Smeg STK70X34 Specifications Sheet
to suit 60cm and 70cm cabinets
Please note: smeg 34 litre microwave ovens and convection microwave ovens can be installed
with either a 60cm (596mm) wide or 70cm (696mm) wide trimkit
34 litre
SA35MX microwave oven
SA37X microwave oven
60cm trimkit, model STK60X34, code 24314
70cm trimkit, model STK70X34, code 24322
Trimkit
TO SUIT SA35MX, SA37X,
SA987CX
570
425
330
596 (60cm)
696 (70cm)
21
cupboard or void
MICROWAVE
OVEN SPACE *
600 or 700
internal width
oven, cupboard,
drawers or void
50min
vents
426±1600
50min
cupboard or
void
●
●
MICROWAVE
OVEN SPACE
515**
426±1
21
oven
FRONT
cupboard,
drawers or void
FRONT ELEVATION
cupboard,
drawers or void
SIDE ELEVATION
*PLEASE NOTE: The internal width of the microwave oven/convection microwave oven cabinet must be 60cm
wide for the 60cm-wide trimkit, and 70cm wide for the 70cm-wide trimkit.
NB drawings are not to scale — they are to assist only
WARNING: technical specifications and product sizes can be varied by the manufacturer, without notice.
Cutouts for appliances should only be by physical product measurements. The above information is
indicative only.
ID040711
to suit 60cm and 70cm cabinets
underbench
microwave oven, convection microwave, oven underbench mounting with trimkit
Microwave ovens and convection microwave ovens are venting cooking appliances. They must be able to
‘breathe’, otherwise their purpose, performance and longevity are compromised.
A wall-mounted microwave unit, with an accompanying trimkit, can vent to the front via designed gaps in the
trimkit but most of the venting is actually done through the venting channel created at the rear of the kitchen
cabinet.
A freestanding microwave oven, that is, sitting on an open kitchen bench or an open raised shelf, is perfectly
able to vent and cool itself in this unrestrictive space.
An underbench-mounted microwave oven, particularly one installed with a trimkit, also needs to be able
to exchange air in its immediate vicinity and cool itself. Since rear upward venting is impossible as the
enclosed kitchen bench prohibits such venting, the air from at least one adjacent cabinet plus the air below
the platform on which the microwave oven sits must be accessed. Simply ensure long, open slots or multiple
round holes access the adjacent cabinetry through the rear side walls and floor of the microwave oven
space. This venting will alleviate the possible sweating and overheating of the microwave oven. The more
access to air the microwave unit has, the better its performance and the less damage to cabinetry due to
heat and moisture.
air circulation
426±1
the depth, that is, front to back measurement of the
two vertical and the floor slots, should be as large as
practicable,
100mm minimum depth x 300mm minimum length
600 or 700
NB drawings are not to scale — they are to assist only
WARNING: technical specifications and product sizes can be varied by the manufacturer, without notice.
Cutouts for appliances should only be by physical product measurements. The above information is
indicative only.
ID040711
Loading...