Parts Manual fo
r
r
38" & 42" Twin Bag Catche
MODEL
1695171
Briggs & Stratton Yard Power Products Group
535 Macon Road
McDonough, GA, 30253 U.S.A.
800-935-2967
Revision IR,
Manual No. 7102883
TP 400-5414-IR-AT-N9/2/2008
s
PAGE GROUP
4
Twin Bag Catcher Assembly
Table Of Content
38" & 42" Twin Bag Catcher
Manual No. 7102883
3
TP 400-5414-IR-AT-N
Twin Bag Catcher Assembly
Manual No. 7102883
TP 400-5414-IR-AT-N
38" & 42" Twin Bag Catcher
4
Twin Bag Catcher Assembly
p
y
Part No Descri
1 1733758 1 COVER ASSEMBLY, Twin Catcher (Includes Ref Nos. 47, 48, 49,
2 19604 0 4 2 SCR E W, Phillips, 10 - 24 x 3/ 4
3 720537 1 HANDLE, Plastic
4 1933896 2 NUT, Hex .10 - 24
5 1675707 2 CLIP, Tube Grass Bag
6 1703764 2 BAG, Gr ass
7 1733491 2 HOOP, T w in
8 1931333 6 BOLT, Carriage, 5/16 - 18 x 3/4, G5
9 1703807A 2 HANGER, Grass Bag
10 1672023A 2 CLAMP, Grass Bag
11 1917356 4 LOCKWASHER, Spring, 5/16
12 1917372 4 NUT, Hex, 5/16 - 18
13 1664847 7 SCREW, Hex Washer Head Taptite, 5/16 - 18 x 3/4
14 1733613A 1 BRACKET, Cross Support, Twin
15 1928352 8 NUT, Hex, 3/8-16
16 1734428A 1 CHANNEL, Cross Support Twin
17 1707526A 1 SUPPORT, Upright
18 1933260 8 SCREW, Hex Whiz Lock Flange 3/8 - 16 x 1
19 1733627 1 SUPPORT ASSEMBLY, Catcher
20 1960033 1 CLIP, Hair Pin
21 1728976 2 BOLT, Shoulder, 5/16 - 18 x 1.62
22 1960717 2 NUT, Speed, 5/16 - 18
23 1933988 2 NUT, Push Pal
24 720125 1 NUT, W ingnut
25 1960252 1 BOLT, Carriage, 1/4 - 20 x .625
26 720543 1 PIN, Latch
27 720076 1 SCREW, Machine 1/4 - 20 x 1
28 720074 1 SCREW, Machine 1/4 - 20 x .50
29 722855 1 SCREW, 1/7 x .75
30 1733885 1 ELBOW, Upper Tu be
31 1734299 1 TUBE, Catcher
32 1928372 2 NUT, Hex Keps, 1/4 - 20
33 1930642 2 NUT, Hex Flange, 1/4 - 20
34 2171600 1 STRAP, Hood
35 720533 1 HANDLE, Connect Tube
36 1734367 1 TUBE, Boot
37 1733098 1 KNOB
tionItem Qt
Note
50, 51, 52, 53 & 54)
Footnotes:
Note* Not a serviceable part.
Manual No. 710288338" & 42" Twin Bag Catcher
5
TP 400-5414-IR-AT-N
Twin Bag Catcher Assembly
Manual No. 7102883
TP 400-5414-IR-AT-N
38" & 42" Twin Bag Catcher
6
Twin Bag Catcher Assembly
p
y
Part No Descri
38 1733948A 1 PLATE, Reinforcement, Upright
39 1925003 4 SCREW, Hex Washer Head Taptt 1/4 - 20 x.5
40 720525 2 PIN, Cover Hinge
41 1733504A 2 PIVOT, Hinge
42 1960074 2 CLIP, Hair Pin
43 -- 1 * DECAL, ID Plate
45 1733903A 1 PLATE, Reinforcement, Frame
46 1930595 2 SCREW, Hex Whiz Lock Flange, 5/16 - 18 x 1.25
47 1732488 1 SCREEN, Twin
48 1734384 1 SCREEN SUPPORT, Twin
49 1732490 6 FASTENER, Push .25 x .50
50 1910531 12 WASHER, Rivet .188
51 1673320 18 RIVET, Pop .188
52 1732819 1 DECAL, Cover Warning
53 1733503A 1 HINGE, Cover
54 1733749A 4 GUSSET, Support Cover
55 1931277 2 NUT, Hex Flange 5/16 - 18
tionItem Qt
Note
Footnotes:
Note* Not a serviceable part.
Manual No. 710288338" & 42" Twin Bag Catcher
7
TP 400-5414-IR-AT-N
Parts Manual fo
r
38" & 42" Twin Bag Catcher
IT IS THE POLICY OF BRIGGS & STRATTON CORP. TO IMPROVE ITS
PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO.
WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD
IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION
TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED
Briggs & Stratton Yard Power Products Group
535 Macon Road
McDonough, GA, 30253 U.S.A.
800-935-2967
www.snapper.com
Copyright © 2008
Milwaukee, WI USA. All Rights Reserved
Briggs & Stratton Corporation
Manual No. 7102883
Revision IR,
TP 400-5414-IR-AT-N
9/2/2008
Loading...