Snapper 1690074 User Manual
Specifications and Main Features
- Effective Cutting Width: 60 Inches (1.5 m)
- Overall Width: 71 Inches (1.8 m)
- Overall Length: 38 Inches (965 mm)
- Overall Height: 11-1/2 Inches (292 mm)
- Cutting Height: Adjustable; Approximately 1-5/8 to 3 Inches (41 to 76 mm)
- Weight: 282 Pounds (128 kg)
- Input Drive: V-Belt from Electric Clutch on Tractor
- Side Blade Drive: V-Belt with Spring-Loaded Idler Pulley
- Center Blade Drive: Direct from Input Drive
- Blade Arrangement: Three Staggered Overlapping Blades
- Bearings: Needle Bearings with Grease Fittings
- Clutch: On Tractor; Operated by Electrical Switch
- Controls: Lift On Tractor; Operated by Hydraulic Control Lever
- Height Adjustment: Twin Screws on Mower
Frequently Asked Questions
Q: What is the cutting width of the rotary mower?
A: The effective cutting width is 60 inches (1.5 m).
Q: How do I adjust the cutting height?
A: The cutting height is adjustable from approximately 1-5/8 to 3 inches (41 to 76 mm) using twin screws on the mower.
Q: What is the weight of the mower?
A: The weight of the mower is 282 pounds (128 kg).
Q: How is the mower powered?
A: The mower is powered by a V-belt from the electric clutch on the tractor.
Q: Am I able to use the mower without any attachments?
A: No, for the mower to be mounted on the tractor, it needs a hitch for mid-mounted attachments.
Q: What maintenance does the mower require?
A: There should be regular checks aimed at ensuring that all screws, nuts and bolts are tightened while cleaning the underside of grass and dirt build ups. Blades need sharpening as well, but not as frequent as the questions above.
Q: What tires can be fitted on the mower?
A: Rear high flotation tires are very capable of giving you better mowers with traction assisting and stability for slopes.
Q: Is there an hour meter for the mower?
A: The hour meter can be purchased as an optional accessory used in noting the time of use of the mower.
Q: How many blades on the mower?
A: Four mowers used on one tractor have three blades and these blades are staggered one over the other.
Q: What Bearing does the mower uses?
A: Needle bearings with grease fittings are used.
User Manual
Loading...