Snapper 1690287 User Manual
Specifications and Main Features
- Model: 38 Tornado Rotary Tiller
- MFG No: 1690287
- Required Accessories:
- Rear Lift Kit
- Electric Lift Kit
- Front Wheel Weights
- Rear Wheel Weights
- Functional parameters:
- Controls: tractor controls (Power Lift Switch and PTO Lever)
- Tiller watch adjustment dispensing shoe skids.
- Tilling recommended engine speed: 3/4 up to full speed.
- Tilling recommended tractor speed: 1 mph (1.6 km/h)
- Safety Features:
- Guards, plates, and any other protective devices are installed
- Controlled power on and off
- Checking routine before the start up
- Maintenance Requirements:
- Lubricate the machine after every 8-25 hours of use.
- After use clean the machines normally.
- Weight: Built with Heavy Duty construction materials for strength and durability
- Tines: Removable and replaceable for wear and tear adjustability.
Frequently Asked Questions
Q: What accessories are used in conjunction with rotary tiller for its operation?
A: The equipments needed are a rear lift kit, while the front wheel weights are essential; the rear wheel weights are recommended for greater grip.
Q: How do I lower and raise the rotary tiller?
A: You push a switch forwards for lowering the rotary tiller and pull the switch backwards for raising which is also located in the tractor.
Q: What action should I take if the rotary tiller tines are not spinning?
A: Determine whether the PTO lever is engaged, or whether the tiller drive belt is slipping.
Q: How deep do I till the soil?
A: In general, till around 5 inches for corn or around two inches deeper than the standard seed planting depth.
Q: Is it possible to use the rotary tiller on steep slopes?
A: It is not advisable; the front part of the slopes should always be tilled up and use a rotary tiller on slopes of no more than 27 percent (15 degrees).
User Manual
Loading...