SMK FC008 User Manual

User Manual
ZigBee®RF4CE compatible RF module with a built-in 2.4GHz band antenna
859 FC
Brand: SMK
Product Name: Transceiver Module
Model number: RXX9000-15XX
GENERAL
This “ZigBee RF4CE compatible RF module with a built-in 2.4GHz band antenna” which uses the platform of recently established ZigBee RF4CE responds to such requirements. The communication system is based on 2.4GHz band IEEE 802.15.4 PHY/MAC system and is capable of N-to-N high reliability two-way communication, low power consumption, coexisting with other 2.4GHz band RF and security settings.
This product, featuring a two-way communication by the use of radio frequencies and network function, contributes to the realization of a more convenient and stylish remote controls.
With regards to the technical development of RF remote controls, this “ZigBee RF4CE compatible RF module” is an addition to the previously developed FX8000, with more product lineup coming up for the expansion of the remote control business.
Features
1) By using the omni-directionality feature of RF, PAN with remote control as its core can be easily structured (N-to-N application is possible).
2). Compatible with ZigBee RF4CE Specification Version 1.00.
3). The standby-mode and intermittent reception feature conserves electricity consumption.
4). DSSS employed for modulation system provides high-resistance to noise and interference.
5). The employment of radio communication system using 2.4 GHz ISM band provides equipment with worldwide applicability and helps standardize equipment.
6). Acquisition of qualification for the Japanese Radio Law, FCC and CE is planned. Upon successful acquisition, RF applications do not require individual acquisition of qualification for such standards, which creates shorter lead time for equipment development and lower costs.
5-5 Togoshi 6 Chome, Shinagawa-Ku, Tokyo 142-8511 Japan
User Manual
859 FC
7). Compatible with decoded output of various IR communication formats, no change in equipment of application software is necessary, other than substituting previous IR receivers with this module. Equipment designing will thus be simpler.
Integration to the end product
The SMK Transceiver Module, model RXX9000-15XX has to be installed and used in accordance with the technical description/installation instructions provided by the manufacturer.
For detail information concerning type approval of this module (e.g. where this module is already pre-approved) please contact the authorized local distributor or the manufacturer.
The system may only be implemented in the configuration that was authorized. Note that any changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment.
Specification
1). RF Standard: ZigBee RF4CE Specification Version 1.00 compatible
2). Supply Voltage: 2.1-3.4 VDC
3). Operation Temperature Range: -20ºC to +70ºC
4). Interface: UART (Note 5) 115.2 kbps and IR decoder data output
5). External Dimensions: 17mm× 42mm × 5mm (not including connector)
6). Frequency Range: 2400-2483.5 MHz
7). Modulation System: DSSS
8). Modulation Type: Offset-QPSK
9). Antenna: PCB Inverted F type
10). Transmission Distance: 20m min. (reference only)
5-5 Togoshi 6 Chome, Shinagawa-Ku, Tokyo 142-8511 Japan
+ 3 hidden pages