Smittybilt 886257 User Manual

Installation Instructions

TOOLS REQUIRED

Figure 4

Figure 2

– Grille shell with g

rid

Figure 3

– Front View of positioning all six Billet Grille

Figure 5

– Grille shell with uprights

Figure

6 –

Front View of positioning all six Billet Grille

Figure 7

Billet Grille (Overlay)

08-on Ford Super Duty 6PC

PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE STARTING THE INSTALLATION. THE
MANUFACTURER IS IN NO WAY RESPONSIBLE FOR ANY PERSONAL INJURY OR VEHICLE DAMAGE THAT MAY
OCCUR DURING THE INSTALLATION.

INSTALLATION INSTRUCTIONS FOR GRILLE SHELL IN FIGURE 2

INSTALLATION INSTRUCTIONS FOR GRILLE SHELL IN FIGURE 5

INCLUDED COMPONENTS

1 – Billet Grille(6 pieces)
20 – Metal Brackets
20 – M4 x50mm Phillips Screws
6 – M4 x35mm Phillips Screws
26 – M4 Flange Nuts

1.

Inspect product and check components with items listed above.

2.

Pop Hood. Position all Billet Grille onto grille shell cavity (Figure 3).

3.

Loosely attach the Billet Grille by holding the Metal Brackets behind factory grille shell and inserting the Phillips Screws (from
the front) through the Billet Grille holes and Metal Brackets, secure them with Flange Nuts provided (Figure 4).

– Rear view of vehicle’s shell; Billet Grills

attached with Metal Brackets and Flange Nuts

4.

Repeat Steps 3 for each section of Billet Grille.

5.

Once the Billet Grilles are loosely attached, center them and tighten all Phillips Screws at the same rate.

1.

Inspect product and check components with items listed above.

2.

Pop Hood. Position all Billet Grille onto grille shell cavity (Figure 6).

3.

Loosely attach the Billet Grille by holding the Metal Brackets behind factory grille shell and inserting the Phillips Screws (from
the front) through the Billet Grille holes and Metal Brackets, secure them with Flange Nuts provided (Figure 6).

4.

Once the Billet Grilles are loosely attached, center them and tighten all Phillips Screws at the same rate.

-- Phillips Screw Driver

-- 4mm wrench

Figure 1 – Included Hardware

– Rear view of vehicle’s shell; Billet Grills

attached with Metal Brackets and Flange Nuts

Smittybilt Automotive Products., 886257
400 W. Artesia Blvd Compton CA. 90220 11/11/09
Customer Service / Technical Support: [phone]