Smeg S18EB, S18 User Manual
Specifications and Main Features
- Incorporated electrical-operated fan oven
- Thermostat controlled electric oven
- Movable grill
- Timer
- Inner lamp
- Measurements of the housing panel:
- Width : 596 mm
- Height : 889 mm
- Depth : 31 mm
- Measurements of the integrated part:
- Width : 554 mm
- Height : 871 mm
- Depth : 535 mm
- Specification of upper oven:
- Upper element : 800W
- Grill element : 1800 W
- Lower element : 800 W
- Specifications of lower oven:
- Oven element : 2600 W
- Total absorbed power : 4.4 KW
- Max. Amp : 20 Amp
- Electrical connection : It is earthed and meets all the regulations.
Frequently Asked Questions
- What is the oven's power?
The total absorbed is 4.4 KW while max intensity absorbed at 20 Amps.
- Do I have to preheat the oven?
No, it is possible to start baking immediately as the oven offers even heat distribution except in the case of moist baking where the oven has to be pre heated.
- How will I clean the oven?
At all times, the oven should be cleaned when it is warm and after use preferably with warm water and non-abrasive detergent.
- Where do I find the timer in the device?
The timer can be found as a control knob on the control panel that is mounted in front of the oven.
- How can I change the bulb of the oven light?
Remove the cover gently to expose the bulb, install the new one, then fix back the cover.
- Is it possible to change the direction of the door if I want?
Changing the direction of opening the door for the upper oven is also a possibility provided there isn’t enough room.
- Does the oven have any safety features?
There is, however, a safety thermostat for the lower oven as one of these features.
- What kind of foods can I prepare? At What Temperature.
All dishes need to be prepared at the same temperature so as to allow for more than one type to be placed inside the oven for a simultaneous cook.
- What do I do to take out the door of the oven to clean it.
To remove the door, it needs to be opened first and then the 4 screws of the hinge would need to be removed followed by instructions given in the manual.
User Manual
Loading...