SMK SCI01 User Manual

Confidential

User Manual

Bluetooth® module with a built-in 2.4GHz band antenna

Model Name: Bluetooth Low Energy Module

Model number: BTS05

GENERAL

BTS05 is a Bluetooth communication module complying with Bluetooth Version 5.0. It
operates in the two modes, Command Mode and Automatic Mode, and makes automatic
connection in Automatic Mode. It supports master and slave operations. It becomes an
adapter which transfers various data wirelessly between master and slave devices.
Therefore, wireless data communication can be realized by only replacing the cable
between apparatuses with BTS05, without changing a host system.

Features

1) Surface mounting module with a built-in antenna.

2) Unique automatic connection method and command connection mode can be
selected as control methods.

3) Support various profiles and protocols at user's requests.

Integration to the end product

The SMK Transceiver Module, model BTS05 has to be installed and used in accordance
with the technical description/installation instructions provided by the manufacturer.

The system may only be implemented in the configuration that was authorized. Note that
any changes or modifications to this equipment not expressly approved by the
manufacturer could void the user’s authority to operate this equipment.

Specification

1). Bluetooth® Specifications Ver.5.0-compliant

2). Frequency Range: 2402-2480 MHz

3). Modulation System: GFSK

4). Antenna: PWB (Monopole) type

5-5 Togoshi 6 Chome, Shinagawa-Ku, Tokyo 142-8511 Japan

User Manual

Regulatory Information
USA-Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy. If not installed and
used in accordance with the instructions, it may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.

If this equipment does cause harmful interference to radio or television reception, which
can be determined by tuning the equipment off and on, the user is encouraged to try and
correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the distance between the equipment and the receiver.

-Connect the equipment to outlet on a circuit different from that to which the receiver is
connected.

-Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

Labelling

SMK Transceiver module BTS05 not labelled.

FCC ID: GT3SCI01

5-5 Togoshi 6 Chome, Shinagawa-Ku, Tokyo 142-8511 Japan