Snapper 7800779, 7800776, 13037229, 13037129 Owner’s Manual

Operator's Manual

Model No. Description

7800776 7800779

SPXV2270HW

NSPX V22 70H W

Manual No. 7104756 (Rev. '-')

Thank You for purchasing this quality-built Snapper mower. We're pleased that you placed your confidence in the Snapper brand. When operated and maintained according to the instructions in this

manual, your Snapper mower will provide many years of dependable service.

This manual contains safety information to make you aware of the hazards and risks associated with the machine and how to avoid them. This machine is designed and intended only for finish cutting of

established lawns and is not intended for any other purpose. It is important that you read and understand these instructions thoroughly before attempting to start or operate this equipment. Save these original

instructions for future reference.

Dateof Purchase

Retailer

Retailer's Phone Number

Equipment

Model Number

Serial Number

Engine

Model .Type Code

SNAPPERis a trademark of Briggs & Stratton PowerProductsGroup, LLC

Milwaukee, WI, USA.

Tableof Contents

OperatorSafety ................................................................................... 4

Safetyinstructions......................................................................................................................4

SafetyandOperationDecals.......................................................................................................6

Featuresand Controls............................................................................ 8

AssembJy........................................................................................... 9

Operation.......................................................................................... 10

BeforeStarting..........................................................................................................................10

FuelRecommendations.............................................................................................................10

StartingtheMower...................................................................................................................11

Propellingthe Mower...............................................................................................................11

HandleHeightAdjustment........................................................................................................11

CuttingHeightAdjustment........................................................................................................12

MulchingOperation..................................................................................................................12

installingtheDischargeDeflector.............................................................................................12

installingtheGrassBag............................................................................................................13

MaintenanceReminder.............................................................................................................14

Maintenance ...................................................................................... 15

MaintenanceChart....................................................................................................................15

ChangeEngineOil....................................................................................................................16

ServiceAir Filter.......................................................................................................................16

CheckSafetyinterlockSystem..................................................................................................17

CleanDebrisOffMower............................................................................................................17

DriveControlAdjustment.........................................................................................................18

StorageProcedure....................................................................................................................18

Troubleshooting .................................................................................. 19

Warranties ........................................................................................ 20

Slope Guide....................................................................................... 23

WARNING

It is aviolation of California Public ResourceCode,Section

4442, to use or operatethe engine on any forest-covered,

brush-covered, or grass-covered land unless the exhaust system is equippedwith a spark attester, as defined in Section 4442, maintained in effectiveworking order. Other states or federal jurisdictions may havesimilar laws.

Contactthe original equipment manufacturer, retailer, or dealer to obtain a spark arrester designed for the exhaust system installed onthis engine.

WARNING

Batteryposts, terminals and related accessoriescontain

lead and lead compounds, chemicals known to the State of California to causecancer and birth defects or other

reproductive harm. Wash hands after handling.

WARNING

Engineexhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of Californiato causecanceror other reproductive

harm.

OperatorSafety

,L_ WARNING:This powerful cutting machine is capable of amputating handsand feet and can throw objects

PROTECTION FOR CHILDREN

Tragic accidents canoccur if the operator is not alert to the presenceof children. Children are often attracted to the machineand the mowing activity. Neverassumethat

children will remain where you lastsaw them.

1. KEEPchildren out of the mowing area and under the

watchful careof a responsible adult other than the operator.

2. DONOTallow children in yard when machine is operated andturn machineOFFifanyoneentersthe area.

3. DONOTallow pre-teenagechildren to operate machine.

4.ALLOW only responsible adults & teenagerswith mature

judgment under close adult supervision to operate machine.

5. DONOTpull mower backwardsunless absolutely necessary.LOOKandSEEbehind and down for children, pets and hazards before and while backing.

6. USEEXTRACAREwhen approaching blind corners, shrubs, trees, or other objects that may obscure vision.

SLOPEOPERATION

1. Slopesare a major factor relatedto slip and fall accidents,which can result in severeinjury. All slopes

require extra caution. If you feel uneasyon a slope, DONOT mow it.

2. Mow across slopes, neverup-and-down. Exercise extremeCAUTIONwhenchanging directions on slopes. DO

NOTmow steep slopes or other areaswhere stability or

traction is in doubt. Referto the Slope Guideat the back of this manual.

3. Useextra carewith grass catchers or other attachments;

these affect the handling and the stability of the machine.

PREPARATION

1. Read,understand, and follow instructions and warnings inthis manualand on the mower, engineand attachments. Knowthe controls and the proper useof the mower before starting.

2. Only mature, responsible persons shall operatethe machine and only after proper instruction.

3. Data indicatesthat operators age 60 and above,are involved in a large percentageof mower-related injuries.

Theseoperators should evaluatetheir ability to operatethe

mower safely enough to protect themselves and others

from serious injury.

4. Handlefuel with extracare. Fuelsareflammable and

vapors are explosive. Useonly an approvedfuel container.

DONOTremovefuel capor add fuel with engine running.

that can causeinjury and damage! Failureto comply with the following SAFETYinstructions could result in

serious injury or deathto the operator or other persons.Theowner of the machine must understand these instructions and must allow only persons who understandthese instructions to operate machine.Each personoperating the machine must beof sound mind and body and must not be under the influence of any substance,which might impair vision, dexterity or judgment. If you haveany questions pertaining to your machinewhich your dealer cannot answer to your satisfaction, contact Customer Service (1-800-317-7833 or www.snapper.com).

PREPARATION

(Continued FromPreviousColumn)

Add fuel outdoors only with engine stopped and cool. Clean spilled fuel and oil from machine. DONOTsmoke.

5. Checkthe areato bemowed and removeall objects such as toys, wire, rocks, limbs and other objects that could

cause injury if thrown by bladeor interfere with mowing. Also notethe location of holes, stumps, and other possible

hazards.

6. Keeppeople and pets out of the mowing area. Immediately, STOPBlade,Stop engine and Stop mower if

anyone enters the area.

7. Checkshields, deflectors, switches, blade controls and

other safety devices frequently for proper operation and

location.

8. Make sure all safety decals are clearly legible. Replaceif

damaged.

9. Protectyourself when mowing and wear safetyglasses, long pants and substantial footwear. DONOTmow barefootedor with sandals.

10. Know how to STOPbladeand engine quickly in preparationfor emergencies.

11. Use extra carewhen loading or unloadingthe machine into a trailer or truck.

12. Checkgrass catchercomponents frequently for signs of

wear or deterioration and replaceas neededto prevent inju-

ry from thrown objects going through weak or torn spots.

SAFEHANDLINGOFGASOLINE

To avoid personal injury or property damage,use extreme care in handlinggasoline. Gasolineis extremelyflammable and the vapors are explosive.

1. Extinguish all cigarettes, cigars, pipes and other sources

of ignition.

2. Use only anapprovedfuel container.

3. DONOTremovefuel cap or add fuel with the engine running. Allow the engineto cool before refueling.

4. DONOTrefuel the machine indoors.

5. DONOTstore the machineor fuel container inside where

there is an open flame, spark or pilot light such as ona water heater or other appliances.

6. DONOTfiii fuel containers inside a vehicle or on a

truck or trailer bed with a plastic liner. Always place the containers on the ground awayfrom the vehicle before filling.

4 www.snapper.com

OperatorSafety

SAFE HANDLING OF GASOLINE

(ContinuedFromPreviousPage)

7. Removegas-poweredequipment from the vehicle or trailer and refuelit on the ground. If this is not possible, then refuelequipment using a portablecontainer, rather than a gasolinedispenser nozzle.

8. DONOTstart gas poweredequipment in enclosed vehicles or trailers.

9. Keepthe nozzlein contact with the rim of the fuel tank or

container opening at all times until fueling is complete. DO NOTusea nozzle lock-open device

10. If fuel is spilled on clothing, change clothing

immediately.

11. DONOToverfill a fuel tank. Replacefuel cap and tighten

securely.

OPERATION

1. DONOTput hands or feet near or under rotating parts.

Keepclearof discharge areawhile engine is running.

2. STOPenginewhen crossing gravel drives, walks,or

roads, and under anyconditions where thrown objects might be a hazard.

3. Mow only in daylight or good artificial light.

4. DONOToperatemower while under the influence of

alcohol or drugs.

5.After striking aforeign object or if mower vibrates

abnormally, STOPthe engine,disconnect and securespark plug wire. inspect the mower for anydamageand repair the

damagebeforestarting.

6. DONOTmow near drop otis, ditches or embankments.

Operatorcould lose footing or balance.

7. STAYALERTfor holesandother hidden hazards.Tail

grass can hide obstacles. Keepawayfrom ditches, wash- outs, culverts, fences and protruding objects.

8. DONOTmow on wet grass. Always be sure of your footing. Keepafirm hold on the handleand walk, neverrun.

Slipping could cause injury.

9.ALWAYSstay behind handlewhen engine (motor) is

running.

10. DONOTleavethe machinewith the enginerun-

ning. STOPBLADEand STOPENGINEbefore leavingthe operators position for any reason.

11. Beforecleaning, repairing or inspecting make cer- tain engine,blade and all moving parts haveSTOPPED.

Disconnectandsecure spark plug wire awayfrom plug to prevent accidentalstarting.

12. STOPengineand wait until the bladecomes to

completeSTOPbeforeremoving grass bag and/or clearing grass.

13. DONOToperatemower without the entire grass

catcher, rear guard, or other safety devices in placeand working. DO NOTpoint discharge at people, passing cars, windows or doors.

OPERATION

(ContinuedFromPreviousColumn)

14. DONOTdischarge material against a wail or obstruction. Material may ricochet back towards the operator.

15. Slow down before turning.

16. Watchout for traffic when near or crossing roadways.

17. DONOToperateengine in enclosedareas. Engine exhaust gasescontain carbon monoxide, a deadly poison.

18. Onlyuse accessoriesapprovedby the manufacturer. See manufacturer's instructions for proper operation and

installation of accessories.

MAINTENANCE AND STORAGE

1. DONOTstore mower or fuel container inside where fumes may reach an open flame, sparkor pilot light such

as in awater heater,furnace, clothes dryer or other gas appliance. Allow engine to cool before storing machine in

an enclosure. Store fuel container out of reachof children

in awell ventilated, unoccupied building.

2. Keepmower and engine free of grass, leavesor excess greaseto reducefire hazardand engine overheating.

3. Whendraining fuel tank, drain fuel into an approved container outdoors and away from open flame.

4. Keepall bolts, especially bladebolts, nuts and screws

properly tight. Checkthat all cotter pins are in proper position.

5. Alwaysprovide adequateventilation when running engine. Engineexhaust gasescontain carbon monoxide, a deadly poison.

6. Serviceengine and makeadjustments only when engine

is stopped. Removedspark plug wire from spark plug and secure wire awayfrom spark plugto prevent accidental starting.

7. DONOTchange engine governor speedsettings or overspeed engine.

8. Checkgrass bagassembly frequently for wear or dete-

rioration to avoid thrown objects and exposureto moving

parts. Replacewith new bag if loose seamsor tears are evi- dent. Replaceslider or bagadapter if brokenor cracked.

9. Mower bladesaresharp and can cut. Wrap the bladesor wear heavy leather gloves and useCAUTIONwhen handling them.

10. DONOTtest for spark by grounding spark plug next to

spark plug hole; spark plug could ignite gas exiting engine.

11. Havemachine serviced by an authorized dealerat least

once a year andhavethe dealer install any new safety devices.

12. Use only factory authorized replacementparts or like

parts when making repairs.

OperatorSafety Safety and OperationDecals

Readingthis manual andthe safety instructions it contains will provide the basic knowledge necessaryto operatethis mower safelyand effectively. However,severalsafety and operation decals have also been placedon the mower as a reminder of this important information during operation.

Part No. 7104745

Thedecalsnoted below are located on the mower. Thesafety warnings and operation instructions they contain should be carefully read, understood, and followed. Not following

theseimportantwarningsand instructionscan result in seriousbodilyinjuryor death.

If any of thesedecals are lost or damaged, replacethem

immediately. Contactyour dealer for replacement decals.

Mower Run

Mower Stop

Part No. 7104746

SafetyWarnings

Part No. 7101394

KeepHandsand FeetAway

Part No. 7013010

Mower Start

PartNo.7104747

DriveControl

PartNo.7104744

6 www.snapper.com

Explanationof Safety Decals

OperatorSafety

A. WARNING:Avoid Serious injury or Death

Readthe operator's manualbefore attempting to operatethe mower.

Mow across slopes, not up or down.

Explanationof Operation Decals

To avoid injury to others, do not mow when others, especiallychildren, arearound.

To reducethe potential for fire, wait at least2 minutes before refueling.

B. DANGER:Amputation and Thrown Object Hazard.

To avoid serious injury or death, keep hands and feet away from the mower deck at all times during

operation.

_ To avoid injury from thrown objects, do not "-?::i:_":_operatethe mower unlessall mulching, discharge,

or baggingcomponents arein their proper place.

C. DANGER:KeepHandsand FeetAway.

D. WARNING:Guardor EntireGrass CatcherMust Be

installed BeforeOperating Mower.

7,04747_

A. Drive Control

• Push drive control forward to propel mower. Push the drive control further forward to increaseground speed.

B. Mower Start

1. Squeezeblade control against drive control, and pull

drive control all the way back.

2. Pull starter rope handleto start mower.

C. Mower Run

• Squeezebladecontrol against drive control.

D. Mower Stop

• Releasebladecontrol.

• Enginewill stop.

Featuresand Controls

IMPORTANT Thefigures and illustrationsin this manual are provided

for referenceonly and may differ from your specific model. Contactyour dealer if you have questions.

B. C. D.

8 www.snapper.corn

Oil Fill Capand Dipstick E. FuelFillerCap F. Mulching Cover G.

Cutting Height Adjust Lever(at eachwheel) H.

BladeControl (2) Drive Control (2)

Starter Rope Handle MaintenanceReminder

Assembly

Unpackthe

Cut all four corners of the box from top to bottom.

Removeall packing materials from the mower.

Locate and identify the items included with the mower:

* Mulching plug (A, Figure 1 - installed) * Grass bag (B) * Side discharge deflector (C) * Operator's manual (D)

Mower

Figure2:Raisingthehand/eassembly

Figure1:Itemsinc/uded

RaisetheHandleAssembly

1. Loosen, but do not remove,the knobs (A, Figure 2) on both sides of the upper handle.

2. Unfold the upper handleso that it is aligned with the lower handle,and tighten the upper knobs.

3. Removethe handle knobs, washers and carriagebolts from the lower handle (B).

4. Raisethe lower handle,aligning it with oneof the three sets of holes in the handle bracket. (Most userswill pre- fer the middle position). Replacethe hardware removed

in Step 3, tightening securely.

Set Upthe Starter Rope Handle

1. Squeezethe bladecontrol (A, Figure 3) againstthe drive control (B).

NOTE.The bladecontrol and drive control can beoperated from either side.

2. Pull the starter rope handle(C) out of the engine to the rope guide ([I). Hookthe starter rope into the rope guide (it might be a tight fit).

Figure3.Starterropehand/e

Operation

Before

Figure4:Mowercontrols

Starting

Checkthe guards, deflectors, grass bag,and coversto make sure all are in place and securelytightened. Checkthe blade control (A, Figure 4) and drive control (B) to insure they work freely.

Checkthe cutting height. Adjust to the desiredheight. Refer to the section entitled 'Cutting Height Adjustment'. Checkthe engine oil:

• Make sure the mower is on a level surface.

• Cleanthe oil fill areaof anydebris.

• Remove the dipstick (A, Figure 5) andwipe with a cleancloth.

• Insert andtighten the dipstick.

• Remove the dipstick and checkthe oil level. It should be at the top of the full indicator (B) on the dipstick.

• If low, add oil (Briggs & Stratton warranty-certified SAE30lawnmower oil is recommended) slowly into the engine oil fill. Do notoverfill. After adding oil, wait one

minute and recheckthe oil level.

• Replaceandtighten the dipstick.

5. Addfuel to the tank:

• Make sure the mower is outside, where fumes can safely dissipate.

• Removethe fuel fill cap (C, Figure 5).

• Fill the tank with fuel. Referto the section entitled 'Fuel Recommendations'.To allow for expansion of the fuel,

do not fill abovethe bottom of the filler neck (D).

• Reinstall the fuel fill cap.

6. Cleanthe exterior surfaces of the cutting deck and engine of any accumulationof spilled fuel, dirt, grass, oil, etc. Keepthe engine air intakescreen and cooling

fins clear at all times.

7. Chargethe battery. Refer to the section entitled "Charging the Battery".

FuelRecommendations

Fuel mustmeet these requirements: * Clean,fresh, unleaded gasolinewith

, A minimum of 87 octane / 87AKI (90 RON). , Gasolinewith up to 10% ethanol (gasahol) or up to 15%

MTBE(methyl tertiary butyl ether) is acceptable.

* CAUTION:DONOTuse unapproved gasoline, such as E85.

Do not mix oil in gasoline or modify the engineto run on alternative fuels. This wiii damagethe engine components and void the engine warranty.

Theengineon this equipment is certified to operateon gasoline. Theemissions control systemfor this engine is EM (Engine Modifications).

High Altitude At altitudes over 5,000 feet (1524 meters), a minimum 85 octane/85AKi (89 RON)gasoline is acceptable.To remain emissions compliant, high altitude adjustment is required.

Operationwithout this adjustment will cause decreased performance, increasedfuel consumption, and increased

emissions. Operationof the engineat altitudes below 2,500 feet (762

meters) with the high altitude kit is not recommended.

IMPORTANT Thefigures and illustrations in this manualareprovided

for referenceonly and may differ from your specific model. Contactyour dealer if you have questions.

Figure5:0il andfuelfill

iMPORTANTMower is shippedwithoutoil in engine. Failureto add oil before startingwill result in engine

damage.

10 www.snapper.com

Starting the Mower

Theengineon this mower is equipped with a ReadyStart® system, which featuresa temperature-controlled automatic choke, it does not have a manual choke or a primer.

1. Squeezethe bladecontrol (A, Figure 6) againstthe drive control (B).

2. Pull the drive control all the way backto the neutral position.

NOTEThe blade control and drive control can be operated from either side.

3. Pull the rope start handle (6) to start the engine.

4. To stop the engine (and blade), releasethe blade control.

5. After the engine starts, allow a brief warm-up until the engine runs smooth before beginning mower operation.

Operation

Figure7:Propellingthemower

HandleHeight Adjustment

| WARNING

DONOTattempt any maintenance,adjustmentsor service with engine and blade running. STOPengine and blade. Removestarter insert. Disconnectspark plug wire and secure awayfrom spark plug. Engineand components are HOT.Avoid serious burns, allow sufficient time for all components to cool.

Figure6:Startingthemower

Propelling the Mower

1. Start the engine.

2. Begin slowly pushing the drive control (A, Figure 7) forward to propel the mower. Forward speed can be increased by pushing the drive control further forward.

NOTEThe drive control canbe operated from either side.

IMPORTANT:Upon initial use,the drive control may have to be adjusted. Referto the section entitled "Drive Control Adjustment".

Stoppingthe Mower

1. Stop forward motion of the mower by pulling the drive control all the way back.

2. Stop the engine and blade by releasingthe blade control.

Forgreater operator comfort, the height of the mower handle can be adjusted.

1. Removethe handle knobs, washersand carriagebolts from the lower handle (A, Figure 8).

NOTE.Donot removethe lower set of handle hardware (C).

2. Alignthe handle assemblywith one of the three handle height adjustment holes (B).

3. Replacethe hardware removed in Step 1, tightening securely.

Figure8:Adjustingthehandleheight

Operation Cutting HeightAdjustment

WARNING ,A

DONOTattempt any maintenance,adjustments or service

with engine and blade running. STOPengine and blade.

Removestarter insert. Disconnectspark plugwire and secure awayfrom spark plug. Engine and components are HOT.Avoid serious burns, allow sufficient time for all components to cool.

1.25 in 4.00 in

Pull the cutting height adjust lever(A, Figure 9) outward, and moveto the desiredcutting height. The highest cutting position is Notch 9, and the lowest cutting position is Notch 1 (Figure 10). Makesure each adjust lever is in the same position so that the mower

will cut level.

Figure9:Adjustingcuttingheight

Figure10:Cuttingheightsettings(approximate)

Installingthe DischargeDeflector

WARNING

are HOT.Avoid serious burns, allow sufficient time for all components to cool.

1. Raisethe mulching cover(A, Figure 11).

2. Install the deflector (B)to the deck under the mulching cover, making sure that the locking tabs on the deck (C) go through the slots in the deflector (B).

3. Lowerthe mulching cover against the deflector.

Mulching Operation

For best mulching results, cut up to a maximum of 1/3 of grass length andrecycle ONLYwhen grass is dry.

1. Make sure the discharge deflector and grass bag are removed, and the mulching plug is installed.

2. Setthe cutting height adjust lever in the highest cutting position (Notch 9).

3. Proceedmowing slowly. Graduallylower the cutting height to obtain the bestcombination of cutting and mulching performance. Cutting too much grass in one pass, or cutting wet heavygrass maycause clumping or plugging of the mower deck.

12 www.snapper.corn

Figure11:Insta//ingthedischargedeflector

nstallingthe GrassBag

WARNING ,A

DONOTattempt any maintenance,adjustments or service

with engine and blade running. STOPengine and blade.

Removestarter insert.Disconnect spark plug wire and

secure awayfrom spark plug. Engine and components are HOT.Avoid serious burns, allow sufficient time for all

components to cool.

Important: The mulching plug must be removed only when bagging is desired, and must be replacedas soon as bagging operations are completed.

1. Raisethe rear discharge door (A, Figure 12).

2. Removethe mulching plug (B) from the reardischarge chute.

Operation

Figure12:Removingthemu/chingp/ug

Holding the grass bag handle (A, Figure 13), install the grass bag onto the mower, making sure that the grass bag hooks (B) are hooked onto the reardoor pivot rod

(c),

Figure13:Insta//ingthegrassbag

WARNING

Grass Catcherbags are madeof woven fabric, and are subject to deterioration and wear during normal usage. Checkcondition of bag before each use. immediately replaceworn or damagedcatcher bagswith only bags recommended bythe manufacturer. The grass catcher is optional equipment on some models.

Operalion

Mainlenance Reminder

The maintenancereminder (A, Figure14) providestimely reminders of important maintenanceitems. It has six display modes:

Total Hours

Displays total hours mower hasbeen operated.This is the default screen.

Trip Hours

To display:

Press the 'Mode' button (B) until the 'Trip Hours' screen is displayed.

To reset:

Press and hold the 'Reset' button (C) for more than 3 seconds.

Clock

To display:

Press the 'Mode' button until the 'Clock' screenis displayed.

To set:

1. Pressand hold the 'Mode' button for more than 3 seconds. Thehour display will flash.

2. Pressthe 'Reset' button to set the correct hour.

3. Press flash.

4. Press

5. Press seconds

Change Oil

The 'ChangeOil' icon (D) will appear after the first 5 hours (total hours) of operation, then after every25 hours of oper-

ation thereafter. This indicates it is time to changethe oil. Be sure to follow the procedures outlined in this manual.

To reset:

1. Pressthe 'Mode' button until the 'ChangeOil' screen is displayed. (The icon will flash.)

2. Pressand hold the 'Reset' button for more than 3 seconds.

the 'Mode' button. The minutes displaywill

the 'Reset' button to setthe correct minutes. and hold the 'Mode' button for more than 3 to savethe set time.

Spark Plug

The'Spark Plug' icon (E) will appear every 50 hours (total hours) of operation. This indicates it is time to changethe spark plug. Besureto follow the procedures outlined in this

manual.

To reset:

1. Pressthe 'Mode' button until the 'Spark Plug' screen is displayed. (The icon will flash.)

2. Pressand hold the 'Reset' button for more than 3 seconds.

NOTE:if not reset,the 'Spark Plug' icon will automatically disappearafter 3 operating hours.

Air Filter

The'Air Filter' icon (F) will appearevery 50 hours (total hours) of operation. This indicates it is time to changethe air filter. Be sureto follow the procedures outlined in this

manual.

To reset:

1. Pressthe 'Mode' button until the 'Air Filter' screen is displayed. (Theicon will flash.)

2. Pressand hold the 'Reset' button for more than 3 seconds.

NOTE;If not reset,the 'Air Filter' icon will automatically disappearafter 3 operating hours.

Change oil Spark plug Air filter

@ ® ®

NOTEIf not reset,the 'ChangeOil' icon will automatically disappearafter 3 operating hours.

Figure14:Maintenancereminder

14 www.snapper.c0rn

MaintenanceChart

Operation

WAeNING

DONOTattempt any maintenance,adjustments or service

with engine and blade running. STOPengine and blade.

Removethe starter insert. Disconnectspark plug wire and

secure awayfrom spark plug. Engine and components are

HOT.Avoid serious burns, allow sufficient time for all com-

ponents to cool. Wearheavy leather gloves when handling or working around cutting blades. Bladesareextremely sharp and can causesevere injury.

ii!i i !!! i!ii i! ! !! !! ! ! !! ! i!! !i iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!iiiiiiiiiiiiii!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!i!

Every8 Hoursor Daily

Checksafety interlock system Cleandebris off mower

Checkmower for loose hardware

See Dealer Annually to

Lubricate mower Checkmower blade **

Checkmower bladestopping time Checkdrive belt

* Whichevercomes first **Check blademore often in regions with sandy soils or

high dust conditions.

Emissions Control

Maintenance, replacement,or repair of the emissions control devicesandsystems may beperformed byany non-road engine repair establishment or individual. However,to obtain "no charge" emissions control service, the work must be performed by afactory authorized dealer.Seethe Emissions Warranty.

i i: ! ! i i! ii !! ! i i i i!i iiiiii iiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

First5 Hours

Changeengineoil

Every8 Hours or Daily ....................

Checkengineoil level

Every25Hoursor Annually *

Cleanengineair filter and pre-cleaner(if equipped) **

Every50 Hoursor Annually *

Changeengineoil Replaceoil filter (if equipped)

Annually

Replaceair filter Replacepre-cleaner(if equipped)

See Dealer Annually to

Inspect muffler and spark arrester (if equipped) Replacespark plug Replacefuel filter (if equipped) Cleanengineair cooling system

* Whichevercomes first **Clean more often in dusty conditions or when airborne

debris is present.

+ 33 hidden pages