Installation Instructions
)
Extended Top (Part #,936xx)
Installation requires an aftermarket Windshield Channel (Smittybilt Part # 90104
INSTALLATION INSTRUCTIONS:
Before you begin, the temperature of the Brief should be above 70 degrees Fahrenheit. We suggest
laying the Brief in the sunlight for 1 hour before installation.
1. Locate the rubber blade on front edge (Figure 1).
2. Place the Brief on top of Jeep. Insert rubber blade into Windshield Channel, working from one side
of vehicle to the other (Figures 2 & 3).
Figure 2
Figure 3
1997-2006 Jeep Wranglers
Included Components:
1-Brief
2-J-Clips
Figure 1
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 1600 Walnut Parkway, Compton, CA 90220
Installation Instructions
Extended Top (Part #,936xx)
3. Locate 2 Velcro straps in each front corner of the Brief (Figure 4)
• Wrap Strap A over the top of the bar towards the inside of the vehicle (Figure 5). The Velcro of
Strap A should be facing outward from the roll bar.
• Strap B wraps around the outside of the roll bar.
• Attach Strap B to Strap A on the underside of the roll bar (Figure 6).
• Do both driver and passenger sides of the vehicle.
Figure 4
Wrap Strap A over top of roll bar
Figure 5
1997-2006 Jeep Wranglers
Figure 6
Inside of Brief
Strap A Strap B Strap B
4. Locate the Velcro flaps on each side of the roll bar.
Open and wrap flaps around roll bar, pull tight and press
together to close (Figure 7). Do both driver and
passenger sides of the vehicle.
Strap A
Figure 7
Strap B
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 1600 Walnut Parkway, Compton, CA 90220
Installation Instructions
Extended Top (Part #,936xx)
5. Locate the center strap along the central roll bar. Run
the center strap around the rear and under the central
roll bar forward to the Footman Loop near the top center
of the windshield. Run strap through Footman Loop and
feed strap through its buckle securely (Figure 8).
NOTE: The rear straps can be fastened in two different methods:
Option 1 shows how to attach the Brief to your vehicle using J-Clips.
Option 2 shows how to attach the Brief to your vehicle around the rear shoulder
seat belts.
Option 1 (with J-Clip)
6. Feed the rear corner straps through the J-Clips (Figure 9) and place the J-Clip under a convenient
attachment point, such as a rear corner rail or floor loop (Figure 10).
Figure 9
Figure 10
1997-2006 Jeep Wranglers
Figure 8
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 1600 Walnut Parkway, Compton, CA 90220
Installation Instructions
Extended Top (Part #,936xx)
7. Wrap the straps around the roll bar or seat belt
shoulder harness. Feed the loose end through the
buckle and pull tight (Figure 11). Be sure not to
interfere with the seat belts safety and operation.
Place the strap under the seat belt. Never install over
the seat belt strap.
8. Locate the two side straps near the central roll bar. For
each side, wrap the straps around the vertical roll bar,
then feed the loose end through the buckle on the
other end and pull tight (Figure 12). Tighten all straps
(including center strap). Tie off loose strap ends.
9. Re-adjust Velcro and tighten all straps to assure a
wrinkle-free fit.
1997-2006 Jeep Wranglers
Figure 11
Figure 12
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 1600 Walnut Parkway, Compton, CA 90220
Installation Instructions
Extended Top (Part #,936xx)
Option 2 (without J-Clip)
10. Wrap the straps around the seat belt shoulder
harness and roll bar. Feed the loose end through the
buckle on the other end and pull tight (Figure 13).
Be sure not to interfere with the seat belts safety and
operation. Place the strap under the seat belt.
Never install over the seat belt strap.
11. Locate two straps in the middle of each side of the
Brief. For each side, wrap the straps around the
vertical roll bar, then feed the loose end through the
buckle on the other end and pull tight (Figure 14).
Tighten all straps (including the center strap). Tie off
loose strap ends.
12. Re-adjust Velcro and tighten all straps to assure a
wrinkle-free fit.
13. Installation is now complete
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 1600 Walnut Parkway, Compton, CA 90220
1997-2006 Jeep Wranglers
Figure 13
Figure 14
Installation Instructions
Extended Top (Part #,936xx)
LIMITED WARRANTY
Smittybilt (The Company) warrants to the original purchaser of this product that should the product or any part thereof,
under normal use and conditions, be proven defective in material or workmanship within the warranty period of 1 year from
the date of purchase, such defect(s) will be repaired or replaced (At the Company’s option) without charge for parts or labor.
To obtain repair or replacement within the terms of the warranty, the product is to be delivered with proof of warranty
coverage ( e.g. dated bill of sale, receipt), specification of defect, freight pre-paid with Returns Good Authorization Number
from Smittybilt to place of purchase. Items returned to Smittybilt Automotive without an Returns Authorization Number will
be refused and returned to sender at the senders expense.
This warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been
damaged through altercation, improper installation, mishandling, misuse, neglect accident or acts of nature. THE EXTENT
OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR
REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED
THE PURCHASE PRICE PAID BY THE PURCHASER FOR THIS PRODUCT.
This warranty is in lieu of all expressed warranties and liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN
WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUN DER INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY MUST BE BROUGHTH WITHIN A PERI OD OF 90 DA YS FROM D A TE OF
ORIGINAL PURCHASE.IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARR AN TY , EXPRESSED OR
IMPLIED,WHATSOEVER. No person or representative is authorized to assume for the company any liability other than
expressed herein in connection with the sale of this product. Some states do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental or consequential damage, therefore above limitations may not apply
to you. This warranty gives the purchaser specific legal rights. The purchaser may have additional rights, which vary from
state to state.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or
consequential damage, therefore above limitations may not apply to you. This warranty gives the purchaser specific legal
rights. The purchaser may have additional rights, which vary from state to state.
Care and Maintenance Information
To keep your product looking new and for the maximum possible wear, it requires periodic cleaning and
maintenance.
FABRIC – The fabric should be washed using soap, warm water and a soft bristle brush. Rinse with clear water
making sure to remove all soap.
WINDOWS – DO NOT use a brush on the windows. Wash the windows with a well water soaked sponge or soft
cloth and a mild dishwashing detergent. Never wipe the windows when they are dry.
ZIPPERS – To keep the zippers operating smoothly keep them clean and lubricated by using a silicone type of
lubricant.
SNAPS – Keeping the snaps cleaned and lubricated with silicone will help prevent the snaps from sticking.
Made in China
1997-2006 Jeep Wranglers
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 1600 Walnut Parkway, Compton, CA 90220
Loading...