Installation Instructions
Standard Bucket Front Seat
(Part # 449xx)
WWW.SMITTYBILT.COM
1976-2006 CJ & Wranglers
Note: All seats being installed in 1997 - 2006 Jeep ® TJ Wranglers will require a seat adaptor bracket
Included components: Required Tools:
(1) Seat Back rest Crescent Wrench
(1) Seat Cushion Socket Set
(4) Hex Bolt M10 x 20 Ratchet
(4) Washers
Replacement Seat Assembly
1. Unwrap the side cushion trim in order to
access the bolts as shown in Fig 1.
2. Position brackets of back rest through the
slots of the cushion trim as shown in Fig 2.
3. Securely tighten the 4 bolts through the holes
of the back rest bracket to cushion frame as
shown in Fig 3.
4. Carefully wrap the side cushion trim back
over the back rest bracket and hook the trim
to the plate underneath the cushion frame as
shown in Fig 4.
Replacement Seat Installation
5. Remove old seat from riser by removing 4 bolts.
Save these bolts as they will be reused later.
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
Standard Bucket Front Seat
(Part # 449xx)
WWW.SMITTYBILT.COM
1976-2006 CJ & Wranglers
6. Remove sliders from old seats by removing 4 bolts.
Save these bolts as they will be reused later.
NOTE: To access the rear 2 bolts push slider arm
down and move slider forward.
7. Place sliders onto new seats. Reuse spacers from
The old seat to align the slider.
8. Fasten slider to the new seat using the 4 bolts
saved from step 5
9. Carefully place slider back onto seat riser and
fasten with 4 bolts saved from step 4.
NOTE: All 1997-2002 Wranglers require Adapter 49900 Driver Side or 49901 Passenger Side.
NOTE: All 2003-2006 Wranglers require Adapter 49902 Driver Side or 49903 Passenger Side.
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Loading...