Smeg SF112U User Manual

Table of Contents

1 Installation 6

1.1 General installation instructions 6

1.2 Electrical requirements 7

1.3 Electrical connection 8

1.4 Cable replacement 10

1.5 Positioning 10

Important Safety Instructions

WARNING: If the instructions contained in this manual are not followed

precisely, fire or explosion may result causing property damage, personal injury or death.

NOTE: This appliance must be installed solely and exclusively by a qualified technician. Any technical procedures must be carried out by an authorized technician.

READ AND SAVE THESE INSTRUCTIONS - Your safety and the safety of

others are very important. We have provided many important safety messages throughout this manual and on the appliance. Read all the instructions before using the appliance and always obey all safety messages.

RECOGNIZE SAFETY INFORMATION

This is a safety alert symbol. This symbol alerts you to potential hazards that can result in severe personal injury or death.

UNDERSTAND SIGNAL WORDS

A signal word - DANGER, WARNING or CAUTION - is used with the safety alert symbol. DANGER denotes the most serious hazards. It means you could be killed or seriously injured if you do not immediately follow the instructions. WARNING means you could be killed or seriously injured if the instructions are not followed. CAUTION indicates a potentially hazardous situation which, if not avoided, could result in minor to moderate injury.

Important Safety Instructions

• This appliance is intended for home use only.

• Use this appliance only for its intended purpose. The manufacturer cannot be held liable for damage caused by

WARNING

The safety messages will inform you of potential hazards, how to avoid the risk of injury and what can occur if the instructions are not followed.

IMPORTANT: Installation and grounding must conform to applicable codes. Observe all codes and ordinances in force.

WARNING: For your safety, the instructions contained in this manual must be followed to minimize the risk of fire or explosion and to prevent property damage, personal injury or death.

improper use of this appliance.

• This appliance complies with current safety regulations. Improper use of this appliance can result in personal injury and material damage.

• Read all the instructions before installing or using the appliance for the first time.

• Keep these operating instructions in a safe place and pass them on to any future user.

Do not store or use gasoline or other flammable vapors, liquids or materials near this or any other appliance.

NOTE: This appliance is NOT designed for installation in manufactured (mobile) homes or in recreational vehicles (RVs).

DO NOT install this appliance outdoors.

WARNING

• Read all instructions

• Proper installation is your responsibility. Have a qualified technician install and ground this appliance in accordance with these installation instructions.

• It is the responsibility of the installer to comply with installation information specified on the model/serial ID plate. The ID Plates are visibly located on the back of the appliance and on the oven door frame. These ID plates must never be removed.

To reduce the risk of fire, electrical shock, personal injury or damage when using the appliance, follow basic safety precautions, including the following:

Important Safety Instructions

• ELECTRICAL GROUNDING REQUIRED: See the “Electrical Requirements” section. It is the customer’s responsibility to:

• Contact a qualified electrician to install the appliance

• Ensure that the electrical system is adequate and conforms with the national ANSI / NFPA 70 ELECTRICAL CODE – latest edition – Or the CANADIAN ELECTRICAL CODE, C22.11 – 1 and C22.2 No. 01982 – or latest edition – and all local codes and ordinances. IMPORTANT: Observe all governing codes and ordinances.

• Make sure that all the appliance controls are in the OFF position before plugging the electrical cord into an outlet.

• Never modify or alter the construction of the appliance. For example, do not remove adjustable legs, panels, wiring or anti-tip brackets/screws.

CAUTION: This unit is designed as a cooking appliance. For safety purposes, never use it for warming the room or as a space heater.

• Do not obstruct oven vents or openings for heat exhaust.

• Test the appliance immediately after installation, following the instructions in this booklet. If the appliance does not work properly, disconnect it from the electrical power supply and call the

service center. DO NOT attempt to repair the appliance.

• All adjustments and servicing must be performed by qualified installers or service technicians.

• Do not leave the packing material around the home. Sort the various items of waste and take them to the nearest specialized waste collection facility.

How to read the user manual

This user manual uses the following reading conventions:

Installation

Information for the qualified technician: installation, operation and inspection.

Safety instructions

Information

Advice

1. Order of use instructions.

• Stand-alone instruction.

SAVE THESE INSTRUCTIONS

Installation

1 Installation

1.1 General installation instructions

• Proper installation is your responsibility. Have a qualified

technician install this oven. Make sure you have everything necessary for correct installation. It is the responsibility of the installer to comply with installation guidelines specified on the model/serial ID plate. The model/serial ID can be found on the internal frame of the oven when the door is opened.

• Have your oven installed and

properly grounded by a qualified installer, in accordance with these installation instructions. Grounding is

mandatory according to the provisions of the electrical system safety regulations. If this appliance is connected to an outside electrical power source, it must be grounded in compliance with local laws, or, if no local laws exist, in compliance with the national ANSI/NFPA 70 code of electrical regulations.

• Make sure that the voltage and dimensions of the supply line correspond to the information indicated on the model/serial rating plate. A multi-pole circuit breaker must be available on the supply line with contact gap equal to or greater than 3mm, located in an easily accessible position near the appliance.

• Do not attempt to repair or replace any part of your oven unless specifically recommended in this manual. All other service procedures should be performed by a qualified technician.

• This oven is not suitable for installation and use in mobile homes or campers.

• Electrical grounding is required. See the “Electrical requirements” section. It is the customer’s responsibility to:

1. Contact a qualified electrical installer.

2. Ensure that the electrical system is adequate and in compliance with the national ANSI/NFPA 70 ELECTRICAL CODE - latest edition - or the CANADIAN ELECTRICAL CODE, C22.11 - 1982 and C22.2 No. 01982

- or latest edition - and all local codes and ordinances.

IMPORTANT: Observe all codes and ordinances in force.

+ 8 hidden pages