Snapper 1807-1 User Manual

Owner’s Manual

Questions? Help is just a moment away!

Helpline - 1-800-317-7833 M-F 8-5 CT

Model No. 1807-1 (2300 PSI Pressure Washer) Manual No. 193896GS Revision 0 (09/30/2003)

2300PSI

Pressure Washer

BRIGGS & STRATTON POWER PRODUCTS GROUP, LLC

JEFFERSON,WISCONSIN, U.S.A.

This Snapper™ product is distributed under license to Briggs & Stratton Power Products.

TABLE OF CONTENTS

Safety Rules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Know Your Pressure Washer. . . . . . . . . . . . . . . . . . . . . . . . 5

Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10

Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-13

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-16

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19

Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Last Page

EQUIPMENT

DESCRIPTION

Read this manual carefully and become familiar
with your pressure washer. Know its
applications, its limitations and any hazards
involved.

Every effort has been made to ensure that information in
this manual is accurate and current. However, we reserve
the right to change, alter or otherwise improve the product
and this document at any time without prior notice.

SAFETY RULES

This is the safety alert symbol. It is used to
alert you to potential personal injury hazards.
Obey all safety messages that follow this
symbol to avoid possible injury or death.

The safety alert symbol ( ) is used with a signal word
(DANGER, CAUTION,WARNING), a pictorial and/or a
safety message to alert you to hazards. DANGER indicates
a hazard which, if not avoided, will result in death or serious
injury. WARNING indicates a hazard which, if not avoided,
could result in death or serious injury. CAUTION
indicates a hazard which, if not avoided, might result in
minor or moderate injury. CAUTION, when used
without the alert symbol, indicates a situation that could
result in equipment damage. Follow safety messages to
avoid or reduce the risk of injury or death.

Hazard Symbols and Meanings

2

Snapper 2300 PSI Pressure Washer

In the State of California a spark arrester is required by law
(Section 4442 of the California Public Resources Code).
Other states may have similar laws. Federal laws apply on
federal lands. If you equip the muffler with a spark arrester,
it must be maintained in effective working order.

The engine exhaust from this product contains
chemicals known to the State of California to cause
cancer, birth defects, or other reproductive harm.

WARNING

Fire

Explosion

Toxic Fumes

Hot Surface

Moving Parts

Electrical Shock

Slippery Surface

Fall

Kickback

Flying Objects

Fluid Injection

Snapper 2300 PSI Pressure Washer

3

• Keep water spray away from electric wiring or fatal electric
shock may result.

Spray contact with electrical wiring can result in
electrocution.

WARNING

• Operate pressure washer ONLY outdoors.

• Use a respirator or mask whenever there is a chance that
vapors may be inhaled.

• Read all instructions with mask so you are certain the mask will
provide the necessary protection against inhaling harmful vapors.

Running engine gives off carbon monoxide, an
odorless, colorless, poison gas.

Some chemicals or detergents may be harmful if
inhaled or ingested, causing severe nausea,
fainting or poisoning.

Breathing carbon monoxide will cause nausea,
fainting or death.

DANGER

• Keep spray nozzle between 8 to 24 inches away from cleaning
surface.

• Operate this unit on a stable surface.

• The cleaning area should have adequate slopes and drainage to
reduce the possibility of a fall due to slippery surfaces.

• Be extremely careful if you must use the pressure washer from
a ladder, scaffolding or any other relatively unstable location.

• Firmly grasp spray gun with both hands when using high
pressure spray to avoid injury if gun kicks back.

Use of pressure washer can create puddles and
slippery surfaces.

High pressure spray could cause you to fall if
you are too close to the cleaning surface.

WARNING

WHEN ADDING FUEL

• Turn pressure washer OFF and let it cool at least 2 minutes
before removing gas cap.

• Fill fuel tank outdoors.

• DO NOT overfill tank.Allow space for fuel expansion.

• Keep fuel away from sparks, open flames, pilot lights, heat,and
other ignition sources.

• DO NOT light a cigarette or smoke.

WHEN OPERATING EQUIPMENT

• DO NOT tip engine or equipment at angle which causes fuel
to spill.

• DO NOT spray flammable liquids.

WHEN TRANSPORTING OR REPAIRING EQUIPMENT

• Transport/repair with fuel tank EMPTY or with fuel shutoff
valve OFF.

WHEN STORING FUEL OR EQUIPMENT WITH FUEL
IN TANK

• Store away from furnaces, stoves, water heaters,clothes
dryers or other appliances that have pilot light or other
ignition source because they can ignite fuel vapors.

Fuel and its vapors are extremely flammable and
explosive.

Fire or explosion can cause severe burns or
death.

WARNING

• NEVER aim spray gun at people, animals or plants.

• DO NOT allow CHILDREN to operate pressure washer.

• NEVER repair high pressure hose. Replace it.

• Keep high pressure hose connected to pump and spray gun
while system is pressurized.

The high pressure stream of water that this
equipment produces can pierce skin and its
underlying tissues, leading to serious injury and
possible amputation.

WARNING

4

Snapper 2300 PSI Pressure Washer

• DO NOT tamper with governed speed.

• DO NOT operate pressure washer above rated pressure.

Excessively high or low operating speeds increase risk
of injury and damage to pressure washer.

CAUTION

WHEN ADJUSTING OR MAKING REPAIRS TO YOUR
PRESSURE WASHER

• Disconnect spark plug wire from spark plug and place wire
where it cannot contact spark plug.

Unintentional sparking can result in fire or
electric shock.

WARNING

• DO NOT point spray gun at glass when in jet spray mode.

• NEVER aim spray gun at plants.

High pressure spray may damage fragile items including
glass.

CAUTION

• DO NOT wear loose clothing, jewelry or anything that may
be caught in the starter or other rotating parts.

• Tie up long hair and remove jewelry.

Starter and other rotating parts can entangle
hands, hair, clothing, or accessories.

WARNING

• Always wear eye protection when using this equipment or in
vicinity of where equipment is in use.

High pressure spray can cause paint chips or
other particles to become airborne.

WARNING

• DO NOT secure spray gun in open position.

• DO NOT leave spray gun unattended while machine is
running.

• NEVER use a spray gun which does not have a trigger lock or
trigger guard in place and in working order.

• Always be certain spray gun,nozzles and accessories are
correctly attached.

A pressure washer produces a high pressure spray
which increases risk of injury and damage to unit.

CAUTION

• If you have questions about intended use, ask dealer or
contact Snapper.

• NEVER operate units with broken or missing parts, or
without protective housing or covers.

• DO NOT by–pass any safety device on this machine.

• Before starting pressure washer in cold weather, check all
parts of the equipment to be sure ice has not formed there.

• NEVER move machine by pulling on high pressure hose. Use
handle provided on unit.

• Check fuel system for leaks or signs of deterioration, such as
chafed or spongy hose, loose or missing clamps,or damaged
tank or cap. Correct all defects before operating pressure
washer.

• This equipment is designed to be used with Briggs & Stratton
Power Products authorized parts ONLY. If equipment is used
with parts that DO NOT comply with minimum specifications,
user assumes all risks and liabilities.

Improper treatment of pressure washer can damage it
and shorten its life.

CAUTION

• DO NOT touch hot surfaces.

• Stay clear of exhaust gases.

• Allow equipment to cool before touching.

Running engines produce heat and hot exhaust
gases.Temperature of muffler and nearby areas
can reach or exceed 150°F (65°C).

Fire or severe burns can occur.

WARNING

Snapper 2300 PSI Pressure Washer

5

KNOW YOUR PRESSURE WASHER

Read this owner’s manual and safety rules before operating your pressure washer.

Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.

Adjustable Nozzle — Always attached to nozzle extension.
Adjustable nozzle allows you to adjust force of spray and spray
pattern.

Air Cleaner — Dry type filter element limits the amount of
dirt and dust that gets in the engine.

Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground.This system prevents
internal pump damage.

Chemical Injection Siphon/Filter — Use to siphon
detergent or other pressure washer chemicals into the low
pressure stream.

Data Tag (not shown, near rear of base plate) —
Provides model, revision and serial number of pressure washer.
Please have these readily available if calling for assistance.

Fuel Cap — Fill with clean unleaded fuel here.
High Pressure Hose — Connect one end to water pump

and the other end to spray gun.

High Pressure Outlet — Connection for pressure hose.
Nozzle Extension — Attach to spray gun to use adjustable

nozzle.

Oil Fill Cap/Dipstick — Used for checking and adding oil.
Pump — Develops high pressure.
Recoil Starter — Used for starting the engine manually.
Spray Gun — Controls the application of water onto

cleaning surface with trigger device. Includes safety latch.
Water Inlet — Connection for garden hose.

High Pressure Hose

Adjustable Nozzle

High Pressure Outlet

& Water Inlet

Pump equipped with Automatic
Cool Down System

Spray Gun

Fuel Cap

Oil Fill

Cap/Dipstick

Recoil Starter

Nozzle Extension

Air Cleaner

Chemical Injection

Siphon/Filter

ASSEMBLY

IMPORTANT: Read entire owner’s manual before you

attempt to assemble or operate your new pressure washer.

Remove Pressure Washer from

Carton

• Remove parts bag included with pressure washer.

• Slice two corners at end of carton from top to bottom
so panel can be folded down flat, then remove all packing
material.

• Remove pressure washer from carton.

Carton Contents

Check all contents.

• Main unit

• Engine Oil

• Safety Goggles

• High Pressure Hose

• Spray Gun

• Nozzle Extension

• Parts Bag (which includes the following):

• Owner’s Manual

• Engine Manual

• Owner’s Registration Card

• Maintenance Kit

• Handle Fastening Hardware Kit (which includes):

• Carriage Bolts (2)

• Plastic Knobs (2)

• “L” Hooks (2)

• Lock Nuts (2)

PREPARING PRESSURE

WASHER FOR USE

If you have any problems with the assembly of your
pressure washer or if parts are missing or damaged, call the
pressure washer helpline at 1-800-317-7833. If calling for
assistance, please have model, revision, and serial number
from data tag available.

To prepare your pressure washer for operation, you
will need to perform these tasks:

1. Fill out and send in registration card.

2. Add oil to engine crankcase.

3. Add fuel to fuel tank.

4. Connect high pressure hose to spray gun and pump.

5. Connect water supply to pump.

6. Attach nozzle extension to spray gun.

Attach Handle

1. Place handle assembly onto handle supports connected
to main unit. Make sure holes in handle align with
holes on handle supports (Figure 1).

NOTE: It may be necessary to move the handle supports
from side to side in order to align the handle so it will slide
over the handle supports.

2. Insert carriage bolts through holes from outside of
unit and attach a plastic knob from inside of unit
(Figure 2).Tighten by hand.

3. Insert one “L” hook through hole just under billboard
on left side of handle (viewing from rear of unit). Hold
hook in place with pliers and attach locknut with a
7/16” wrench (Figure 3).

6

Snapper 2300 PSI Pressure Washer

Hose Hook

Spray Gun
Hook

Figure 3 — Attach “L” Hooks to Handle

Align Holes

Handle

Handle

Supports

Figure 1 — Attach Handle to Base

Figure 2 — Secure Handle