Smeg VSTQ20 Specifications Sheet
undermount sink, 20cm net width, single bowl, satin stainless steel
Smeg undermount sinks are
designed and suitable to be
mounted below stone benches
such as marble and granite,
and quartz resin benchtops.
PLEASE NOTE: when cutting the
benchtop, always have the actual
sink at hand for checking. This
should ensure accuracy in the
aesthetic detail of the nished
installation
overall dimensions 240mmW x 438mmD x 205mmH (NB: height does not include waste reducer)
after installation size 200mm x 400mmD x 205mmH
sink volume 16 litres
nish satin stainless steel
material AISI 304, non magnetic, 1.2mm gauge
supplied lira plumbing kit
template
instructions
designer plug/waste reducer
clips
warranty 10 years on sink, 2 years on plug/waste reducer
optional accessory
compact stainless steel colander
VSH20Q
overall 202mmW x 428mmD x
120mmH
net 150mmW x 380mmD x
120mmH
ID171111
Code VSTQ20
20
398
438
>
undermount sink, 20cm net width, single bowl, satin stainless steel
240
20
>
<
<
85
undermounting
surface
90
PLAN
> <
240
c
/
20
>
> <
> <
> <2020
85
90
205
438
398
<
20
205
>
>
SIDE ELEVATION
PLEASE NOTE: always have the actual sink
at hand when cutting out the benchtop to
ensure accuracy
>
>
> <
90
5
FRONT ELEVATION
packaged dimensions 490mm x 490mm x 285mm
volume
net weight 3.74kg
gross weight 5.17kg
satin stainless steel AISI 304, non-magnetic 1.2mm gauge
bowl capacity 398mmW x 200mmD x 200mmH = 15.92litres
supplied plumbing installation kit
0.069m³
instructions
template
designer plug and waste reducer
clip
NB: drawings are not to scale — they are to assist only
WARNING: technical specifications and product sizes can be varied by the manufacturer, without notice.
Cutouts for appliances should only be by physical product measurements. The above information is
indicative only.
ID171111
Code VSTQ20
Loading...