Smeg UM45A Specifications Sheet

UM30A-34A-45A

Smeg undermount sinks

UM30A

code UM30A

net dimensions: 300mmW x 400mmD x 180mmH inner radiused corners: 72mm

22 litre capacity

net dimensions: 340mmW x 400mmD x 180mmH inner radiused corners: 72mm

24 litre capacity

EAN: UM30A 8017709175115 EAN: UM34A 8017709175122 EAN: UM45A 8017709175139

• supplied with luxury Lira designer waste reducers

• 90mm diameter waste holes, suit most food waste-

disposer installation

• 1mm gauge stainless steel

• non-magnetic 18/10 commercial grade stainless steel

(AISI 304)

• anti-drum insulation applied to underside of bowl

IMPORTANT NOTE When undermounting the sink below stone, corian or quartz resin benchtops, always have the actual sink at hand when cutting out the bench to ensure accuracy.

code UM34A

UM45AUM34A

code UM45A

net dimensions: 450mmW x 400mmD x 180mmH inner radiused corners: 72mm 32 litre capacity

optional accessories

TS30 chopping board, code 9239 320mmW x 420mmD x 20mmH

removable dish rack 220mmW x 165mmD x 90mmH

DB30 s/s crockery basket with removable dish rack, code 9239 330mmW x 390mmD x 155mmH

WARNING: technical speciﬁcations and product sizes can be varied by the manufacturer, without notice. Cutouts for appliances should only be by physical product measurements. The above information is indicative only.

CB34 chopping board 360mmW x 420mmD x 20mmH

DB34 s/s crockery basket with removable dish rack, code 9238 330mmW x 390mmD x 155mmH

TS45 chopping board, code 9245 470mmW x 420mmD x 25mmH

DB45 s/s crockery basket with removable dish rack, code 9245 435mmW x 265mmD x9 0mmH

ID230413

Smeg undermount sinks

UM30

UM45UM34

PLEASE NOTE: drawings are not to scale — they are to assist only

ID230413