03082
Diamond Desk Installation Instructions
For Assistance in assembling product, missing or damaged parts, or to place an order, please contact
customer service at 800-328-1061.
You may also place your order online at
Form #179964 www.smithsystem.com 04/2013
Components and Hardware
Connector Bolt ¼-20 X 23mm
P/N: 70867
QTY: 2
Connector Nut ¼-20 x 17mm
P/N: 70869
QTY: 2
#10 x 5/8” Wood Screw
P/N: 70080
QTY: 14
Hex Key Allen Wrench 3/16”
P/N: 77813
QTY: 1
Diamond Top
QTY: 1
SS Leg and Center Leg Weldment
QTY: 1 each
Replacement Hardware Pack:
1. 69761 BLA/ZINC-R
a. (2) 70867 – Connector Bolt ¼-20x23mm
b. (2) 70869 – Connector Nut ¼-20x17mm
c. (14) 70080 - #10x5/8 Truss Head Phillips Head
d. (1) 77813 – Hex Key Allen Wrench 3/16”
For Assistance in assembling product, missing or damaged parts, or to place an order, please contact
Form #179964 www.smithsystem.com 04/2013
customer service at 800-328-1061.
You may also place your order online at
Assembly Instructions
Connector Bolt
Step 1: Align the center support with the pre-drills on the top.
Step 2: Position the other legs as shown below, aligning them with the pre-drills.
Step 3: Secure the legs together loosely with the connector bolts provided.
Step 4: Fasten the frame assembly to the top using the (14) 5/8” wood screws provided.
Step 5: Tighten the connector bolt using the Allen Key (Hex Key) provided.
For Assistance in assembling product, missing or damaged parts, or to place an order, please contact
customer service at 800-328-1061.
You may also place your order online at
Form #179964 www.smithsystem.com 04/2013
Loading...