Smittybilt 908xx User Manual

Installation Instructions

an aftermarket Windshield Channel (Smittybilt Pa

rt # 90101)

Standard Top (Part #, 908xx)

If your Wrangler does not have a soft top Windshield Channel, your installation requires the purchase of

INSTALLATION INSTRUCTIONS:

Before you begin, the temperature of the Brief should be above 70 degrees Fahrenheit. We suggest laying the
Brief in the sunlight for 1 hour before installation.

1. Locate the front edge and fold over (Figure 1).

2. Place the Brief on top of Jeep. Insert folded edge into Windshield Channel, working from one side of
vehicle to the other (Figures 2 & 3).

Figure 2

For Technical Support/Warranty Information please call 888-717-5797

Smittybilt, 400 W Artesia Blvd, Compton, CA 90220

1987-1991 Jeep Wranglers

Included Components:

1- Brief

Figure 1

Figure 3

Installation Instructions

3. Lay the back of the Brief over the central roll bar and pull
the rear corner straps. Loop the straps around the rear
side roll bar and attach to mating buckle (Figure 4).

4. Locate the Velcro straps on each side of the roll bar. Wrap
the straps around roll bar and fasten. Do both the driver
and passenger sides of the vehicle (Figure 5).

5. Locate the center strap along the central roll bar. Run the
center strap around the rear and under the central roll bar
forward to the Footman Loop near the top center of the
windshield. Run strap through Footman Loop and feed
strap through its buckle securely (Figure 6).

For Technical Support/Warranty Information please call 888-717-5797

Smittybilt, 400 W Artesia Blvd, Compton, CA 90220

Standard Top (Part #, 908xx)

1987-1991 Jeep Wranglers

Figure 4

Figure 5

Figure 6