NOTE: Please read instructions entirely and thoroughly before assembling and installing
this product
This bumper
is rated with a
Class IV
receiver.
(9,000lbs
Note: Check with OEM towing specifications and operation
Note: Check with OEM towing specifications and operation
before towing anything with your vehicle.
before towing anything with your vehicle.
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Step 9: Install the tire carrier (90-5612) cover plate to the top of the bumper using the supplied
3/8” x 1 “ bolts and hardware. (Fig E)
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Product cleaning and maintenance instructions
Dual state powder coat finish – Mild soap, window or glass cleaner may be used to clean the finish. In order
to protect the finish, you may wax your product on a regular basis with pure carnauba automotive wax. Do
not use any types of soap, polish or was that contains abrasive that could damage the finish. Textured coated
finishes should be cleaned with a mild soap on a damp sponge. Do not apply polish or was that requires to be
removed by means of buffing. This type of wax is commonly used at car wash facilities.
Limited Warranties
Smittybilt’s products are covered under the following limited warranties only. Note that the duration of the
limited warranty differs according to the material and finish of the product purchased. Subject to the duration
and conditions of the limited warranty stated below, Smittybilt warrants to the original retail purchaser that its
products are free from defects in material and workmanship. All other warranties and representations express
or implied, are hereby disclaimed, including fitness for merchantability and buyer’s intended use or purpose.
All parts are sold “AS IS” except for the limited warranties granted herein. Buyer assumes all risks as to the
selection, suitability and performance of all goods and products selected. This limited warranty does not
cover damage or impairment in any part due to misuse, improper installation, accident or contact with on-road
or off-road hazards, product modification, improper or inadequate cleaning and/or maintenance. Smittybilt is
not responsible for items damaged during shipping. This warranty is not transferable from the original buyer.
For the original Buyer to be eligible for the limited warranty coverage, the Buyer must provide proof of
purchase. Smittybilt strongly recommends returning the warranty registration card.
Customer’s remedy hereunder shall be limited only to repair or replacement (at Smittybilt’s option) of any
defective part(s) returned to Smittybilt at customer’s expense. The determination of whether or not a returned
part is defective or subject to coverage under the limited warranties stated herein shall be made at Smittybilt’s
sole discretion.
Duration of Limited Warranty
1. Limited Five (5) Year / 50,000 Mile Pro-Rata Warranty (whichever occurs first) on Dual-Stage
Powder Coating Products -
Smittybilt dual-stage powder coated products carry the foregoing limited repair or replacement warranty
for a period of (5) years or 50,000 miles (whichever occurs first) from date of purchase against
workmanship and defects in the material, provided that any claim submitted after (2.5) years from date of
purchase shall, if accepted, be satisfied by Smittybilt offering customer a credit on the purchase of a
replacement product equal to fifty percent (50%) of customer’s initial purchase price.
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Loading...