Smittybilt 495xx User Manual

Installation Instructions

Replacement Front Seat

(Part # 450xx, 455xx, 451xx, 495xx)

WWW.SMITTYBILT.COM

1976-2010 CJ & Wranglers

Note: All seats being installed in 1997 - 2006 Jeep ® TJ Wranglers will require a seat adaptor bracket

Included components:

(1) Seat
(1) Plastic Cover (LH)
(1) Plastic Cover (RH)
(1) Recliner knob

Knob Plastic Cover

Replacement Seat Assembly

1. Firmly press plastic cover to the side of the metal seat recliner bracket for each side.

2. Place recliner knob over recliner shaft and press firmly. Repeat for other side.

3. Recheck to make sure covers and knobs are securely seated and attached before installing seats.

Replacement Seat Installation

4. Remove old seat from riser by removing 4 bolts.

Save these bolts as they will be reused later.

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 400 West Artesia Blvd, Compton, CA 90220

Knob fully seated on the
recliner shaft.

Installation Instructions

Replacement Front Seat

(Part # 450xx, 455xx, 451xx, 495xx)

WWW.SMITTYBILT.COM

1976-2010 CJ & Wranglers

5. Remove sliders from old seats by removing 4 bolts.

Save these bolts as they will be reused later.

NOTE: To access the rear 2 bolts push slider arm
down and move slider forward.

6. Place sliders onto new seats. Reuse spacers from

The old seat to align the slider.

7. Fasten slider to the new seat using the 4 bolts

saved from step 5

8. Carefully place slider back onto seat riser and

fasten with 4 bolts saved from step 4.

NOTE: All 1997-2002 Wranglers require Adapter 49900 Driver Side or 49901 Passenger Side.

NOTE: All 2003-2006 Wranglers require Adapter 49902 Driver Side or 49903 Passenger Side.

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 400 West Artesia Blvd, Compton, CA 90220