Additive Parts Group ............................................................................................................................................
Electrical Controls Group .....................................................................................................................................
Frame Group ........................................................................................................................................................
Front Windshield Group .......................................................................................................................................
Glass Door Group ................................................................................................................................................
Rear Windshield Group ........................................................................................................................................
Roof Group ...........................................................................................................................................................
10
12
14
16
Torque Specification Chart ..................................................................... Inside Back Cover
4
6
8
Additive Parts Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
1\4281apg
The above parts group applies to the following Mfg. Nos.:
Door window glass left 1*1
Door window glass right 2*1
Sealing tube profile 31721325SM4.4m
Door hingle bottom left 4*1
Door hinge bottom right 5*1
Door hinge top left 6*1
Door hinge top right 7*1
Door strap left 8*1
Door strap right 9*1
PVC - disk 101721432SM1
PVC - disk with screw M8x30 111721435SM5
Rubber washer 121721427SM5
Rubber washer with neck 131721428SM5
Shim disk M8 141732656SM5
Stop nut M8 151732648SM6
Cover cap dm8 161721402SM6
Pneumatic spring 320mm300N w/end-damp 171721376SM1
Lock plate for complete glass door left 181721374SM1
Lock plate for complete glass door right 191721375SM1
Door handle with lockable latch 201721377SM1
Stop nut M6 211732647SM1
Rubber shim medium 221721378SM1
Rubber shim large 231721379SM1
Rubber washer with neck large 241721380SM1
Rubber washer with neck small 251721381SM1
Hexagon head screw M6x20 26*1
Hinge plate screw M6x30 27*1
Countersunk head screw M8x40 28*1
Key 291721387SM1
Shim disk M6 301732655SM2
Turn-catch lock left with cross arm 311721382SM1
Turn-catch lock right with cross arm 321721384SM1
Lock cover left 331721383SM1
Lock cover right 341721385SM1
Door left complete (Includes all ref. nos. except ref. nos. 2, 5, 7, 9, 19, 32 & 34) 351732693SM1
Door right complete (Includes all ref. nos. except ref. nos. 1, 4, 6, 8, 18, 31 & 33) 361732694SM1
Footnotes
NOTE* Not a serviceable part, must order complete door.
The above parts group applies to the following Mfg. Nos.:
When a washer or nut is identified as 1/2”, this is the
Nominal size
second number is present it represent the
When bolt or capscrew is identified as 1/2 - 16 x 2”, this
means the
second number represents the
example, and the final number is the
bolt or screw (in this example 2 inches long).
, meaning the
Nominal size
inside diameter
, or
body diameter
threads per inch
body length
Washer
Lockwasher
Hex Nut
is 1/2 inch; if a
threads per inch
is 1/2 inch; the
(16 in this
of the
The guides and ruler furnished below are designed to
help you select the appropriate hardware and tools.
1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
torques.
b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.
3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.
No
Marks
SAE Grade 2SAE Grade 5SAE Grade 8
in/lbsin/lbs
19
20
27
31
66
76
2.1
2.3
3.1
3.5
7.6810.91216.3
8.61013.61419.0
30
31
43
49
NOTES
3.4
3.5
4.9
5.5
in/lbs
41
43
60
68
420571.2
4.6
4.9
6.8
7.7
Wrench & Fastener Size Guide
1/4
1/4” Bolt or Nut
Wrench—7/16”
5/16
5/16” Bolt or Nut
Wrench—1/2”
3/8
3/8” Bolt or Nut
Wrench—9/16”
7/16
DIA.
7/16” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench (Nut)—11/16”
1/2
DIA.
1/2” Bolt or Nut
Wrench—3/4”
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.