Smittybilt 878022 User Manual

Installation Instructions

Easy Install Billet Grille (Part #878022)

03-05 Dodge Ram 2500/3500

NOTE: Carefully read entire instructions thoroughly before

attempting to install this part.

NOTE: During shipping product might loose its convex shape or the bars may bend slightly. In order to get a proper fit, product might
need to be re-shaped slightly by bending it BY HAND to regain its convex shape. Be careful not to damage the Billet Grille when
bending.

02-05 Dodge Ram 1500,

DRILLING REQUIRED

INCLUDED COMPONENTS

1 – Billet Grille
5 - #8 x 1 ½” Sheet Metal Screws
5 – Tinnerman Clips

INSTALLATION INSTRUCTIONS

1. Inspect product and check components with items listed above.

2. Carefully position Billet Grille onto bumper cavity and mark through holes the drilling locations (Figure 1).

NOTE: Make sure Billet Grille is properly aligned before marking the drilling locations.

3. Use a Drill to drill at marked locations.

4. Attach Billet Grille by holding the Tinnerman Clip behind bumper and inserting Sheet Metal Screw (from the

front) through the Billet Grille hole and Tinnerman Clip (Figure 2).

5. Align Billet Grille and tighten all Screws at the same rate.

TOOLS REQUIRED

- Phillips Screw Driver

- 4mm Wrench

- Drill w/ 5/32” Drill Bit

Figure 1

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 1600 Walnut Parkway, Rancho Dominguez, CA 90220

Installation Instructions

Easy Install Billet Grille (Part #878022)

03-05 Dodge Ram 2500/3500

02-05 Dodge Ram 1500,

CARE AND MAINTANCE INFORMATION

We recommend normal cleaning by using mild soap and water also applying a non-abrasive aluminum polish on a regular schedule.
(Taking into consideration your climate and driving time and conditions.)

Smittybilt (The Company) warrants to the original purchaser of this product that should the product or any part thereof, under
normal use and conditions, be proven defective in material or workmanship within the warranty period of 1 year from the date of
purchase, such defect(s) will be repaired or replaced (At the Company’s option) without charge for parts or labor. To obtain repair
or replacement within the terms of the warranty, the product is to be delivered with proof of warranty coverage ( e.g. dated bill of
sale, receipt), specification of defect, freight pre-paid with Returns Good Authorization Number from Smittybilt to place of
purchase. Items returned to Smittybilt Automotive without an Returns Authorization Number will be refused and returned to sender
at the senders expense.

This warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged
through altercation, improper installation, mishandling, misuse, neglect accident or acts of nature. THE EXTENT OF THE

COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT
PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE
PAID BY THE PURCHASER FOR THIS PRODUCT.

This warranty is in lieu of all expressed warranties and liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY

IMPLIED WARRANTY OF MERCHANTABILITY SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN
WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY MUST BE BROUGHTH WITHIN A PERIOD OF 90 DA YS FROM D A TE OF
ORIGINAL PURCHASE.IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARR AN TY, EXPR ESSE D OR

Tinnerman

Clip

Figure 2

LIMITED WARRANTY

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 1600 Walnut Parkway, Rancho Dominguez, CA 90220