Page 1
Gebrauchs- und Montageanweisung
Induktions-Glaskeramik-Kochfeld
Instructions for fitting and use
Glass ceramic induction hob
Instructions de montage et d’utilisation
Table de cuisson vitrocéramique à induction
Gebruiks- en montage-instructies
Keramische inductiekookplaat
Istruzioni per uso e montaggio
Piano di cottura ad induzione in vetroceramica
Instrucciones para el uso y montaje
Encimera vitrocerámica per inducción
Manual de instruções de uso e de montagem
Placa de cozinhar de indução em vitrocerâmica
Οδηγίες χρήσης καί συναρµολόγησης
Επαγωγικό υαλοκεραµικό πεδίο µαγειρέµατος
Instrukcja obsługi i montażu
Indukcyjna płyta kuchenna ze szkła ceramicznego
Használati és szerelési utasítás
Indukciós üvegkerámia-főzőtér
224898 N21
Page 2
GB
Disposing of the packaging
Please ensure the environmentally-friendly disposal of the
packaging that came with your appliance. Recycling the
packaging material saves on resources and cuts down on waste.
Disposing of old appliances
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it must be handed
over to a collection point for the recycling of
electrical and electronic equipment.
By ensuring that this product is disposed of
correctly you will help to protect the environment
and human health, which could otherwise be harmed through the
inappropriate disposal of this product. For more detailed
information about recycling of this product, please contact your
local city office, your household waste disposal service or the
shop where you purchased the product.
Appropriate use
• The hob is designed for installation in a worktop.
• The hob is to be used solely for preparing food in the home. It
may not be used for any other purpose.
For your information...
Please read this manual carefully before using your appliance. It
contains important safety advice; it explains how to use and look
after your appliance so that it will provide you with many years of
reliable service.
Should a fault arise, please first consult chapter “What to do if
trouble occurs?”. You can often fix minor problems yourself,
without having to call in an engineer.
Please keep this manual in a safe place and pass it on to new
owners for their information and safety.
Safety instructions................................................................. 14
Connection and operation..................................................... 14
For the hob ........................................................................... 14
For persons........................................................................... 14
Appliance description ........................................................... 15
Operating the hob with the touch keys ................................. 15
Operations.............................................................................. 16
The hob................................................................................. 16
Some instructions on cookware............................................ 16
How to cut power consumption............................................. 16
Switching on a cooking zone................................................ 17
Switching off a cooking zone................................................ 17
Automatic switch-off (timer) .................................................. 17
Residual heat display............................................................ 17
Lock /child safety device....................................................... 18
Safety switch-off ................................................................... 18
Other functions ..................................................................... 18
Protection against overheating ............................................. 18
Cleaning and Care ................................................................. 19
Glass ceramic hob................................................................ 19
Specific soiling...................................................................... 19
What to do if trouble occurs................................................. 20
Instructions for assembly ..................................................... 21
Safety instructions for the kitchen fitter................................. 21
Installation............................................................................. 21
Ventilation............................................................................. 21
Start of operation.................................................................. 23
Technical data ...................................................................... 23
Electrical connection............................................................. 23
13
Page 3
Safety instructions
GB
Safety instructions
Connection and operation
• The appliances are constructed in accordance with the relevant safety regulations.
• Fitting a mains socket, repairing and servicing the appliance
are jobs that should be left to a qualified electrician according
to valid safety regulations. For your own safety, do not allow
anyone other than a qualified service technician to install, service or repair this appliance.
For the hob
• Owing to the very fast reaction at the high power setting
(max. power setting), do not use the induction hob without
supervision!
• When cooking, pay attention to the heat-up speed of the
cooking zones. Avoiding boiling the pots dry as there is a risk
of the pots overheating!
• Do not place empty pots and pans on cooking zones which
have been switched on.
• Take care when using simmering pans for the simmering water
may dry up unnoticed, resulting in damage to the pot and to
the hob, in the event of which no liability will be assumed.
• Immediately switch off the cooking zone after using with the
respective
nition.
• Overheated fats and oils may spontaneously ignite. Prepare
meals with greases and oils only under control. Never extinguish ignited fats and oils with water! Put the lid on the pan and
switch off the cooking zone.
• The glass ceramic hob is extremely robust. Avoid dropping
hard objects onto the glass ceramic hob. Pointed objects falling onto your hob might break it.
• If cracks, fractures or any other defects appear in your glass
ceramic hob, immediately switch off the appliance. Disconnect
fuse immediately and call the Customer service.
• If the hob cannot be switched off due to a defect in the sensor
control immediately disconnect your appliance and call the
Customer service.
• Take care when working with attachments! The connecting
cable must not contact the hot cooking zones.
• The glass ceramic hob should not be used as a storage area.
• Do not put kitchen foil or plastic onto the cooking zones. Keep
everything which could melt, such as plastics, foil and in particular sugar and sugary foods away from the hot cooking zone.
Remove sugar immediately from the hob when it is still hot with
a scraper to avoid damage
• Metal objects, e.g. kitchen utensils, cutlery, must not be left on
the surface of the induction hob as they can become hot.
• Do not place combustible, volatile or heat deformable objects
directly underneath the hob.
• Take care with metal objects which are worn on the body if
they come into the direct vicinity of the induction hob as they
can become hot. Non-magnetisable objects (e.g. gold or silver
rings) are not affected.
• Do not heat any unopened food cans or laminated packing on
the hob. There is a risk of bursting!
sensor key ON/OFF
and not just by pan recog-
• Be especially careful to keep the sensor keys clean since soiling could be mistaken for finger contact by the appliance.
Never put anything (pans, tea towels etc.) onto the sensor
keys!
If food boils over onto the sensor keys, we advise you to activate the OFF key.
• Hot pans should not cover the sensor keys, otherwise the
appliance switches itself off automatically. In this case the
oven automatically shuts off.
• If there are any pets in the apartment which could come near
the hob, activate the childproof lock.
• The induction hob may not be used when the pyrolysis mode is
in operation.
For persons
•Caution!
People who are not familiar with the built-in hob must only be
allowed to operate it under supervision. Generally keep little
children away from the appliance and never allow them to play
with the appliance.
• Attention!
The surfaces of the heating and cooking zones become hot
during use. Keep small children away at all times.
• Persons with cardiac pacemakers or implanted insulin pumps
must make sure that their implants are not affected by the
induction field (the frequency range of the induction field is 2050 kHz).
14
Page 4
Appliance description
GB
Appliance description
The decorative design may deviate from the illustrations.
1. Front left induction cooking zone
2. Back left induction cooking zone
3. Back right induction cooking zone
4. Front right induction cooking zone
5. Touch-Control operating panel
6. Control keys, front left cooking zone
7. Control keys, back left cooking zone
8. Timer control keys for the back right cooking zone
9. Control keys, back right cooking zone
10. Control keys, front right cooking zone
11. ON/OFF key
12. Minus key (lower)
13. Plus key (raise)
14. Power setting display
Operating the hob with the touch keys
The glass ceramic hob is operated by means of “touch control”
sensor keys which are located at the front of the hob.
The touch keys are operated as follows: with your fingertip, lightly
touch the symbols , or on the glass ceramic surface.
For purposes of simplification, the following describes the “keys“.
ON/OFFf key (11)
This key is used to switch the respective cooking zones on and
off.
Minus key (12) Plus key (13)
These keys are used to select the required power setting from 1
to 9.
Important!
front right simultaneously will activate the child safety device on
the left or the right (symbol ).
Power setting display (14)
The power setting display shows the power setting which has
been selected, or if the cooking zone is switched off it will indicate
The power setting display will blink for pan detection.
off.
activated.
A row of dashes or “F7” will be displayed when the overheat
protection device has been activated.
Pressing the two cooking zone keys for front left and
for residual heat present.
will be displayed when the safety cut-off device has switched
will be displayed when the child safety device has been
15
Page 5
Operations
GB
Operations
The hob
The hob is equipped with an induction cooking mode. An
induction coil underneath the glass ceramic hob generates an
electromagnetic alternating field which penetrates the glass
ceramic and induces the heat-generating current in the pot base.
With an induction cooking zone the heat is no longer transferred
from a heating element through the cooking pot into the food
being cooked but the necessary heat is generated directly in the
container by means of induction currents.
Advantages of the induction hob
– Energy-saving cooking through the direct transfer of energy to
the pot (suitable pots/pans made of magnetisable material are
required).
– Increased safety as the energy is only transferred when a pot
is placed on the hob.
– Energy transfer between induction cooking zone and pot base
with high efficiency.
– High heat-up speed.
– The risk of burns is low as the cooking area is only heated
through the pan base, any food which boils over does not stick
to the surface.
– Rapid, sensitive control of the energy supply.
Pan recognition
If a cooking zone is switched on and there is no pan on the zone
or if the pan is too small, there will be no transmission of power
and the power setting display will blink.
If a suitable pot or pan is placed on the cooking zone, the power
setting will switch on and the power setting display will light up.
The power supply will be cut off when the pan is removed and the
power setting display will blink. If the pots and pans placed on the
cooking zone are of smaller dimension, and the pan recognition
still switches on, then the power supply will take place with less
power.
Some instructions on cookware
The cookware used for the induction cooking zone must be made
of metal, have magnetic properties and a sufficient base area.
Only use pots with a base suitable for induction
Suitable cookware Unsuitable cookware
.
Magnet test:
Move the magnet towards the base of your cookware.
If it is attracted, you can use the cookware on the induction hob.
Note!
When using pans suitable for induction from some
manufacturers, noises may occur which are attributable to the
design of these pans.
Take care when using simmering pans for the simmering water
may dry up unnoticed, resulting in damage to the pot and to the
hob, in the event of which no liability will be assumed.
How to cut power consumption
The following are a few useful instructions to help you cut your
consumption of energy and use your induction hob and the
cookware efficiently.
• The base of your cooking pots should be the same size as the
cooking zone.
• When buying cooking pots note that it is frequently the diameter of the top of the pot that it indicated. This is usually larger
than the base of a pot.
• Pressure cookers are particularly low on energy and time
required thanks to the pressure and the fact that they are
tightly closed. Short cooking times mean that vitamins are preserved.
• Always make sure that there is sufficient fluid in your pressure
cooker since the cooking zone and the cooker may be damaged as a result of overheating if the cooker boils dry.
• Always close cooking pots with a suitable lid.
• Use the right pot for the quantity of food you are cooking.
A large pot which is hardly filled will use up a lot of energy.
Power settings
There are 9 power settings. In the chart you will find examples of
how to use each setting.
Enamelled steel pots with thick
base
Cast iron pots with an enamelled base
Pots made of multi-layer stainless steel, stainless ferrite
steel and aluminium with special base
This is how to establish the suitability of a pot:
Conduct the magnet test described below or make sure that the
pot bears the symbol for suitability for cooking with induction
current.
16
Pots made of copper, stainless
steel, aluminium, oven-proof
glass, wood, ceramic and terracotta
Cooking
level
0
1-2
3
4-5
6
7-8
9
Suitable for
Off, using remaining heat
Keeping food warm, simmering small quantities
of food
(lowest setting)
Simmering
Simmering larger quantities, roasting larger
pieces of meat through
Roasting, getting juices
Roasting
Bringing to the boil, browning, roasting
setting)
(highest
Page 6
Operations
1.
2.
3.
Suitable for induction cooking
GB
Switching on a cooking zone
1.
Press the ON/OFF key
2. Then immediately press the
(1...9). The setting can be reduced by pressing the
power setting display shows the power setting which has been selected.
3. The power setting display blinks (pan recognition). Immediately put cookware suitable for induction cooking onto the cooking zone. The pot or pan
will be heated up.
Note!
• Should the cooking zone be switched on and no power setting be selected,
the cooking zone will switch off automatically.
• Two cooking zones have been combined into one module for technical
reasons: a left module and a right module. If one cooking zone of a module
is operated at a high power setting, the power of the other cooking zone
will be reduced. The setting is indicated in the cooking setting display.
Front cooking zone Rear cooking zone
9
8
7
6
5
until the power setting “0“ blinks.
Plus key
to select the power setting
Minus key
5
6
7
8
9
. The
Switching off a cooking zone
4. Press the
4.
1.
2.
3.
any of the power settings. The control lamp will go off.
Note!
• Metal objects, e.g. kitchen utensils, cutlery, must not be left on the surface
of the induction hob as they can become hot.
• Immediately switch off the cooking zone after using with the respective
sensor key ON/OFF
Automatic switch-off (timer)
The timer can be used to automatically switch off the cooking zone at the
right back after a certain period of time. Times ranging from 1 minute to 99
minutes can be set.
1. Set a power setting for the cooking zone at the right back and put cookware onto the cooking zone.
2. Press the
key
indicate the cooking time selected. The setting can be adjusted with the
control dial at any time during the cooking process.
3. Once the time has lapsed the cooking zone will switch off and a signal will
sound. To acknowledge the signal press any of the keys for the back right
cooking zone, or alternatively, the signal will automatically stop after two
minutes.
ON/OFF key
Plus key
can be used to reduce the setting. The double-digit display will
. The cooking zone is switched off direct from
and not just by pan recognition.
of the timer to select the cooking time. The
Minus
Residual heat display
The glass ceramic hob is equipped with a “H“ residual heat display.
The ceramic hob is not directly heated, though it becomes hot due to the
effect of heat reflected by the pan.
As long as the “H“ lights up after the cooking zone has been switched off, the
residual heat can be used for melting food or for keeping food warm.
The cooking zone may still be hot when the letter “H“ no longer lights up. Risk
of burns!
17
Page 7
Operations
1.
2.
GB
Lock /child safety device
The lock can be used to block operation and settings (e.g. power setting 4).
An activated lock will remain activated even if the hob is switched off!
The lock hence also serves as a child safety device in order to prevent the
hob from being operated unintentionally or intentionally.
Switching on (left cooking zone)
1. Press the
zone simultaneously until the symbol is shown. Both of the left-hand
cookingzones are locked. As soon as a key is pressed the symbol
will re-appear to remind you of the lock function.
Switching off
2. Press the
zone simultaneously until the symbol goes off. Both of the left-hand
cooking zones will have been released again.
Note!
• It is possible to switch the cooking zone off if the lock has been activated by
means of pressing the
• Use the same procedure for locking the right-hand cooking zone.
Plus key
Plus key
and the
and the
ON/OFF key
Minus key
Minus key
. The lock will remain activated.
of the front left cooking
of the front left cooking
Power
setting
1 to 4 8 hours
5 to 7 2 hours
8 or 9 1 hour
Automatic switch-off
after ...
Safety switch-off
The appliance has an automatic time limit function. It prevents the appliance
from being in operation for a longer period of time.
The timer of the time limit function depends on the setting of the cooking
level: The higher the setting of the cooking level the faster it switches off. The
time limit function operates for each cooking zone seperately.
Important!
display. The letter will remain. In order to acknowledge, press any key of the
respective cooking zone. This will be confirmed when a double signal sounds.
After switching off the cooking zone, a will appear in the
Other functions
If two or more sensors are pressed at the same time – e.g. when a pan is
mistakenly put onto a sensor key – no function is activated. After 10 seconds
the entire electronic system will switch off and dashes will appear.
Exception: lock/child safety device.
If you continue to press a sensor key after having set the highest cooking
setting, the electronics switch off automatically after 10 seconds.
The appliance does not automatically switch on again after a power failure.
The hob is switched off if the electronics become overheated. A row of
dashes or “F7“ will appear.
Protection against overheating
If the hob is used at full power for a lengthy period, the power electronics may
no longer be cooled to the necessary extent at room temperature.
To ensure that no excessive temperatures occur in the electronics, the power
of the cooking zones may be reduced automatically.
If, during normal use of the hob and at normal room temperature, a row of
dashes or “F7” appears frequently in the cooking setting display, the cooling
is probably not sufficient. The cause may be that the kitchen units do not
have any openings for cooling purposes or that they do not have any
screening. If necessary installation must be checked.
18
Page 8
Cleaning and Care
Cleaning and Care
• Before cleaning, switch off the hob and let it cool down.
• Never clean the glass ceramic hob with a steam cleaner or
similar appliance!
• When cleaning make sure that you only wipe lightly over the
ON/OFF keys
switched on!
Glass ceramic hob
Important!
Never use aggressive cleaning agents such as rough scouring
agent, abrasive saucepan cleaners, rust and stain removers etc.
Cleaning after use
Always clean the entire hob when it has become soiled. It is
1.
recommended that you do so every time the hob is used. Use a
damp cloth and a little washing up liquid for cleaning. Then dry
the hob with a clean dry cloth to ensure that there is no detergent
left on the surface of the hob.
Weekly clean
2.
Clean the entire hob thoroughly once a week with commercial
glass ceramic cleaning agents.
Please follow the manufacturer's instructions carefully.
When applied, the cleaning agent will coat the hob in a protective
film which is resistant to water and dirt. All dirt remains on the
film and can be removed easily. Then rub the hob dry with a
clean cloth. Make sure that no cleaning agent remains on the
surface of the hob since this will react aggressively when the hob
is heated up and will change the surface.
. The hob may otherwise be accidentally
GB
Specific soiling
Heavy soiling
pearl-type stains) can best be removed when the hob is still
slightly warm. Use commercial cleaning agents to clean the hob.
Proceed as outlined under Item 2.
First soak food which has boiled over
then remove remaining soiling with a special glass scraper for
glass ceramic hobs. Then clean the hob again as described
under Item 2.
Burnt sugar
when they are still hot, with a glass scraper. Then clean the hob
again as described under Item 2.
Grains of sand
toes or clean lettuce may scratch the surface of the hob when
you move pots around. Make sure that no grains of sand are left
on the hob.
Changes in the colour
the stability of the glass ceramic material. These colour changes
are not changes in the material but food residues which were not
removed and which have burnt in.
Shiny spots
surface of the hob, particularly when cookware with an aluminium
base or unsuitable cleaning agents are used. They are difficult to
remove with standard cleaning agents. You may need to repeat
the cleaning process several times. In time, the decoration will
wear off and dark stains will appear as a result of using aggressive cleaning agents and faulty pan bottoms.
and stains (limescaling and shiny, mother-of-
with a wet cloth and
and melted plastic must be removed immediately,
which may get onto the hob when you peel pota-
of the hob will not affect the function and
result when the base of the cookware rubs on the
19
Page 9
What to do if trouble occurs
What to do if trouble occurs
Interference with and repairs to the appliance by unqualified
persons are dangerous as they can result in electric shock, or
short circuit. Do no interfere with or try to repair the appliance;
this could cause injury and damage to the appliance. Therefore
always have such work done by an expert, e.g. the technical
Customer Service.
Please note
If your appliance is faulty, please check whether you can remove
the problem yourself by consulting these instructions for use.
But there are some problems described below that you can
fix yourself.
The fuses blow regularly?
Contact a technical customer service or an electrician!
You can't switch you induction hob on?
• Has the wiring system (fuse box) in the house blown a fuse?
• Has the hob been connected to the mains?
• Have the cooking zones been deactivated (child safety
device), i.e. a is shown in the display?
• Are the sensor keys partly covered by a damp cloth, fluid or a
metallic object? Please rectify.
• Are you using unsuitable cookware? See the section on
“Cookware for induction hobs“.
Has the hob or a cooking zone suddenly switched on and is
the display showing
• Food which has boiled over or another object is currently on
the “touch-control“ sensor keys. Please clean or remove.
• The electronic unit is too hot. Check the installation of the hob.
Make sure that there is sufficient ventilation.
dashes?
GB
Is the power setting blinking?
A cooking zone has been switched on and the hob is expecting a
suitable pot or pan to be placed on the cooking zone (pan
recognition). Only when a pot has been placed on the cooking
zone will power be supplied.
Is the power setting blinking again, although a pot has been
placed on the cooking zone?
The cookware is unsuitable for induction cooking or the pot or
pan is too small.
Is the cookware you are using making noises?
This is due to technical reasons; the induction hob and the pot
are not at risk.
Does the cooling fan still operate after it has been switched
off?
This is normal since the electronic unit is being cooled down.
Is the hob making noises (clicking or cracking sounds)?
This is for technical reasons and cannot be avoided.
Does the hob have tears or cracks?
If cracks, fractures or any other defects appear in your glass
ceramic hob, immediately switch off the appliance. Disconnect
fuse immediately and call the technical Customer service.
Protection against overheating
If the hob is used at full power for a lengthy period, the power
electronics may no longer be cooled to the necessary extent at
room temperature.
To ensure that no excessive temperatures occur in the
electronics, the power of the cooking zones may be reduced
automatically.
If, during normal use of the hob and at normal room temperature,
a row of dashes or “F7” appears frequently in the cooking setting
display, the cooling is probably not sufficient.
The reason may be that there are no openings for cooling
purposes in the kitchen units or that there is no insulation. It may
be necessary to check the installation of the hob.
20
Page 10
Instructions for assembly
Instructions for assembly
Safety instructions for the kitchen fitter
• Veneers, stuck-on or plastic surfaces of surrounding furniture
must be temperature resistant (>75°C). If the veneers and surfaces are not sufficiently heat resistant they can become deformed.
• Ensure that all live connections are safely insulated when
installing the hob.
• Cover strips between the wall and the worktop behind the hob
which are made of solid wood are permissible as long as minimum clearances in accordance with the installation diagrams
are maintained.
• Minimum clearances of the hob cut-out towards the rear are to
be maintained in accordance with the installation diagram.
• For installation directly next to a tall cupboard, a safety distance of at least 40 mm. The side surface of the tall cupboard
should be fitted with heat resistant material. Due to working
requirements, however, the distance should be at least 300
mm.
• The clearance between the hob and an extraction hood must
be at least as large as that stipulated in the assembly instructions for the cooker hood.
• The packaging materials (plastic foil, polystyrene, nails etc.)
must be kept out of reach of children as these parts are potentially dangerous. Small parts can be swallowed and there is a
danger of suffocation.
Installation
Important
• If the cooking surface is located above furniture parts (side
panels, drawers, etc.), then an intermediate bottom must be
inserted at a minimum distance of 20 mm in order to prevent
accidental contact with the underside of the cooking surface.
The intermediary shelf may only be removed by tools.
• To avoid danger of fire, make sure that no combustible objects
which could easily catch fire or become deformed on exposure
to heat are directly next to or above the surface.
GB
Ventilation
• The back wall of the cabinet must be open in the area of the
cut-out in order to provide for air circulation.
• The front transverse strip of the furniture must be removed so
that an opening is provided for air flow underneath the worktop
over the entire width of the unit.
• Remove any transverse strips underneath the worktop at least
in the area of the worktop cut-out.
• The distance between induction hob and kitchen furniture
resp. built-in unit must provide for sufficient ventilation of the
induction.
• The ventilation openings must be thermically devided with the
attached screen shield. Thus a back-flow of warmed air is prevented from entering the cool air intake.
Attention!
•
The screen shield must not cover the ventilation openings. If
necessary, shorten the shield up to the furniture or built-in unit.
• Avoid excessive thermal development from below e.g. from a
baking oven without a cross flow cooling device.
• The induction hob may not be used when pyrolysis operation
is taking place in a built-in oven.
Insulation
Bottom of the hob
Front
Sealing of cooking zone
Before installation, correctly insert the sealing unit delivered with
the hob.
• In addition, make sure that no liquids can penetrate between
the edge of the hob and the worktop or between the hob and
the wall and come into contact with any electrical appliances.
• When installing a hob into an uneven worktop, e.g. with a ceramic or similar covering (tiles etc.), the seal on the hob is to be
removed and the seal between the hob and worktop made with
plastic sealing materials (putty).
The hob must under no circumstances be sealed with sili-
•
cone sealant!
hob at a later date without damaging it.
This would make it impossible to remove the
Insulation
21
Page 11
Instructions for assembly
Dimensions in mm
1
Minimum distance to adjacent walls
2
Cut-out dimension
3
Outer dimensions of the hob
4
Cable routing in rear wall
5
Installation height
GB
Working surface cut-out
Cut out the worktop recess accurately with a
good, straight saw blade or recessing
machine. The cut edges should then be sealed
so that no moisture can penetrate. The area is
cut out as illustrated.
The glass ceramic hob must have a level and
flush bearing. Any distortion may lead to
fracture of the glass panel.
Make sure that the sealing of the hob is
properly seated.
The glass ceramic hob is fastened with clips or
with brackets.
Clips
• Drive the clips into the worktop cut-out at the
intervals indicated.
It is not necessary to adjust the height due
to the horizontal stop motion device.
Important! The horizontal drive of the clips
must be flush with the worktop (avoid the
risk of breaks).
• Position the hob according to the illustration
on the left side (a), align it (b) and insert the
clips (c).
• Screws may be used to fasten the clips.
Brackets
• Insert the hob and align it.
• From the bottom, insert the brackets with
screws in the holes provided for fastening
the brackets, align the brackets and screw
them tight.
Tighten the screws with a hand screw driver
only; do not use a battery-operated screw
driver.
• In the case of thin worktops make sure that
the brackets are correctly positioned. A
metric screw must be used on the bracket to
balance it.
Important!
There is a risk of breakage if the hob is
canted or subjected to stress during installation!
22
Page 12
Instructions for assembly
GB
Start of operation
Once the hob has been installed and the power supply has been
provided (mains connected) an automatic test of the controls will
be carried out and information for customer service will be
indicated.
This indication will go off after 30 seconds or as soon as a key
has been pressed.
Briefly wipe over the surface of the hob with a sponge and soapy
water and then dry with a clean cloth.
Technical data
Dimensions
Hob Height/ Width/ Depth mm
Installation dimensions
Width/ Depth mm
Cooking zones
Back left Ø cm / kW
Front left Ø cm / kW
Front right Ø cm / kW
Back rights Ø cm / kW
Minimal diameter of the saucepan
bottom to activate the
cooking zones) Ø cm
Electrical connection
Mains voltage
Component rated voltage
Hob, total kW
Dimensions
Hob Height/ Width/ Depth mm
Installation dimensions
Width/ Depth mm
Cooking zones
Back left Ø cm / kW
Front left Ø cm / kW
Front right Ø cm / kW
Back rights Ø cm / kW
Minimal diameter of the saucepan
bottom to activate the
cooking zones) Ø cm
Electrical connection
Mains voltage
Component rated voltage
Hob, total kW
52 x 580; 600; 700 x 510
560 x 490
18/max. 2.8
18/max. 2.8
16/max. 2.0
21/max. 3.1
10
400-415V 2N~, 50-60 Hz
230 -240V
5.9
52 x 770; 800 x 510
560 x 490
18/max. 2.8
18/max. 2.8
16/max. 2.0
21/max. 3.1
10
400-415V 2N~, 50-60 Hz
230 -240V
5.9
Electrical connection
• The electrical connection must be carried out by a qualified electrician who is authorised to carry out such work!
• Statutory regulations and the connection specifications issued
by the local power supply company must be strictly observed.
• When connecting the appliance it must be ensured that there
is a device which makes it possible to disconnect it from the
mains at all poles with a contact opening width of at least
3mm. Line-protecting switches, fuses or contactors are suitable cut-out devices.
• When connecting and repairing the appliance disconnect it
from the electricity supply with one of these devices.
• Ensure that all live connections are safely insulated when
installing the oven.
• The earth wire must be so long that if the strain relief fails, the
live wires of the connecting cable are subjected to tension
before the earth wire.
• Any superfluous cable must be removed from the installation
area beneath the appliance.
• The induction hob has been fitted with a temperature-resistant
connection cable in the factory.
• Connection to the mains is carried out in accordance with the
circuit diagram, unless the connection cable is already fitted
with a plug.
• If damaged, the manufacturer or his customer service must
replace the connection cable installed with a special connection cable.
Attention!
Incorrect connection may result in the power electronics unit
being destroyed.
blue
white
green/yellow
green/yellow
brown
black
blue
green/yellow
green/yellow
white
black
brown
Dimensions
Hob Height/ Width/ Depth mm
Installation dimensions
Width/ Depth mm
Cooking zones
Back left Ø cm / kW
Front left Ø cm / kW
Right Ø cm / kW
Minimal diameter of the saucepan
bottom to activate the
cooking zones) Ø cm
Electrical connection
Mains voltage
Component rated voltage
Hob, total kW
52 x 580; 600; 700 x 510
560 x 490
16/max. 2.0
21/max. 3.1
29/max. 2.8
10
400-415V 2N~, 50-60 Hz
230 -240V
5.9
blue
white
black
green/yellow
green/yellow
brown
blue
green/yellow
white
green/yellow
black
brown
23
Loading...