Snapper 2442 User Manual

Download

Page 1

Attachment

Illustrated

Parts List

Attachment

. No. Description

1692150 Catcher, Clean Sweep Twin, 34"

MANUFACTURING, INC.

500 N. Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA

www.simplicitymfg.com

Part No.:

TP 400-2442-01-AT-SMA

Rev.

1730792 03/2008

Page 2

Page 3

Table Of Content

PRODUCT COMPONENTS PAGES

Adapter, Blade & Tube Group .............................................................................................................................

Cover & Bag Group - Twin ...................................................................................................................................

Hitch Group ..........................................................................................................................................................

Torque Specification Chart ..................................................................... Inside Back Cover

4 6 8

Page 4

Adapter, Blade & Tube Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

984490

The above parts group applies to the following Mfg. Nos.:

1692150 - Catcher

Briggs and Stratton Yard Power Products Group

TP 400-2442-01-AT-SMA

Page 5

Adapter, Blade & Tube Group

PART NO. DESCRIPTIONREF NO QTY.

NUT, Hex Washer Assembly, Hex, #10-32 1 1928919SM 4 EXHAUST SHIELD, Front 2 1713286ASM 1 SCREW, Truss Head, 10-32 x 1/2 3 1930531SM 4 EXHAUST SHIELD, Rear 4 1713287ASM 1 TUBE, Transfer 5 1703769SM 1 CAPSCREW, Hex Head, 5/16-18 x 3/4 6 1960122SM 1 WASHER, Flat, 5/16 7 1919326SM 1 LATCH, Tube 8 1704603SM 1 WASHER, Flat, 5/16 9 1960185SM 1 NUT, Flange Lock, 5/16-18 10 1935048SM 1 CAPSCREW, Hex Head, 5/16-18 x 3/4 11 1960371SM 3 WASHER, Special 12 1704341SM 1 LOCKNUT, Hex, 5/16-18 13 1919438SM 3 ADAPTER 14 1709135SM 1 BRACKET, Attachment 15 1704355ASM 1 NUT, Centerlock, 5/16-18 16 1928698SM 1 WING NUT ASSEMBLY 5/16 17 1679163SM 1 NUT, Hex Flange, 5/16-18 18 1927557SM 1 CUP 19 1679164ASM 1 NUT, Hex, 5/16-18 20 1917372SM 3 LOCKWASHER, 5/16 21 1917356SM 3 SPACER 22 1674669SM 2 CARRIAGE BOLT, 5/16-18 x 2-1/4 23 1960273SM 1 CARRIAGE BOLT, 5/16-18 x 1-3/4 24 1931338SM 2 BAFFLE 25 1709112A 1 CARRIAGE BOLT, 5/16-18 x 5/8 26 1931332SM 1 ADAPTER, Blade, High Lift 27 1705010SM 1 BLADE, High Lift 28 1706739ASM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1692150 - Catcher

Briggs and Stratton Yard Power Products Group

TP 400-2442-01-AT-SMA

Page 6

Cover & Bag Group - Twin

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

983952

The above parts group applies to the following Mfg. Nos.:

1692150 - Catcher

Briggs and Stratton Yard Power Products Group

TP 400-2442-01-AT-SMA

Page 7

Cover & Bag Group - Twin

PART NO. DESCRIPTIONREF NO QTY.

TUBE ASSEMBLY Support (Incl. Ref. Nos. 2, 3, 4, 5, 6, 8, 9 & 11) 1 1704615SM 1 RIVET, Pop 2 1960381SM 7 SUPPORT, Tube 3 1704075SM 1 SEAL, Cover 4 1704135SM 1 BRACKET, Seal 5 1704508SM 3 SCREW, Round Head, #8-32 x 7/8 6 1960399SM 1 LOCKNUT, Flange, 1/4-20 7 1930642SM 5 WASHER 8 1960096SM 2 STRAP, Tube Support 9 1704507SM 1 SCREW, Taptite, 1/4-20 x 3/8 10 1929000SM 2 NUT, Hex, Lock, #8-32 11 1960077SM 2 CARRIAGE BOLT, 1/4-20 x 5/8 12 1960252SM 5 CROSS ASSEMBLY 13 1727129ASM 1 CROSS ASSEMBLY 13 1727129ASM 1 CAPSCREW, Hex Head, 3/8-16 x 7/8 14 1921966SM 4 NUT, Hex, Whizlock, 3/8-16 15 1928352SM 4 CLIP, Hairpin 16 1960221SM 2 SCREEN 17 1703700SM 1 NUT, Hex, 5/16-18 18 1917372SM 4 LOCKWASHER, 5/16 19 1917356SM 4 CLAMP 20 1672023ASM 2 HANGER 21 1703807ASM 2 CARRIAGE BOLT, 5/16-18 x 3/4 22 1931333SM 4 HOOP, Bag 23 1703855ASM 2 BAG, Grass 24 1703764SM 2 TUBE CLIP, Grass Bag 25 1675707SM 2 SEAL, Clip 26 1704057SM 1 SCREW, Truss Head, #10-32 x 1/2 27 1930531SM 2 RIVET, Pop 28 1675043SM 4 HANDLE, Latch 29 1703853SM 1 NUT, Hex, #10-32 30 1928919SM 2 PIN, Round Head 31 2860367SM 2 WASHER 32 1910531SM 4 CLIP, Canoe 33 1667248SM 6 DECAL, Safety 34 1732820SM 1 COVER 35 1704056SM 1 WINDOW 36 1704180SM 2 NUT, Speed 37 1933886SM 1 CABLE, Double Loop 38 1705876SM 1 WASHER, 1/4 39 1921319SM 1 SCREW, Self-tapping, #10-12 x 5/8 40 1960400SM 1 COVER ASSEMBLY (Incl. Ref. Nos. 17, 26, 28, 32, 37, 38, 39 & 40) 41 1704056SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1692150 - Catcher

Briggs and Stratton Yard Power Products Group

TP 400-2442-01-AT-SMA

Page 8

Hitch Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

984491

The above parts group applies to the following Mfg. Nos.:

1692150 - Catcher

Briggs and Stratton Yard Power Products Group

TP 400-2442-01-AT-SMA

Page 9

Hitch Group

PART NO. DESCRIPTIONREF NO QTY.

SUPPORT, Catcher 1 1709111ASM 1 PIN, Round Head, Drilled 2 2102004SM 1 SUPPORT ASSEMBLY 3 1709022ASM 1 CLIP, Pin, Safety 4 2176012SM 1 CAPSCREW, Hex Head, 5/16-18 x 3 5 1960590SM 4 WASHER, Plain 5/16 6 1919326SM 8 ANCHOR ASSEMBLY, Older Models 7 1709026ASM 2 ANCHOR ASSEMBLY, Newer Models 7 1726975ASM 2 NUT, Hex Flange Two-Way Lock 5/16-18 9 1935048SM 4

Footnotes

The above parts group applies to the following Mfg. Nos.:

1692150 - Catcher

Briggs and Stratton Yard Power Products Group

TP 400-2442-01-AT-SMA

Page 10

Page 11

Hex Head Capscrew

Hex Nut

Lockwasher

Washer

Carriage Bolt

Hardware Identification & Torque Specifications

Screw, 1/2 x 2

Body

Diameter

Body

Length

Inside Diameter

Nut, 1/2”

Marks

3/8” Bolt or Nut

Wrench—9/16”

3/8

5/16” Bolt or Nut

Wrench—1/2”

5/16

1/4” Bolt or Nut

Wrench—7/16”

1/4

1/2” Bolt or Nut

Wrench—3/4”

1/2

DIA.

7/16 DIA.

7/16” Bolt or Nut

Wrench (Bolt)—5/8”

Wrench (Nut)—11/16”

Wrench & Fastener Size Guide

1/4 3/4

1/2

1/4 3/4

1/2

1/4 3/4

1/2

1/4 3/4

1/2

Common Hardware Types

Torque Specification Chart

FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)

Hardware Grade

Size Of

Standard Hardware Sizing

When a washer or nut is identified as 1/2”, this is the

Nominal size

second number is present it represent the When bolt or capscrew is identified as 1/2 - 16 x 2”, this

means the second number represents the example, and the final number is the bolt or screw (in this example 2 inches long).

, meaning the

Nominal size

inside diameter

, or

body diameter

threads per inch

is 1/2 inch; if a

threads per inch

is 1/2 inch; the

body length

(16 in this

of the

The guides and ruler furnished below are designed to help you select the appropriate hardware and tools.

Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.

8-32 8-36 10-24 10-32 1/4-20 1/4-28 5/16-18 11 15.0 17 23.1 25 34.0 5/16-24 12 16.3 19 25.8 27 34.0 3/8-16 20 27.2 30 40.8 45 61.2 3/8-24 23 31.3 35 47.6 50 68.0 7/16-14 30 40.8 50 68.0 70 95.2 7/16-20 35 47.6 55 74.8 80 108.8 1/2-13 50 68.0 75 102.0 110 149.6 1/2-20 55 74.8 90 122.4 120 163.2 9/16-12 65 88.4 110 149.6 150 204.0 9/16-18 75 102.0 120 163.2 170 231.2 5/8-11 90 122.4 150 204.0 220 299.2 5/8-18 100 136 180 244.8 240 326.4 3/4-10 160 217.6 260 353.6 386 525.0 3/4-16 180 244.8 300 408.0 420 571.2 7/8-9 140 190.4 400 544.0 600 816.0 7/8-14 155 210.8 440 598.4 660 897.6 1-8 220 299.2 580 788.8 900 1,244.0 1-12 240 326.4 640 870.4 1,000 1,360.0

1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews.

2. Recommended seating torque values for locknuts:

a. for prevailing torque locknuts - use 65% of grade 5 b. for flange whizlock nuts and screws - use 135% of

3. Unless otherwise noted on assembly drawings, all torque values must meet this specification.

SAE Grade 2 SAE Grade 5 SAE Grade 8

in/lbs in/lbs

2.1

2.3

3.1

3.5

7.6 8 10.9 12 16.3

8.6 10 13.6 14 19.0

torques. grade 5 torques.

30 31 43 49

NOTES

in/lbs

3.4

3.5

4.9

5.5

41 43 60 68

4.6

4.9

6.8

7.7

Page 12

Snapper 2442 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual