Smittybilt 76801-XRC User Manual

Top Driver Side Shown
mounting holes.
Installation Instructions
XRC Front Bumper
(Part#76801 1987-1995 Wranglers)
Parts Included Qty Parts Included Qty
Front Bumper 1 ½ x 1 1/4 “ Bolt 6 ½” Flat Washer 6
Step 1: Remove the factory front bumper from vehicle by removing the two top and the two bottom bolts. (Figure A) Save these bolts for use later.
On YJs (87-95) it may be necessary to grind down the welds slightly on top of the frame in order to get the bumper to slide back over the frame and align
NOTE: Carefully read entire instructions thoroughly before attempting
to assemble and/or install this product.
8 mm Hex Bolt (Fairlead) 2 8 mm (I.D.) Flat Washer 2 8mm Locking Nut 2
Factory Bolt Locations (both sides)
(Figure A)
Note: On YJs (87-95) it may be necessary to grind down the welds slightly on top of the frame in order to get the bumper to slide back over the frame and align mounting holes.
Step 2: Position the new bumper on the front of the vehicle. Line up the holes on the frame with the slotted holes on the bumper brackets. Attach the bumper to the frame using the supplied bolts. (Fig B,C)
The bumper attaches to the top of the frame using both mounting locations.
(Figure B)
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
XRC Front Bumper
(Part#76801 1987-1995 Wranglers)
Bottom Driver side shown.
(Fig C)
STEP 3: Make sure all bolts are securely tightened. Installation is now complete.
NOTE: There are two 8mm Hex Bolts, washers and nuts included to mount fairlead to the bumper.
To protect your investment it is recommended to regularly wash and wax this part. Do not use any type of cleaners that contain abrasives that may damage the finish of your part.
Smittybilt (The Company) warrants to the original purchaser of this product that should the product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 3 years from the original date of purchase, such defect(s) will be repaired or replaced (At the Company’s option) without charge for parts or labor.
To obtain repair or replacement within the terms of the warranty, the product is to be delivered with proof of warranty coverage ( e.g. dated bill of sale, receipt), specification of defect, freight pre-paid with Returns Good Authorization Number from Smittybilt to place of purchase. Items returned to Smittybilt without a Returns Authorization Number will be refused and returned to sender at the sender’s expense.
This warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through altercation, improper installation, mishandling, misuse, neglect accident or acts of nature. THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS
LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY THE PURCHASER FOR THIS PRODUCT.
This warranty is in lieu of all expressed warranties and liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHTH WITHIN A PERIOD OF 90 DAYS FROM DATE OF ORIGINAL PURCHASE.IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED,WHATSOEVER. No person or representative is authorized to assume for the company any liability other than expressed herein in connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage, therefore above limitations may not apply to you. This warranty gives the purchaser specific legal rights. The purchaser may have additional rights, which vary from state to state.
CARE AND MAINTENANCE
LIMITED WARRANTY
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Loading...