Smittybilt 56613xx User Manual

Cord Clip

Installation Instructions

G.E.A.R. (Truck) Seat Cover

Part # 56613xx (Universal Fit)

Carefully read the following installation instructions and tips for ease of installation.

Parts Included Qty Parts Included Qty

Seat Covers 2

Note:

gives you plenty of flexibility in placing them on the covers.

Each cover has two sewn-on large storage pouches. There is also six multi-purpose pouches total that

STEP 1:

STEP 2:

to pull the seat cover down. When you have determined the correct position simply
pull the draw strings snug and slide up the plastic cord clip. Installation is now
complete. (Fig A) See step 4 for pouch installation.

STEP 3:

way down and remove it. Remove the cord from the webbing loops in the area of the
factory part.(Fig B)When you have determined that you have enough room for the factory
part slide the cord straight down through the webbing loops until you have cleared the
factory part. (Fig C) Once below the part you can start the criss-cross design again until
you have reached the bottom of the cover. Re-install your headrest if equipped, (Fig D)
Re-install the cord clip, adjust cover to the optimal position and then pull the cord snug
and slide the cord clip up. Make sure all seat functions work properly. Installation is
now complete. (Fig E,) See step 4 for pouch installation.

www.smittybilt.com

Remove headrest from seat if applicable. Release the cord clip and slide it down.( Fig A)

This will create slack; next proceed to slide the cover down over your seat.

If your seat does not have any factory parts on it (arm rests, levers, air bags, ect) continue

If your seat is equipped with some kind of factory part slide the plastic cord clip all the

Separate Pouches 6

Slide the cord
straight down
through the
webbing loops on
both sides until
you have cleared
the factory part

(Fig A) (Fig B) (Fig C)

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 400 W. Artesia Blvd, Compton, CA 90220

Installation Instructions

G.E.A.R. (Truck) Seat Cover

Part # 56613xx (Universal Fit)

(Fig D) (Fig E) (Fig F)

www.smittybilt.com

STEP 4:

You may now install your pouches.
What makes this cover even more
versatile is that you may install the
pouches wherever you like. After
determining the proper place slide the
pouch straps through the webbing on
the seat cover (Fig F), secure the pouch
by fastening the snaps together.
Installation is now complete.

Actual pouches may vary from picture

Smittybilt (The Company) warrants to the original purchaser of this product that should the product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within the
warranty period of 1 year from the date of purchase, such defect(s) will be repaired or replaced (At the Company’s option) without charge for parts or labor. To obtain repair or replacement within the terms of the
warranty, the product is to be delivered with proof of warranty coverage ( e.g. dated bill of sale, receipt), specification of defect, freight pre-paid with Returns Good Authorization Number from Smittybilt to place of
purchase. Items returned to Smittybilt without an Returns Authorization Number will be refused and returned to sender at the senders expense.
This warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through altercation, improper installation, mishandling, misuse, neglect accident or acts
of nature. THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE

COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY THE PURCHASER FOR THIS PRODUCT.
This warranty is in lieu of all expressed warranties and liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY SHALL BE LIMITED TO THE

DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE
BROUGHTH WITHIN A PERIOD OF 90 DAYS FROM DATE OF ORIGINAL PURCHASE.IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES
FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED,WHATSOEVER. No person or representative is authorized to assume for the company any liability other than expressed herein in
connection with the sale of this product. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage, therefore above limitations may not
apply to you. This warranty gives the purchaser specific legal rights. The purchaser may have additional rights, which vary from state to state.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage, therefore above limitations may not apply to you. This warranty gives the
purchaser specific legal rights. The purchaser may have additional rights, which vary from state to state.

(Fig G)

LIMITED WARRANTY

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 400 W. Artesia Blvd, Compton, CA 90220