Smittybilt 886151 User Manual
Installation Instructions
y
Easy Install Billet Grille (Part # 886151)
2004-2007 Ford F150 Honeycomb
Overla
/Cut-Cut
NOTE: Carefully read entire instructions thoroughly before attempting
to assemble and/or install this product.
INCLUDED COMPONENTS
1 – Billet Grille 6 - #10 x 5/8” Sheet Metal Screws
6 – “L” Brackets 6 - #10 Flat Washers
6 – M4 x 15mm Phillips Screws 6 – 60mm Metal Plates
6 – M4 Lock Nuts 6 – M4 x 40mm Phillips Screws
6 – Tinnerman Clips
OVERLAY INSTALLATION INSTRUCTIONS
1. Inspect product and check components with items listed above.
2. Open hood and remove grille shell as per manufacturer instructions.
3. Cover the top, sides, and lower horizontal bars with masking tape to
protect the finish. Place the grille shell on a clean working area.
4. Remove logo from grille shell and position Billet Grille onto grille shell
cavity.
5. Loosely attach Billet Grille by holding 60mm Metal Plate behind factory
grille shell and inserting M4 x 40mm Phillips Screw (from the front)
through the Billet Grille hole and Metal Plate, secure it with Lock Nut
provided (Figure 1).
6. Once the Billet Grille is loosely attach, center it and tighten all Bolts at
the same rate.
CUT OUT INSTALLATION INSTRUCTIONS
7. Follow Steps 1-3 to start the cut out installation.
8. Using a hacksaw or a rotary disc carefully cut out the honeycomb as close as possible without damagin g the
horizontal bars or the vertical sides (Figure 2). NOTE: Always wear eye protection & gloves when using power
tools.
9. Carefully grind any protruding edges remaining from the honeycomb.
10. Attach “L” Brackets to Billet Grille using the M4 x 15mm Phillips Screws. Carefully position Billet Grille onto the
cavity of the grille shell.
11. Mark the drilling location through the hole on the “L” Bracket onto the grille shell (Figure 3).
12. Remove Billet Grille and set aside. Drill a 5/32” hole on each marked location.
13. Reposition Billet Grille onto grille shell and loosely attach “L” Brackets (Figure 4).
14. Once the Billet Grille is loosely attach, center Billet Grille and tighten all Bolts at the same rate.
15. Make sure the Billet Grille is properly aligned and securely fastened, then reinstall the grille shell with original
fasteners.
Figure 2 Figure 3 Figure 4
Mark drilling
location
TOOLS REQUIRED
- Phillips Screw Driver
- 4mm Wrench
- Hacksaw
- Grinder
M4 x 40mm Screw,
Metal Plate, and
Lock Nut
Figure 1
M4 x 15mm Screws
and M4 Lock Nut
#10 Sheet Metal Screw
w/ Tinnerman Clip
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 1600 Walnut Parkway, Rancho Dominguez, CA 90220
Installation Instructions
y
Easy Install Billet Grille (Part # 886151)
2004-2007 Ford F150 Honeycomb
Overla
/Cut-Cut
We recommend normal cleaning by using mild soap and water also applying a non-abrasive aluminum polish on a regular schedule. (Taking into
consideration your climate and driving time and conditions.)
LIMITED WARRANTY
Smittybilt (The Company) warrants to the original purchaser of this product that should the product or any part thereof, under normal use and
conditions, be proven defective in material or workmanship within the warranty period 1 year from the date of purchase, such defect(s) will be
repaired or replaced (At the Company’s option) without charge for parts or labor.
To obtain repair or replacement within the terms of the warranty, the product is to be delivered with proof of warranty coverage ( e.g. dated bill
of sale, receipt), specification of defect, freight pre-paid with Returns Good Authorization Number from Smittybilt to place of purchase. Items
returned to Smittybilt Automotive without an Returns Authorization Number will be refused and returned to sender at the senders expense.
This warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through
altercation, improper installation, mishandling, misuse, neglect accident or acts of nature. THE EXTENT OF THE COMPANY’S LIABILITY
UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT,
SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY THE PURCHASER FOR THIS PRODUCT.
This warranty is in lieu of all expressed warranties and liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION
FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE
BROUGHTH WITHIN A PERIOD OF 90 DAYS FROM DATE OF ORIGINAL PURCHASE.IN NO CASE SHALL THE COMPANY BE
LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY,
EXPRESSED OR IMPLIED,WHATSOEVER. No person or representative is authorized to assume for the company any liability other than
expressed herein in connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage,
therefore above limitations may not apply to you. This warranty gives the purchaser specific legal rights. The purchaser may have additional rights,
which vary from state to state.
CARE AND MAINTANCE INFORMATION
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 1600 Walnut Parkway, Rancho Dominguez, CA 90220
Loading...