Smittybilt JB48CFT User Manual

Installation Instructions

Remove existing after

Existing after

Frame Cover (Part # JB48CFT)

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ
INSTRUCTIONS CAREFULLY.

2. Remove upper existing bolts from after market front bumper (Figure 1). Save bolts for later

use.

3. Position Fill Plate over cavity and line up hole on the side tabs of the Fill Plate with holes on
after market bracket.

4. Align and attach Fill Plate to after market bumper with existing hardware remove in Step 2
(Figure 2).

5. Do periodic inspections to the installation to make sure that all hardware is secure and tight.

07-10 Jeep Wrangler

market bolt from each side

Figure 1 Figure 2

Fill Plate installed

market bolts

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 400 West Artesia Blvd, Compton, CA 90220