Smith & Noble Metro Track Flat Wood Hardware, Metro Chic Hardware Installation Instructions Manual

Warranty Service

STEP BY STEP INSTALLATION INSTRUCTIONS

Metro Track
Flat Aluminum
Hardware

The enjoyment of your hardware should be everlasting, which is why our

products come with a limited lifetime warranty. The warranty applies to the

original owner, requires a proof of purchase (hang on to your receipt!) and

covers defects in material or craftsmanship. Hardware must have been properly

installed. We reserve the right to determine if your hardware warrants a repair

or a replacement. Visit smithandnoble.com/guarantee to see full details. In

need of warranty service? Call us at 800.248.8888 and we’ll arrange for a repair

or replacement ASAP.

© 2019 Smith & Noble Home, Inc. All Rights Reserved SN0419

Wall Mount

Double Rod Set

Everything

Table of Contents

Step 1 -

Getting Started ..................................3

You Need

A Smooth Set-Up

We want you to love your new hardware and that includes

having a smooth installation experience. We suggest saving

this guide. If you encounter any difculties or questions,

please reach out to us for help. It’s why we’re here. Call us at

800.248.8888 for more info on installation.

We recommend you hold on to all packaging until your

hardware is fully installed. Should something go wrong (we

strongly doubt it), we want any potential returns to be a

painless as possible.

Overview - Wall Mount Double Rod Set .......................4

Step 2 - Mounting the Brackets ........................5 - 6

Step 3 - Attaching the Rod Connector ......................7

Step 4 - Adding or Removing Carriers & End Stops ......8 - 10

Step 5 - Attaching Bracket Posts ..........................11

Step 6 - Attaching the Finials ............................12

Step 7 - Attaching Back Rod Clips ........................13

Step 8 - Attaching Bracket Posts to Bracket Bases ..........14

Step 9 - Attaching Back Rod .............................15

Step 10 - Attaching Drapery to Rod ........................16

Accessories - Baton/Wand ...................................17

Care & Cleaning ...........................................18

Customer Service Hours

Monday — Friday: 6am — 6pm PT

Saturday — Sunday: 7am — 4pm PT

smithandnoble.com

smithandnoble.com

1

Warranty ..........................................Back Cover

800.248.8888

2

STEP 1 - GETTING STARTED OVERVIEW

BOLT

ANCHOR

TOGGLE

BOLT

Tools & Parts

Before you begin, check the accompanying diagram to make sure you have all the parts you
need.

You’ll need to make sure the surface you intend to install your hardware is sturdy enough
to accommodate the brackets. If you’re screwing directly into a surface this means locating
wood studs that are strong enough to securely bond with the included screws. Otherwise,
you’ll need to use a secure fastener (as illustrated) but please note this piece is not included.

WALLBOARD OR PLASTER:

Hollow wall applications: Use a secure fastener designed

speci cally for this purpose.

METAL:

Prepare by pre-drilling holes and then using the included screws.

CONCRETE, STONE, BRICK OR TILE:

Use a masonry drill and surface-speci c plugs, anchors, or screws. When selecting a fastener

be sure it’s designed to support the weight of the product being installed (if you’re not sure,
either give us a call or ask a professional at your local hardware store). Once obtained, follow
the fastener manufacturer’s instructions regarding proper installation.

TOOLS YOU WILL NEED TO INSTALL YOUR HARDWARE:

Pencil, screwdriver, ¼" nut driver, level, and a drill with a

Note: It’s important to monitor the amount of pressure you apply when using a drill. If the
screws are too tight this may cause the screw itself to break off in the wall or window frame.

MOLLY

7

⁄64" drill bit.

SELF DRILLING

BACK
PLATE

SET
SCREW

HEX
SCREW

MOUNTING
POST

BACK
ROD

MOUNTING
PLATE

Metro Track Flat Aluminum Double Rod Set

MOUNTING
CLIP

MOUNTING POST
CHANNELS

COVER
PLATE

MOUNTING
POST

MASTER
CARRIER

MOUNTING
CLIP

CARRIERS

BACK ROD
END CAP

END
STOP

FRONT
ROD
FINIAL

SCREWS

ALLEN WRENCHES

PENCIL & SCREWDRIVER

(NOT INCLUDED)

smithandnoble.com 800.248.8888

3

SET SCREWS

WALL MOUNT BRACKET CENTER SPLICE BRACKET

(BACK ROD)

(FRONT ROD)

CARRIERS

POWER DRILL & LEVEL

(NOT INCLUDED)

MOUNTING CLIPS

SPLICE COVER

SET
SCREW

MOUNTING
BRACKET

MOUNTING
POST

SPLICE
BRACKET

(Depending on your rod, use
bracket for rods that are spliced.)

END STOP

4