Snapper 1661-0 User Manual

Questions? Help is just a moment away!

Contact the Local Snapper Service Center

Web: www.snapper.com or www.briggsandstratton.com

Model No. 1661-0 (2700 PSI Pressure Washer) Manual No. 190666GS Revision 1 (07/10/2002)

Owner’s Manual

2700PSI

Pressure Washer

Snapper 2700 PSI Pressure Washer

11

SPECIFICATIONS

Rated Pressure . . . . . 2700 PSI

Flow Rate . . . . . . . . . . 2.5 gallons per minute (gpm)

Detergent . . . . . . . . . . Use detergent approved for

pressure washers

Water Supply

Temperature . . . . . . . Not to exceed 100°F

Automatic Cool . . . . Will cycle when water

Down System reaches 125°-155°F

Shipping Weight . . . . 122 lbs.

GENERAL MAINTENANCE

RECOMMENDATIONS

The pressure washer warranty does not cover items that
have been subjected to operator abuse or negligence. To
receive full value from the warranty, the operator must
maintain the pressure washer as instructed in this manual.

• Some adjustments will need to be made periodically to
properly maintain your pressure washer.

• All maintenance in this manual and the engine owner’s
manual should be made at least once each season.

• Once a year you should clean or replace the spark plug,
clean or replace the air filter and check the spray gun and
nozzle extension assembly for wear. A new spark plug
and clean air filter assure proper fuel-air mixture and
help your engine run better and last longer. Please refer
to your engine owner’s manual for more details.

BEFORE EACH USE

• Check engine oil level.

• Check water inlet screen for damage.

• Check in-line filter for damage.

• Check high pressure hose for leaks.

• Check detergent siphoning tube and filter for damage.

• Check spray gun, nozzle extension, and nozzles for leaks.

• Rinse out garden hose to flush out debris.

PRESSURE WASHER

MAINTENANCE

Check and Clean Inlet Screen

Examine the screen on the water inlet. Clean it if the
screen is clogged or replace it if screen is damaged.

Check High Pressure Hose

The high pressure hose can develop leaks from wear,
kinking, or abuse. Inspect the hose each time before using
it. Check for cuts, leaks, abrasions or bulging of cover,
damage or movement of couplings. If any of these
conditions exist, replace the hose immediately.

WARNING! Never repair a high pressure hose.

Replace it with another hose that exceeds the
maximum pressure rating of your pressure washer.

Check Detergent Siphoning Tube

Examine the filter on the detergent tube and clean if
clogged. The tube should fit tightly on the barbed fitting.
Examine the tube for leaks or tears. Replace the filter or
tube if either is damaged.

Cleaning Detergent Siphoning Tube

If you used the detergent siphoning tube, you must flush it
with clean water before stopping the engine.

• Place the chemical injection siphon/filter in a bucket full
of clean water.

• Attach the black low pressure nozzle.

• Flush for 1-2 minutes.

• Shut off the engine.

IMPORTANT: Simply shutting OFF engine will not
release pressure in the system. When the engine has

shut down, squeeze the trigger on the spray gun to
relieve the pressure in the hose.

Snapper 2700 PSI Pressure Washer

16

EXPLODED VIEW — UNIT