SmoothTalker BMUZ650, Mobile X650 4G LTE, BMUX650MSPC User Manual

User Manual

USA

In 2001 SmoothTalker produced the rst digital mobile cellular signal booster
in North America with FCC and ICAN approval. We continue to lead with the
most powerful and intelligent boosters in the world.
Our dynamic adaptive proprietary algorithms make them very network friendly.
We call it STEALTH TECH technology.

Smoothtalker.com

Boosts the outside signal into your vehicle

and the cell phone signal back to the tower.

6 BAND

Mobile Z6 4G LTE

50dB

Wireless Booster High Power

MULTI BAND

stealth

tech

®

Cellular
Signal Booster

RX/TX

MULTI BAND 50dB

50dB

6 BAND

GSM,HSPA,CDMA,LTE, LTE A

Wireless Booster High Power

Band 12,17
Band 13

Band 5
Band 4

Band 2,25

700MHz Upper
850MHz

1700/2100MHz

2G, 3G, 3G+, 4G, 4G+

1900MHz ext

700MHz Lower

1

Contents

All parts shown are not included in all kits.
Please check your model number for more details at smoothtalker.com

To comply with FCC rules, this booster must only be operated with cables, antennas

and coupling devices that have been approved for use with this equipment.

NOTE: It is normal for the booster to be quite warm while the phone is in use state.

outside antenna

Inside

antenna

Cellular Booster

Optional Power Types

12 volt install

fused type

12 volt socket

CLA plug type

120 volt AC/DC

2

Installation

Installation

1) Connect the outside antenna to the side of the booster
marked as “outside antenna”
Connect the inside antenna to the side of the booster
marked as “inside antenna”

2) Placement
Place the outside antenna in the middle of the vehicle roof. If the vehicle has a
sunroof please place the antenna on the roof towards the back window.
Place the Patch (inside) antenna in desired location. For cars and trucks
the console between the front seats is recommended.
Connect the booster as shown in Fig.1 below.

Important: Use only the power supply included with the booster. Connecting any
other power supply at any time will result in damage to the booster and will void
the warranty. Do not turn on the power switch until ALL cables have been
screwed or plugged into the booster or you can cause damage to the booster.

Applications

Fig. 1

Mobile Wireless with 12 volt

socket CLA plug-in type