Smittybilt 76641 User Manual

Part # 76631,76641

Installation Instructions

Rock Crawler Side Armor/ Rocker Guards

1987-2006 Jeep Wranglers

NOTE: Carefully read entire instructions thoroughly before attempting
to assemble and/or install this product. Smittybilt is in no way
responsible for any damage to the vehicle or personal injury that may
occur during the installation or use of this product. CAUTION: This
product is designed primarily to enhance the appearance of the vehicle.
Do NOT rely on it in any way to protect against injury or death in the
event of an accident. “ALWAYS WEAR YOUR SEAT BELT “

Parts Included Qty Tools Needed

Driver Side Guard 1
Passenger Side Guard 1
3/8” x 1” Self Tapping Bolts 16

Step 1: Position the guard up to the frame. Maintain a ½” minimum gap between the bottom of the vehicle
and the top of the guard. Adjust the guard from front to back until it is parallel to the side of the
frame while also making sure it is parallel with the side of the vehicle. (Assistance is recommended
while installing these guards)

Step 2: When you are satisfied with the placement of the guard, mark the side of the frame through the
mounting holes located on the guards brackets. After you have marked all the holes place the
guard to the side. Center punch the frame at the marked locations and drill a 5/16” hole in the
frame. Caution: Before drilling be sure to check the backside for hazards or obstructions.

Step 3: Position the guard back against the frame and line up the holes in the brackets with the holes that you
just drilled on the frame. Secure the guard to the frame using the supplied self tapping bolts. Tighten
all bolts at this time. (Figure 1, 2)

Step 4: Repeat these steps to install the other side. Installation is now complete.

Ratchet and Socket Set

Drill Bit Set

Drill

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 1600 Walnut Parkway, Rancho Dominguez, CA 90220

Part # 76631,76641

Installation Instructions

Rock Crawler Side Armor/ Rocker Guards

1987-2006 Jeep Wranglers

SIDE ROCKER GUARD SHOWN SIDE ARMOR GUARD SHOWN

NOTE: To protect your investment, wax this product after installing. Regular waxing is recommended. Do not use any type of polish/wax that
contains abrasives that could damage the finish.

Smittybilt (The Company) warrants to the original purchaser of this product that should the product or any part thereof, under normal use and
conditions, be proven defective in material or workmanship within the warranty period of 3 years from the date of purchase, such defect(s) will be
repaired or replaced (At the Company’s option) without charge for parts or labor. To obtain repair or replacement within the terms of the warranty,
the product is to be delivered with proof of warranty coverage ( e.g. dated bill of sale, receipt), specification of defect, freight pre-paid with
Returns Good Authorization Number from Smittybilt to place of purchase or to Smittybilt. Items returned to Smittybilt Automotive without an
Returns Authorization Number will be refused and returned to sender at the senders expense.

This warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through
altercation, improper installation, mishandling, misuse, neglect accident or acts of nature. THE EXTENT OF THE COMPANY’S LIABILITY

UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT,
SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY THE PURCHASER FOR THIS PRODUCT.

This warranty is in lieu of all expressed warranties and liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED

WARRANTY OF MERCHANTABILITY SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION
FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE
BROUGHTH WITHIN A PERIOD OF 90 DAYS FROM DATE OF ORIGINAL PURCHASE.IN NO CASE SHALL THE COMPANY BE
LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY,

EXPRESSED OR IMPLIED,WHATSOEVER. No person or representative is authorized to assume for the company

expressed herein in connection with the sale of this product. Some states do not allow limitations on how long an
implied warranty lasts or the exclusion or limitation of incidental or consequential damage, therefore above limitations
may not apply to you. This warranty gives the purchaser specific legal rights. The purchaser may have additional rights,
which vary from state to state.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental
or consequential damage, therefore above limitations may not apply to you. This warranty gives the purchaser specific
legal rights. The purchaser may have additional rights, which vary from state to state.

Drilling and
Mounting Locations.

(Figure 1)

LIMITED WARRANTY

Drilling and

Mounting Locations.

(Figure 2)

any liability other than

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 1600 Walnut Parkway, Rancho Dominguez, CA 90220