. Engine exhaust from this product contains chemicals
known, in certain quantities, to cause cancer, birth
defects, or other reproductive harm.
2. Look for the relevant Emissions Durability Period and
Air Index information on the engine emissions label.
TOWED EQUIPMENT (RIDE=ON UNITS)
1. Tow only with a machine that has a hitch designed
for towing, Do not attach towed equipment except at
the hitch point.
2. Follow the manufacturer's recommendations for
weight limit for towed equipment and towing on
slopes.
3. Never allow children or others in or on towed equip-
ment.
4. On slopes, the weight of the towed equipment may
cause loss of traction and loss of control.
5. Travel slowly and allow extra distance to stop.
6. Do not shift to neutral and coast down hill.
IGNITION SYSTEM
1. This spark ignition system complies with Canadian
ICES-O02.
5
SERVICE AND MAINTENANCE
Safe Handling of Gasoline
1. Extinguish all cigarettes, cigars, pipes, and other
sources of ignition.
2. Use only approved gasoline containers.
3. Never remove the gas cap or add fuel with the engine
running. Allow the engine to cool before refueling.
4. Never fuel the machine indoors.
5. Never store the machine or fuel container where
there is an open flame, spark, or pilot light such as
near a water heater or other appliance.
6. Never fi[[ containers inside a vehicle or on a truck bed
with a plastic bed liner. Always place containers on
the ground away from your vehicle before filling.
7. Remove gas-powered equipment from the truck or
trailer and refuel it on the ground. If this is not possi-
ble, then refuel such equipment on a trailer with a
portable container, rather than from a gasoline dis-
penser nozzle.
8. Keep nozzle in contact with the rim of the fuel tank or
container opening at all times until fueling is com-
plete. Do not use a nozzle lock-open device.
9. If fuel is spilled on clothing, change clothing immedi-
ately.
10. Never over-fill the fuel tank. Replace gas cap and
tighten securely.
11. Use extra care in handling gasoline and other fuels.
They are flammable and vapors are explosive.
12. If fuel is spilled, do not attempt to start the engine but
move the machine away from the area of spillage and
avoid creating any source of ignition until fuel vapors
have dissipated.
13. Replace all fuel tank caps and fuel container caps
securely.
Service & Maintenance
1. Never run the unit in an enclosed area where carbon
monoxide fumes may collect.
2. Keep nuts and bolts, especially blade attachment
bolts, tight and keep equipment in good condition.
3. Never tamper with safety devices. Check their proper
operation regularly and make necessary repairs if
they are not functioning properly.
4. Keep unit free of grass, leaves, or other debris build-
up. Clean up oil or fuel spillage, and remove any fuel-
soaked debris. Allow machine to cool before storage.
5. If you strike an object, stop and inspect the machine.
Repair, if necessary, before restarting.
6. Never make adjustments or repairs with the engine
running.
7. Check grass catcher components and the discharge
guard frequently and replace with manufacturer's rec-
ommended parts, when necessary.
8. Mower blades are sharp. Wrap the blade or wear
gloves, and use extra caution when servicing them.
9. Check brake operation frequently. Adjust and service
as required.
10. Maintain or replace safety and instructions labels, as
necessary.
11. Do not remove the fuel filter when the engine is hot
as spilled gasoline may ignite. Do not spread fuel line
clamps further than necessary. Ensure clamps grip
hoses firmly over the filter after installation.
12. Do not use gasoline containing METHANOL, gasoho[
containing more than 10% ETHANOL, gasoline addi-
tives, or white gas because engine/fuel system dam-
age could result.
13. If the fuel tank must be drained, it should be drained
outdoors.
14. Replace faulty silencers/mufflers.
15. Maintain or replace safety and instructionlabels as
necessary.
16. Use only factory authorized replacement parts when
making repairs.
17.Always comply with factory specifications on all set-
tings and adjustments.
18.Only authorized service locations should be utilized
for major service and repair requirements.
19. Never attempt to make major repairs on this unit
unless you have been properly trained. Improper ser-
vice procedures can result in hazardous operation,
equipment damage and voiding of manufacturer's
warranty.
20. On multiple blade mowers, take care as rotating one
blade can cause other blades to rotate.
21. Do not change engine governor settings or over-
speed the engine. Operating the engine at excessive
speed can increase the hazard of personal injury.
22. Disengage drive attachments, stop the engine,
remove the key, and disconnect the spark plug
wire(s) before: clearing attachment blockages and
chutes, performing service work, striking an object, or
if the unit vibrates abnormally. After striking an
object, inspect the machine for damage and make
repairs before restarting and operating the equip-
ment.
23. Never place hands near the moving parts, such as a
hydro pump cooling fan, when the tractor is running.
(Hydro pump cooling fans are typically located on top
of the transaxle).
24. Units with hydraulic pumps, hoses, or motors: WARN-
ING: Hydraulic fluid escaping under pressure may
have sufficient force to penetrate skin and cause seri-
ous injury. If foreign fluid is injected into the skin it
must be surgically removed within a few hours by a
doctor familiar with this form of injury or gangrene
may result. Keep body and hands away from pin
holes or nozzles that eject hydraulic fluid under high
pressure. Use paper or cardboard, and not hands, to
search for leaks. Make sure all hydraulic fluid con-
nections are tight and all hydraulic hoses and lines
are in good condition before applying pressure to the
system. If leaks occur, have the unit serviced imme-
diately by your authorized dealer.
25. WARNING: Stored energy device. Improper release
of springs can result in serious personal injury.
Springs should be removed by an authorized techni-
cian.
26. Models equipped with an engine radiator: WARNING:
Stored energy device. To prevent serious bodily
injury from hot coolant or steam blow-out, never
attempt to remove the radiator cap while the engine is
running. Stop the engine and wait until it is cool.
Even then, use extreme care when removing the cap.
_ _icity Manufacturing, inc.
JdefltificatioflNumbers
•
When contacting your authorized dealer for replace-
ment parts, service, or information you MUST have
these numbers.
Record your model name/number, manufacturer's identi-
fication numbers, and engine serial numbers inthe
space provided for easy access. These numbers can be
found in the locations shown.
NOTE: For location of engine identification numbers,
refer to the engine owner's manual.
Tracto
Model Description Name/Number
Unit MFG Number Unit SERIAL Number
Mower Deck MFG Number Mower Deck SERIAL Number
Dealer Name Date Purchased
Engine Make
Engine Type/Spec
Mower ID Tag
Engine Model
Engine C0de/Serial Number
7
SafetyDecals
Safety Decals
This unit has been designed and manufactured to pro-
vide you with the safety and reliability you would expect
from an industry leader inoutdoor power equipment
manufacturing.
Although reading this manual and the safety instructions
it contains will provide you with the necessary basic
knowledge to operate this equipment safely and effec-
tively, we have placed several safety labels on the unit to
remind you of this important information while you are
operating your unit.
ROT°AtT_NeGraCtUeTrm_NwGerBLAD E
Decal - Danger,
Rotating Blades
Decal = Operating Instructions, North
American Models, Part No. 1726923
Part No. 1704277
All DANGER, WARNING, CAUTION and instructional
messages on your rider and mower should be carefully
read and obeyed. Personal bodily injury can result when
these instructions are not followed. The information is for
your safety and it is important! The safety decals below
are on your rider and mower.
Ifany of these decals are lost or damaged, replace them
at once. See your local dealer for replacements.
These labels are easily applied and will act as a constant
visual reminder to you, and others who may use the
equipment, to follow the safety instructions necessary for
safe, effective operation.
ROTATINGSHAFT
CORTA_T_AN_AUSESERIOUS
I_UURyORO_TR
KEEPRA_D_A_OFEET_LEAR
O0_OT_TA_DORR_DEO_
Decal - Danger,
Rotating Blades
Part No. 1704276
Decal - Danger, Rotating
Parts, 540 PTO Models
Part No. 1725575
Decal - 4WD Rollover
Part No. 1727089
Decal - Transmission
Release
Part No. 1725776
Decal =Attachment
Lift Control
Part No. 1725603
Switch Positions
I_ Decal - Ignition
Part No. 1722806
Decal - Cutting
Height
Part No. 1717583
Decal - Cutting
Height
Part No. 1721197
Decal- Danger, Rotating Fan,
Diesel Models Part No. 1726045
Decal =Throttle
Positions
Part No. 1725571
Decal - PTO Selector
Positions
Part No. 1725574
Safetylcofls/ SafetyinteplockTest
Safety icons
Warning: Read Operator's
Manual.
Read and understand the
Operator's Manual before using
this machine.
Danger: Thrown Objects.
This machine is capable of throwing
objects and debris. Keep
bystanders away.
Warning: Remove Key Before
Servicing.
Remove the key and consult techni-
cal literature before performing
repairs or maintenance.
Warning: Rotating Shaft Can
Cause Injury or Death.
Keep hands and feet clear.
Danger: Machine Rollover.
Do not use this machine on slopes
greater than 10°.
Danger: Dismemberment.
This machine can amputate limbs.
Keep bystanders and children away
when engine is running.
Danger: Dismemberment.
This mower deck can amputate
limbs. Keep hands and feet away
from blades.
Safety interlock System
Tests
This unit is equipped with safety interlock switches and
other safety devices. These safety systems are pre-
sent for your safety: do not attempt to bypass safety
switches, and never tamper with safety devices. Check
their operation regularly.
Operational SAFETY Checks
Your unit is equipped with a seat switch safety system.
Check the seat switch operation every fall and spring
with the following tests.
Test 1 m Engine should NOT crank if:
• PTO switch is ON, OR
• Brake pedal is NOT fully depressed (parking brake
OFF), OR
• The cruise control lever is NOT in NEUTRAL.
Test 2 m Engine SHOULD crank if:
• PTO switch is OFF, AND
° Brake pedal is fully depressed (parking brake ON),
AND
° The cruise control lever is in NEUTRAL.
Test 3 m Engine should SHUT OFF if:
° Operator rises off seat with PTO engaged, OR
° Operator rises off seat with brake pedal NOT fully
depressed (parking brake OFF).
Test 4 _ Blade Brake Check
Mower blades and mower drive belt should come to a
complete stop within five seconds after PTO switch is
turned OFF. If mower drive belt does not stop within
five seconds, see your dealer.
Test 5 _ Reverse Mow Option (RMO) Check
• Engine should shut off if reverse travel isattempted
ifthe PTO has been switched on and RMO has not
been activated.
° RMO light should illuminate when RMO has been
activated.
NOTE: Once the engine has stopped, the PTO switch
must be turned off after the operator returns to the seat
in order to start the engine.
WARNING
If the unit does not pass a safety test, do not
operate it. See your authorized dealer. Under no
circumstance should you attempt to defeat the
purpose of the safety interlock system.
9
Features& Controls
Control Functions Figure 1. Controls
The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing
require the combined use of several controls applied in specific sequences. To learn what combination and sequence
of controls to use for various tasks see the OPERA TION section.
W Choke (Select lVlodels)
Close the choke for cold starting. Open the choke once
the engine starts. A warm engine may not require chok-
ing. Pull the choke control out to close the choke.
_I_IP__ Throttle Control
The throttle controls engine speed. Move the throttle for-
ward to increase engine speed and back to decrease
engine speed. Always operate at FULL throttle.
_1 Headlights
The light switch turns the tractor headlights on and off.
10
Front A×Je Oil LeveJ Plug
(4WD Models Only)
The front axle oil check plug/dipstick is used to check the
front axle oil level and to add oil to the axle, See FRONT
AXLE MAINTENANCE for oil level check and fill proce-
dures,
Transmission Oil LeveJ Check PJug
Transmission oil check plug/dipstick is used to check
transmission oil level and to add oil to the transmission.
See TRANSMISSION MAINTENANCE for oil level check
and fill procedures.
Features& Cofltrols,
_ Attachment Lift Control Lever
When using the mower deck, lift the deck off the ground
while transporting to and from the job site. DO NOT cut
with the mower in the raised, transport position.
The attachment lift control lever raises and lowers
attachments that utilize the tractor's hydraulic lift cylinder.
This lever also controls attachments that use the tractor's
auxiliary hydraulics via the quick couplers on the front left
and right sides of the frame.
When using a mower deck (Front / Rear Hydraulic selec-
tor switch must be in REAR position), pulling the lever
back raises the attachment lift. Pushing the lever for-
ward to the first detent lowers the attachment lift.
Pushing the lever forward to the second detent locks the
control in "float" position, allowing the lift mechanism to
float up and down. Float is the recommended position
when mowing.
For a complete explanation on this control, see
HYDRAULIC SYSTEM FUNCTIONS.
H_ Cutting Height Adjustment
The cutting height adjustment switch controls the mower
cutting height. This same switch also controls the spout
rotator motor when a snowthrower is installed. The
arrows on the switch correspond to the direction of
adjustment (UP arrow raises cutting height, RIGHT arrow
rotates the spout right, etc). The mower cutting height is
infinitely adjustable between 1" to 4-13/32" (2,5 cm-11,2
cm). When the adjustment indicator has reached the
end of its travel, release the switch; holding the switch
down will damage the motor.
_'_ Ignition Switch
The ignition switch starts and stops the engine, it has
three positions:
OFF Stops the engine and shuts off the
electrical system.
_RUN
Allows the engine to run and powers the
electrical system. Activates the glow
plugs on diesel models
Ground Speed Pedals
The tractor's forward ground speed is controlled by the
forward ground speed control pedal. The tractor's
reverse ground speed is controlled by the reverse
ground speed control pedal. Note that the further down
the pedal is depressed, the faster the tractor will travel.
_ Parking Brake
The parking brake knob is used to lock the parking brake
when the tractor is stopped. Fully depressing the brake
pedal and pulling the knob out engages the parking
brake. Refer to page 10 for a full explanation of parking
brake functions.
_" Steering Tilt Adjust (Select Models)
Use the tilt knob located on the bellows to release the
pivot mechanism and pivot the wheel to the desired posi-
tion. Release the tilt knob to lock in position.
_Seat Adjustment Lever
The seat can be adjusted forward and back. Move the
lever, position the seat as desired, and release the lever
to lock the seat into position.
H D Cruise Control
The cruise control is used to lock the ground speed con-
trol in forward. Move the lever forward until the desired
ground speed is reached. To disengage the cruise con-
trol move the lever back. In the event you need to stop
quickly, depressing the brake pedal will also return the
cruise control to neutral.
2=Wheel / 4-Wheel Drive Selector
(Select Models)
The 2-wheel/4-wheel drive selector disengages the
front wheels in the 2-wheel drive position and drives all
four wheels in 4-wheel drive position. Engage / disen-
gage the 4-wheel drive control only when stopped or at
slow speeds.
W START Cranks the engine for starting.
NOTE. Never leave the ignition switch in the RUN posi-
tion with the engine stopped-this drains the battery.
D Brake Pedal
Depressing the brake pedal applies the tractor brake.
Depressing the brake pedal will also return the cruise
control lever to neutral.
Transmission Release Valve Lever
The transmission release valve lever deactivates the
transmission so that the tractor can be pushed by hand.
See PUSHING THE TRACTOR BY HAND for opera-
tional information.
r_ Fuel Tank
To remove the cap, turn counterclockwise.
11
Features& Cefltrols
Transmission Oil Level Check Plug
Transmission oil check plug/dipstick is used to check
transmission oil level and to add oil to the transmission.
See TRANSMISSION MAINTENANCE for oil level check
and fill procedures.
Mid / Rear PTO Selector
The mid / rear PTO selector lever selects which PTO or
combination of PTOs is activated by the PTO switch.
The selector has three positions (from front to back:)
mid PTO active only, mid and rear PTO active, rear PTO
active only. Disengage the PTO switch before altering
this control's setting.
_ Front/Rear Hydraulics Selector
The front / rear hydraulics selector switches which
hydraulic circuit is controlled by the forward and back-
ward movement of the attachment lift lever.
When the switch is in the forward position, the attach-
ment lift control lever affects attachments connected to
the two front left quick couplers. When the switch is in
the rear position the attachment lift control affects the
tractor's hydraulic cylinder.
Power Outlet (Select Models)
The power outlet is 12V-DC. Accessory must be rated at
14 amps or less.
'_' Differential Lock Pedal
Depressing this pedal locks the transmission differential,
locking both rear wheels into "drive".
Use this feature if the tractor is stuck because one wheel
is slipping. Engage the differential lock at slow
ground speeds only.
_PTO Switch
The PTO (Power Take-Off) switch, in conjunction with
the mid / rear PTO selector, engages and disengages
attachments connected to the tractor's mid or rear PTO
shafts. To engage the PTO, pull UP on the switch. Push
DOWN to disengage. Be sure to check the position of
the mid / rear PTO selector lever before engaging the
PTO. DO NOT engage a PTO that is not connected to
an attachment as the rotating shaft is a safety hazard.
Note that the operator must be seated firmly in the trac-
tor seat for the PTO to function.
_ Reverse Mowing Option (RMO)
The Reverse Mowing Option allows for mowing (or use
of other PTO driven attachments) while traveling in
reverse. If you choose to mow or operate another
attachment in reverse, turn the RMO key after the PTO is
engaged. The L.E.D. light will illuminate, and the opera-
tor can then mow in reverse. Each time the PTO is dis-
engaged the RMO needs to be reactivated if desired.
Parking Brake Function
Applying the Parking Brake - See Figure 2. To lock
the parking brake, release the ground speed pedals (A),
fully depress the brake pedal (B), pull the parking brake
knob (C) out, and then release brake pedal.
Releasing the Parking Brake - See Figure 2. To
release the parking brake, fully depress the brake pedal
(B) and push in the parking brake knob (C).
Automatic Controlled Traction
What is Automatic Controlled Traction?
Automatic Controlled Traction (ACT) is an exclusive fea-
ture of our transmissions that provides improved traction.
ACT applies a preset amount of torque to both rear
wheels even if one starts slipping (a transmission without
ACT will lose traction completely if one rear wheel starts
slipping). This preset torque is just enough to provide
additional traction, and still allow the wheels to turn at dif-
ferent speeds in a tight turn without damaging the lawn.
What to Expect from Your ACT Tractor
For the most part, while using your tractor you will not
notice ACT working, and you will simply become accus-
tomed to increased traction an ACT transmission pro-
vides.
Under certain circumstances the ACT system limit can 12
Figure 2. Engaging the Parking Brake
A. Ground Speed Pedals
B. Brake Pedal
C. Parking Brake Knob
be exceeded, and one of the rear wheels may slip (for
instance if trying to turn up a hill while accelerating).
This is normal. If you start to lose traction, do not speed
up. Instead, slow to a stop, straighten the steering
wheel, and slowly accelerate. Stopping the tractor
allows the transmission to regain more traction.
Dashboard Display Functions
The dashboard display shows a variety of engine opera-
tion and control status information, as explained in the
descriptions below.
A. Irregular Voltage
Indicates that the voltage being produced by the charg-
ing system and battery is higher or lower than normal
levels.
B, Rear PTO Light
Indicates that the optional rear PTO is engaged.
C. Mid (Front) PTO Light
Indicates that the mid PTO is engaged.
D. Hour Meter/Clock
Displays number of hours the unit has been operated.
E. Cruise Control Light
Indicates that the cruise control is engaged.
R Low Oil Pressure Light
Indicates that the engine oil pressure is low. Ifthis indi-
cator lights, shut the engine off immediately and contact
your dealer.
Features& Cefltrols
I
® @ G
G, 4 Wheel Drive Light (4WD Models Only)
Indicates that 4 wheel drive is engaged.
H. Fuel Separator Full Light
Indicates that the fuel separator is full and must be emp-
tied.
l. Fuel Gauge
The fuel gauge shows the level of fuel in the fuel tank.
J. Tachometer
Displays the engine RPM. Normal operating speed is
3400 RPM. Do not operate at less than 3000 RPM dur-
ing normal use.
K. Coolant Temperature
Shows the engine coolant temperature.
L. Glow Plug Light
Indicates that the glow plugs are heating. Leave the key
in the run position until the light goes out, then turn the
key to start.
13
Loading...