Snapper 7800757 (NSXPV2270E), 7800757, 7800756 (NSXPV2270), 7800756, 7800708 (SXPV2270E) Owner’s Manual
...
Operator's Manual
Model No. Description
78007O7
7800708
7800756
7800757
SPXV2270
SPXV2270E
NSPXV2270
NSPXV2270E
Manual No. 7104292 (Rev. '-')
Thank You for purchasing this quality-built Snapper mower. We're pleased that you placed your
confidence in the Snapper brand. When operated and maintained according to the instructions in this
manual, your Snapper mower will provide many years of dependable service.
This manual contains safety information to make you aware of the hazards and risks associated with
the machine and how to avoid them. This machine is designed and intended only for finish cutting of
established lawns and is not intended for any other purpose. It is important that you read and understand
these instructions thoroughly before attempting to start or operate this equipment. Save these original
instructions for future reference.
Dateof Purchase
Retailer
Retailer's Phone Number
Equipment
Model Number
Serial Number
Engine
Model .Type Code
SNAPPERis a trademark of
Briggs & Stratton Power Products Group, LLC
Milwaukee, WI, USA.
Copyright © 2010, Briggs & Stratton Corporation
Milwaukee, WI, USA. All Rights Reserved.
Tableof Contents
OperatorSafety ................................................................................... 4
Safetyinstructions......................................................................................................................4
SafetyandOperationDecals.......................................................................................................6
Featuresand Controls............................................................................ 8
AssembJy........................................................................................... 9
Operation.......................................................................................... 10
BeforeStarting..........................................................................................................................10
FuelRecommendations.............................................................................................................10
StartingtheMower...................................................................................................................11
Propellingthe Mower...............................................................................................................11
HandleHeightAdjustment........................................................................................................11
CuttingHeightAdjustment........................................................................................................12
MulchingOperation..................................................................................................................12
installingtheDischargeDeflector.............................................................................................12
installingtheGrassBag............................................................................................................13
ChargingtheBattery.................................................................................................................14
MaintenanceReminder.............................................................................................................15
Maintenance ...................................................................................... 16
MaintenanceChart....................................................................................................................16
ChangeEngineOil....................................................................................................................17
ServiceAir Filter.......................................................................................................................17
CheckSafetyInterlockSystem..................................................................................................18
CleanDebrisOffMower............................................................................................................18
DriveControlAdjustment.........................................................................................................19
StorageProcedure....................................................................................................................19
Troubleshooting .................................................................................. 20
Warranties ........................................................................................ 21
Slope Guide....................................................................................... 23
WARNING
It is a violation of California Public Resource Code,Section
4442, to use or operatethe engine on any forest-covered,
brush-covered, or grass-covered land unless the exhaust
system is equippedwith a spark attester, as defined in
Section 4442, maintained in effectiveworking order. Other
states or federal jurisdictions may havesimilar laws.
Contactthe original equipment manufacturer, retailer, or
dealer to obtain a spark arrester designed for the exhaust
system installed on this engine.
WARNING
Batteryposts, terminals and relatedaccessoriescontain
lead and leadcompounds, chemicals known to the State
of California to causecancer and birth defects or other
reproductive harm. Wash hands after handling.
WARNING
Engineexhaust, some of its constituents, and certain
vehicle components contain or emit chemicals known to
the State of California to causecancer or other reproductive
harm.
OperatorSafety
,L_ WARNING:This powerful cutting machine is capable of amputating handsand feet and can throw objects
PROTECTION FOR CHILDREN
Tragic accidents canoccur if the operator is not alert to
the presenceof children. Children are oftenattracted to
the machineand the mowing activity. Never assumethat
children will remain whereyou lastsaw them.
1. KEEPchildren out of the mowing area and under the
watchful careof a responsibleadult other than the operator.
2. DONOTallow children in yard when machine is operated
andturn machineOFFifanyoneentersthe area.
3. DONOTallow pre-teenagechildren to operate machine.
4.ALLOW only responsibleadults & teenagerswith mature
judgment under close adult supervision to operate machine.
5. DONOTpull mower backwards unless absolutely
necessary.LOOKandSEEbehind and down for children,
pets and hazardsbeforeand while backing.
6. USEEXTRACAREwhen approaching blind corners,
shrubs, trees, or other objects that may obscurevision.
SLOPEOPERATION
1. Slopesarea major factor relatedto slip and fall
accidents,which can result in severeinjury. All slopes
require extra caution. If you feel uneasyon a slope, DONOT
mow it.
2. Mow across slopes, never up-and-down. Exercise
extremeCAUTIONwhenchanging directions on slopes. DO
NOTmow steep slopes or other areas where stability or
traction is in doubt. Referto the Slope Guideat the back of
this manual.
3. Useextra carewith grass catchers or other attachments;
these affect the handling and the stability of the machine.
PREPARATION
1. Read,understand, and follow instructions and warnings
inthis manualand on the mower, engineand attachments.
Knowthe controls and the proper useof the mower before
starting.
2. Only mature, responsible persons shall operatethe
machine and only after proper instruction.
3. Data indicatesthat operatorsage 60 and above,are
involved in a large percentageof mower-related injuries.
Theseoperators should evaluatetheir ability to operate the
mower safely enough to protect themselvesand others
from serious injury.
4. Handlefuel with extra care. Fuelsareflammable and
vapors are explosive. Useonly an approved fuel container.
DONOTremovefuel cap or add fuel with engine running.
that can cause injury and damage! Failureto comply with the following SAFETYinstructions could result in
serious injury or death to the operator or other persons.Theowner of the machine must understand these
instructions and must allow only persons who understandthese instructions to operate machine. Each
personoperating the machine must be of sound mind and body and must not be under the influence of any
substance,which might impair vision, dexterity or judgment. If you haveany questions pertaining to your
machinewhich your dealer cannotanswer to your satisfaction, contact Customer Service (1-800-317-7833
or www.snapper.com).
PREPARATION
(Continued FromPreviousColumn)
Add fuel outdoors only with enginestoppedand cool. Clean
spilled fuel and oil from machine. DO NOTsmoke.
5. Checkthe areato bemowed and removeall objects such
as toys, wire, rocks, limbs and other objects that could
cause injury if thrown by bladeor interfere with mowing.
Also notethe location of holes, stumps, and other possible
hazards.
6. Keeppeople and pets out of the mowing area.
Immediately, STOPBlade,Stop engine and Stop mower if
anyone enters the area.
7. Checkshields, deflectors, switches, blade controls and
other safety devicesfrequently for proper operation and
location.
8. Make sureall safety decalsare clearly legible. Replaceif
damaged.
9. Protectyourself when mowing and wear safetyglasses,
long pants and substantial footwear. DONOTmow
barefootedor with sandals.
10. Know how to STOPbladeand engine quickly in
preparationfor emergencies.
11. Use extra carewhen loading or unloading the machine
into a trailer or truck.
12. Checkgrass catchercomponents frequently for signs of
wear or deterioration and replaceas neededto prevent inju-
ry from thrown objects going through weak or torn spots.
SAFEHANDLINGOFGASOLINE
To avoid personal injury or property damage,use extreme
care in handling gasoline. Gasolineis extremely flammable
and the vapors are explosive.
1. Extinguish all cigarettes, cigars, pipes and other sources
of ignition.
2. Use only anapprovedfuel container.
3. DONOTremovefuel cap or add fuel with the engine
running. Allow the engineto cool before refueling.
4. DONOTrefuel the machine indoors.
5. DONOTstore the machineor fuel container inside where
there is an openflame, spark or pilot light such as on a
water heater or other appliances.
6. DONOTfiii fuel containers inside a vehicle or on a
truck or trailer bed with a plastic liner. Always placethe
containers on the ground away from the vehicle before
filling.
4 www.snapper.com
OperatorSafety
SAFE HANDLING OF GASOLINE
(ContinuedFromPreviousPage)
7. Removegas-poweredequipment from the vehicle or
trailer and refuelit on the ground. If this is not possible,
then refuelequipment using a portable container, rather
than a gasoline dispenser nozzle.
8. DONOTstart gas poweredequipment in enclosed
vehicles or trailers.
9. Keepthe nozzlein contact with the rim of the fuel tank or
container opening at all times until fueling is complete. DO
NOTusea nozzle lock-open device
10. If fuel is spilled on clothing, change clothing
immediately.
11. DONOToverfill a fuel tank. Replacefuel cap and tighten
securely.
OPERATION
1. DONOTput hands or feet near or under rotating parts.
Keepclearof discharge areawhile engine is running.
2. STOPenginewhen crossing gravel drives, walks, or
roads, and under anyconditions where thrown objects
might be a hazard.
3. Mow only in daylight or good artificial light.
4. DONOToperatemower while under the influence of
alcohol or drugs.
5.After striking aforeign object or if mower vibrates
abnormally, STOPthe engine, disconnect and securespark
plug wire. inspect the mower for anydamageand repair the
damagebeforestarting.
6. DONOTmow near drop otis, ditches or embankments.
Operatorcould lose footing or balance.
7. STAYALERTfor holesandother hidden hazards.Tail
grass can hide obstacles. Keepawayfrom ditches, wash-
outs, culverts, fences and protruding objects.
8. DONOTmow on wet grass. Always be sure of your
footing. Keepa firm hold on the handleand walk, neverrun.
Slipping could cause injury.
9.ALWAYSstay behind handlewhen engine (motor) is
running.
10. DONOTleavethe machinewith the engine run-
ning. STOPBLADEand STOPENGINEbefore leaving the
operators position for any reason.
11. Beforecleaning,repairing or inspecting make cer-
tain engine,blade and all moving parts haveSTOPPED.
Disconnectandsecure spark plug wire awayfrom plug to
prevent accidentalstarting.
12. STOPengineandwait until the bladecomes to
completeSTOPbefore removing grass bag and/or clearing
grass.
13. DONOToperatemower without the entire grass
catcher, rear guard, or other safety devices in placeand
working. DO NOTpoint discharge at people, passing cars,
windows or doors.
OPERATION
(ContinuedFromPreviousColumn)
14. DONOTdischarge material against a wail or
obstruction. Material may ricochet back towards the
operator.
15. Slow down beforeturning.
16. Watchout for traffic when near or crossing roadways.
17. DONOToperateengine in enclosedareas. Engine
exhaust gasescontain carbon monoxide, a deadly poison.
18. Onlyuse accessoriesapproved by the manufacturer.
See manufacturer's instructions for proper operation and
installation of accessories.
MAINTENANCE AND STORAGE
1. DONOTstore mower or fuel container inside where
fumes may reachan open flame, sparkor pilot light such
as in a water heater,furnace, clothes dryer or other gas
appliance. Allow engine to cool before storing machine in
an enclosure. Store fuel container out of reach of children
in awell ventilated, unoccupied building.
2. Keepmower and enginefree of grass, leavesor excess
greaseto reducefire hazard and engineoverheating.
3. Whendraining fuel tank, drain fuel into an approved
container outdoors and awayfrom open flame.
4. Keepall bolts, especially bladebolts, nuts and screws
properly tight. Checkthat all cotter pins are in proper
position.
5. Alwaysprovide adequateventilation when running
engine. Engineexhaust gasescontain carbon monoxide, a
deadly poison.
6. Serviceengine and makeadjustments only when engine
is stopped. Removedsparkplug wire from spark plug and
secure wire awayfrom spark plug to prevent accidental
starting.
7. DONOTchange engine governor speedsettings or
overspeed engine.
8. Checkgrass bag assembly frequently for wear or dete-
rioration to avoid thrown objects and exposureto moving
parts. Replacewith new bag if loose seamsor tears are evi-
dent. Replaceslider or bagadapter if broken or cracked.
9. Mower bladesare sharp and can cut. Wrap the bladesor
wear heavy leathergloves and useCAUTIONwhen handling
them.
10. DONOTtest for spark by grounding spark plug next to
spark plug hole; spark plug could ignite gas exiting engine.
11. Havemachine serviced by an authorized dealerat least
once a year and havethe dealer install any new safety
devices.
12. Use only factory authorized replacement parts or like
parts when making repairs.
OperatorSafety
Safety and OperationDecals
Readingthis manual and the safetyinstructions it contains
will provide the basic knowledge necessaryto operatethis
mower safely and effectively. However,severalsafety and
operation decals havealso been placedon the mower as
a reminder of this important information during operation.
Part No. 7104745
Thedecalsnoted below are locatedon the mower. Thesafety
warnings and operation instructions they contain should
be carefully read,understood, andfollowed. Not following
theseimportantwarningsand instructionscan resultin
seriousbodilyinjuryor death.
If any of these decalsare lost or damaged, replacethem
immediately. Contactyour dealer for replacementdecals.
Mower Run
Mower Stop
Part No. 7104746
SafetyWarnings
Part No. 7101394
KeepHandsand FeetAway
Part No. 7013010
Mower Start
PartNo.7104747
DriveControl
PartNo.7104744
6 www.snapper.com
Explanationof SafetyDecals
OperatorSafety
A. WARNING:Avoid Serious injury or Death
Readthe operator's manualbefore attempting to
operatethe mower.
Mow across slopes, not up or down.
®
®
Explanationof OperationDecals
To avoid injury to others, do not mow when
others, especiallychildren, are around.
To reducethe potential for fire, wait at least2
minutes before refueling.
B. DANGER:Amputation and Thrown Object Hazard.
To avoid serious injury or death, keep handsand
feet away from the mower deck at all times during
operation.
_ To avoid injury from thrown objects, do not
"-?::i:_":_operatethe mower unless all mulching, discharge,
or bagging components are in their proper place.
C. DANGER:KeepHandsand FeetAway.
D. WARNING:Guardor EntireGrass CatcherMust Be
installed BeforeOperating Mower.
7,04747_
A. Drive Control
• Pushdrive control forward to propelmower. Push the
drive control further forward to increaseground speed.
B. Mower Start
1. Squeezeblade control against drive control, and pull
drive control aii the way back.
2. Turn ignition key (SPXV2270E,NSPXV2270E)or pull
starter rope handleto start mower.
C. Mower Run
• Squeezebladecontrol againstdrive control.
D. Mower Stop
• Releasebladecontrol.
• Enginewill stop.
Featuresand Controls
IMPORTANT
Thefigures and illustrationsin this manual are provided
for referenceonly and may differ from your specific model.
Contactyour dealer if you havequestions.
(b
/
A.
B.
C.
D.
E.
8 www.snapper.corn
Oil Fill Capand Dipstick F.
FuelFillerCap G.
Mulching Cover H.
Cutting Height Adjust Lever I.
BatteryChargePort (SPXV2270E, J.
NSPXV2270E)
BladeControl (2)
Drive Control (2)
ignition Switch (SPXV2270E,NSPXV2270E)
Starter Rope Handle
MaintenanceReminder
Assembly
Unpackthe
1.
Cut all four corners of the box from top to bottom.
2,
Removeaii packing materials from the mower.
3.
Locate and identify the items included with the mower:
• Mulching plug (A, Figure 1 - installed)
• Grass bag(B)
• Battery charger(C - SPXV2270E,NSPXV2270E)
• Side dischargedeflector (D)
• Operator's manual (E)
Mower
d
Figure2:Raisingthehandleassembly
Figure1:Itemsincluded
Raisethe HandleAssembly
1. Loosen, but do not remove,the knobs (A, Figure 2) on
both sides of the upper handle.
2. Unfold the upper handleso that it is aligned with the
lower handle,and tighten the upper knobs.
3. Remove the handle knobs, washers andcarriagebolts
from the lower handle (B).
4. Raisethe lower handle,aligning it with one of the three
sets of holes in the handlebracket. (Most userswill pre-
fer the middle position). Replacethe hardware removed
in Step 3, tightening securely.
Set Upthe Starter Rope Handle
1. Squeezethe bladecontrol (A, Figure 3) against the
drive control (B).
NOTE.The blade control and drive control can be operated
from either side.
2. Pull the starter rope handle(C) out of the engine to the
rope guide (D). Hook the starter rope into the rope guide
(it might be a tight fit).
Figure3.Starterropehandle
Operation
BeforeStarting
1. Checkthe guards, deflectors, grass bag, and coversto
make sure all are in placeand securely tightened.
2. Checkthe blade control (A, Figure 4) and drive control
(B) to insure they work freely.
Figure4:Mowercontrols
.
Checkthe cutting height. Adjust to the desiredheight.
Refer to the section entitled 'Cutting Height Adjustment'.
4.
Checkthe engine oil:
• Make sure the mower is on a level surface.
• Cleanthe oil fill areaof any debris.
• Removethe dipstick (A, Figure 5) and wipe with a
cleancloth.
• insert andtighten the dipstick.
• Removethe dipstick and check the oil level. It should
be at the top of the full indicator (B) on the dipstick.
• If low, add oil (Briggs & Stratton warranty-certified
SAE30lawnmower oil is recommended) slowly into the
engine oil fill. Do notoverfill. After adding oil, wait one
minute and recheckthe oil level.
• Replaceand tighten the dipstick.
5. Add fuel to the tank:
• Make sure the mower is outside, where fumes can
safely dissipate.
• Removethe fuel fill cap (C, Figure 5).
• Fill the tank with fuel. Referto the section entitled 'Fuel
Recommendations'.To allow for expansion of the fuel,
do not fill abovethe bottom of the filler neck (B).
• Reinstallthefuel fill cap.
6. Cleanthe exterior surfaces of the cutting deck and
engine of any accumulation of spilled fuel, dirt, grass,
oil, etc. Keepthe engine air intakescreenand cooling
fins clear at all times.
7. Chargethe battery. Referto the section entitled
"Charging the Battery".
FuelRecommendations
Fuel mustmeet these requirements:
• Clean,fresh, unleaded gasolinewith
• A minimum of 87 octane / 87AKI (90 RON).
• Gasolinewith up to 10% ethanol (gasahol) or up to 15%
MTBE(methyl tertiary butyl ether) is acceptable.
• CAUTION:DONOTuse unapproved gasoline, suchas E85.
Do not mix oil in gasoline or modify the engineto run on
alternative fuels. This wiii damagethe engine components
and void the engine warranty.
Theengineon this equipment is certified to operateon
gasoline. Theemissions control systemfor this engine is EM
(Engine Modifications).
High Altitude
At altitudes over 5,000 feet (1524 meters), a minimum 85
octane/85AKi (89 RON)gasoline is acceptable.To remain
emissions compliant, high altitude adjustment is required.
Operationwithout this adjustment will cause decreased
performance, increasedfuel consumption, and increased
emissions.
Operationof the engineat altitudes below 2,500 feet (762
meters) with the high altitude kit is not recommended.
IMPORTANT
Thefigures and illustrations in this manualare provided
for referenceonly and may differ from your specific model.
Contactyour dealer if you havequestions.
Figure5:0il andfuelfill
iMPORTANTMower is shippedwithoutoil in engine.
Failure to add oil before startingwill result in engine
damage.
10 www.snapper.com
Starting the Mower
Theengineon this mower is equipped with a ReadyStart®
system, which features a temperature-controlled automatic
choke, it does not havea manual choke or a primer.
1. Squeezethe bladecontrol (A, Figure 6) against the
drive control (B).
2. Pull the drive control all the way backto the neutral
position.
NOTEThe blade control and drive control can be operated
from either side.
3. Turn the ignition key (C, SPXV2270E,NSPXV2270E)or
pull the rope start handle (D) to start the engine.
4. To stop the engine (andblade), releasethe blade
control.
5. After the engine starts, allow a brief warm-up until the
engine runs smooth before beginning mower operation.
Operation
Figure7:Prope//ingthemower
WARNING
To prevent unauthorized starting, always removethe
ignition key when leavingthe mower unattended.
HandleHeight Adjustment
,A
/
Figure6.Startingthemower
PropellingtheMower
1. Start the engine.
2. Begin slowly pushing the drive control (A, Figure 7)
forward to propel the mower. Forward speed can be
increased by pushing the drive control further forward.
NOTEThe drive control canbe operated from either side.
IMPORTANT:Upon initial use, the drive control may have
to be adjusted. Referto the section entitled "Drive Control
Adjustment".
WARNING
DONOTattempt any maintenance,adjustmentsor service
with engine and blade running. STOPengine and blade.
Removestarter insert. Disconnectspark plug wire and
secure awayfrom spark plug. Engineand components
are HOT.Avoid serious burns, allow sufficient time for all
components to cool.
Forgreater operator comfort, the height of the mower handle
can be adjusted.
1. Remove the handle knobs, washersand carriagebolts
from the lower handle (A, Figure 8).
NOTE:Donot removethe lower set of handle hardware (C).
2. Align the handle assemblywith one of the three handle
height adjustment holes (B).
3. Replacethe hardware removed in Step 1, tightening
securely.
Stoppingthe Mower
1. Stop forward motion of the mower by pulling the drive
control all the way back.
2. Stop the engine and blade by releasingthe blade
control.
3. Remove the ignition key from the control console
(SPXV2270E,NSPXV2270E).
Figure8:Adjustingthehand/eheight
11
Operation
Cutting HeightAdjustment
WARNING ,A
DONOTattempt any maintenance,adjustments or service
with engine and blade running. STOPengine and blade.
Removestarter insert. Disconnectspark plug wire and
secure awayfrom spark plug. Engine and components
are HOT.Avoid serious burns, allow sufficient time for all
components to cool.
1.25 in 4.00 in
Pull the cutting height adjust lever (A, Figure 9)
outward, and move to the desiredcutting height. The
highest cutting position is Notch 9, and the lowest
cutting position is Notch 1 (Figure 10). The lever will
set all wheels to the samecutting height.
Figure10:Cuttingheightsettings(approximate)
Installingthe DischargeDeflector
WARNING
DONOTattempt any maintenance,adjustmentsor service
with engine and blade running. STOPengine and blade.
Removestarter insert. Disconnectspark plug wire and
secure awayfrom spark plug. Engineand components
are HOT.Avoid serious burns, allow sufficient time for all
components to cool.
1. Raisethe mulching cover (A, Figure 11).
2. Install the deflector (B) to the deck under the mulching
cover, making sure that the locking tabs on the deck (C)
go through the slots in the deflector (B).
3. Lowerthe mulching cover against the deflector.
Figure9:Adjustingcuttingheight
Mulching Operation
For best mulching results, cut up to a maximum of 1/3 of
grass length and recycle ONLYwhen grass is dry.
1. Make sure the discharge deflector and grass bag are
removed, and the mulching plug is installed.
2. Set the cutting height adjustlever in the highest cutting
position (Notch 9).
3. Proceed mowing slowly. Graduallylower the cutting
height to obtain the best combination of cutting and
mulching performance. Cutting too much grass in one
pass, or cutting wet heavygrass maycause clumping or
plugging of the mower deck.
12 www.snapper.corn
Figure11:Insta//ingthedischargedeflector
nstallingthe GrassBag
WARNING ,A
DONOTattempt any maintenance,adjustments or service
with engine and blade running. STOPengine and blade.
Removestarter insert.Disconnectspark plug wire and
secure awayfrom spark plug. Engine and components
are HOT.Avoid serious burns, allow sufficient time for all
components to cool.
Important: The mulching plug must be removed only
when bagging is desired, and must be replaced as soon as
bagging operations are completed.
1. Raisethe rear discharge door (A, Figure 12).
2. Remove the mulching plug (B) from the rear discharge
chute.
Operation
Figure12:Removingthemu/chingp/ug
.
Holding the grass bag handle (A, Figure 13), install the
grass bag onto the mower, making sure that the grass
bag hooks (B) are hookedonto the rear door pivot rod
(c),
Figure13:Insta//ingthegrassbag
WARNING
Grass Catcherbags are made of woven fabric, and are
subject to deterioration andwear during normal usage.
Checkcondition of bag beforeeach use. immediately
replaceworn or damagedcatcher bagswith only bags
recommended bythe manufacturer. The grass catcher
is optional equipment on some models.
13
Chargingthe Battery
The batteryin this mower is sealedand maintenancefree,
and requires no serviceother than charging. If the battery
will not accept a charge, bring the mower to an authorized
servicecenterfor service.
1. Using the supplied charger, plug the charger connec-
tor into the battery charge port (A, Figure 14). Plug
the charger into awall outlet and chargethe battery
for 12-24 hours. (Longer periods will not damagethe
battery.)
Important: Use only the charger supplied with the mower to
chargethe battery. Using a different charger may damage
the battery and/or mower.
2. When charging is complete, unplug and storethe
charger.
Operation
Figure14:Batterychargeport
eep allsparks, flame and fire awayfrom
I chargingthe battery. Never use "BOOST"£ g2;
Ithe battery.
14 www.snapper.com
Operalion
Mainlenance Reminder
The maintenancereminder (A, Figure15) provides timely
reminders of important maintenanceitems. It has six
display modes:
Total Hours
Displays total hours mower hasbeen operated.This is the
default screen.
Trip Hours
To display:
Press the 'Mode' button (B) until the 'Trip Hours' screen
is displayed.
To reset:
Press and hold the 'Reset' button (C) for more than 3
seconds.
Clock
To display:
Press the 'Mode' button until the 'Clock' screen is
displayed.
To set:
1. Pressand hold the 'Mode' button for more than 3
seconds. Thehour display will flash.
2. Pressthe 'Reset' button to set the correct hour.
3. Press
flash.
4. Press
5. Press
seconds
Change Oil
The 'ChangeOil' icon (D) will appear after the first 5 hours
(total hours) of operation, then after every25 hours of oper-
ation thereafter. This indicates it is time to changethe oil. Be
sure to follow the procedures outlined in this manual.
To reset:
1. Pressthe 'Mode' button until the 'Change Oil' screen
is displayed. (The iconwill flash.)
2. Pressand hold the 'Reset' button for more than 3
seconds.
the 'Mode' button. The minutes display will
the 'Reset' button to set the correct minutes.
and hold the 'Mode' button for more than 3
to savethe set time.
Spark Plug
The'Spark Plug' icon (E) will appear every 50 hours (total
hours) of operation. This indicates it is time to changethe
spark plug. Be sureto follow the procedures outlined in this
manual.
To reset:
1. Pressthe 'Mode' button until the 'Spark Plug' screen
is displayed. (The icon will flash.)
2. Pressand hold the 'Reset' button for more than 3
seconds.
NOTE:if not reset, the 'Spark Plug' icon will automatically
disappearafter 3 operating hours.
Air Filter
The'Air Filter' icon (F) will appearevery 50 hours (total
hours) of operation. This indicates it is time to changethe
air filter. Be sure to follow the procedures outlined in this
manual.
To reset:
1. Pressthe 'Mode' button until the 'Air Filter' screen is
displayed. (Theicon will flash.)
2. Pressand hold the 'Reset' button for more than 3
seconds.
NOTE;If not reset,the 'Air Filter' icon will automatically
disappearafter 3 operating hours.
Change oil Spark plug Air filter
@ ® ®
NOTEIf not reset,the 'ChangeOil' icon will automatically
disappearafter 3 operating hours.
Figure15:Maintenancereminder
15
Loading...