Smittybilt 987xx User Manual

Installation Instructions

Replacement Top (Part # 987xx)

86-94 Suzuki Sidekick/Geo Tracker

WWW.SMITTYBILT.COM

Step 1: Remove OEM top (if equipped). Remove the top skin only, not the bow assembly. Fold the front
header back. (Fig A) Remove the fiberglass rod in the rear window for later use.

Step 2: Attach the rear window to top. Drape the new top over the vehicle and bow assembly. (Fig B)

Note: Please read instructions entirely before installing this product.

(Fig A) (Fig B)

Step 3: Slide the front of the top over front header. (Fig C) Hook the five clips into the slots on the bottom
of the header. Its easier to clip the middle three first and then the ones on each side. (Fig D)

(Fig C) (Fig D)

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 400 West Artesia Blvd, Compton, CA 90220

Installation Instructions

Replacement Top (Part # 987xx)

86-94 Suzuki Sidekick/Geo Tracker

WWW.SMITTYBILT.COM

Step 4: Snap the rear five snaps on the top to the snaps on the rear bow. (Fig E)

Step 5: Attach and hook the rear plastic corner on the top onto the corners of the vehicle. (Fig F)

The stop on the inside edge of the
plastic piece on the top hooks around
the corner retainer on the vehicle.

(Fig E) (Fig F)

Step 6: Pull the side window retainer bar outward away from vehicle. Separate the Velcro around the
window on the top. Insert the front part of the retainer bar into the window and secure with
the Velcro. Then proceed to fit the corner of the retainer into the corner of the window and then
slide the bottom portion of the retainer bar into the window and secure with the Velcro (Fig G)
Note: Use caution when pulling the retainer bar outward in order not to break the factory clip
its secured into. There is also a web strap on the inside that needs to be disconnected.

(Fig G) (Fig H)

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 400 West Artesia Blvd, Compton, CA 90220