Contents
1 Instructions 20
1.1 How to read the user manual 20
1.2 This user manual 20
1.3 Appliance purpose 20
1.4 General safety instructions 20
1.5 Manufacturer liability 21
1.6 Identification plate 21
1.7 Disposal 21
2 Description 22
2.1 General Description 22
2.2 Control panel 23
2.3 Other parts 24
3 Use 25
3.1 Instructions 25
3.2 First use 26
3.3 Using the oven 26
3.4 Cooking modes 26
4 Cleaning and maintenance 27
4.1 Instructions 27
4.2 Cleaning the surfaces 27
4.3 Ordinary daily cleaning 27
4.4 Food stains or residues 27
4.5 Removing the door 27
4.6 Cleaning the door glazing 28
4.7 Removing the internal glass panels 28
4.8 Cleaning the inside of the oven 29
4.9 Extraordinary maintenance 30
4.10 If the appliance is not working properly 31
5 Installation 32
5.1 Electrical connection 32
5.2 Positioning 33
EN
We advise you to read this manual carefully, which contains all the instructions for
maintaining the appliance's aesthetic and functional qualities.
19
Instructions
1 Instructions
1.1 How to read the user manual
This user manual uses the following reading
conventions:
Instructions
General information on this user
manual, on safety and final
disposal.
Description
Description of the appliance and its
accessories.
Use
Information on the use of the
appliance and its accessories,
cooking advice.
Cleaning and maintenance
Information for proper cleaning and
maintenance of the appliance.
Installation
Information for the qualified
technician: installation, operation
and inspection.
Safety instructions
Information
Advice
1.2 This user manual
This user manual is an integral part of the
appliance and must therefore be kept in its
entirety and in an accessible place for the
whole working life of the appliance.
1.3 Appliance purpose
This appliance is intended for cooking food
in the professional environment. Every other
use is considered improper.
This appliance must not be used by people
(including children) of reduced physical
and mental capacity, or lacking in
experience in the use of electrical
appliances, unless they are supervised or
instructed by adults who are responsible for
their safety.
1.4 General safety instructions
For your safety and to avoid damage to the
appliance, always respect the general
safety instructions indicated below. In
general
• Have qualified personnel carry out
installation and assistance interventions
according to the standards in force.
• Read this user manual carefully before
using the appliance.
• Do not modify this appliance.
• Do not try to repair the appliance
yourself or without the intervention of a
qualified technician.
• If the power supply cable is damaged,
contact technical support immediately
and they will replace it.
1. Use instruction sequence.
• Single use instruction.
20
Instructions
For this appliance
• Do not obstruct ventilation openings and
heat dispersal slots.
• Do not insert pointed metal objects
(cutlery or utensils) into the slots in the
appliance.
• Do not rest any weight or sit on the open
door of the appliance.
• Take care that no objects are stuck in the
doors.
• Do not use the appliance to heat rooms
for any reason.
1.5 Manufacturer liability
The manufacturer declines all liability for
damage to persons or property caused by:
• use of the appliance other than the one
envisaged,
• non-observance of the user manual
provisions,
• tampering with any part of the
appliance,
• use of non-original spare parts.
1.6 Identification plate
The identification plate bears the technical
data, serial number and brand name of the
appliance. Do not remove the identification
plate for any reason.
1.7 Disposal
This appliance must be disposed of
separately from other waste
(Directives 2002/95/EC, 2002/
96/EC, 2003/108/EC). The appliance
does not contain substances in quantities
sufficient to be considered hazardous to
health and the environment, in accordance
with current European directives.
To dispose of the appliance:
• Remove the doors and leave the
accessories (racks and trays) in their
usual working positions, so that children
cannot get stuck in the oven
compartment.
• Cut the power supply cable and remove
it along with the plug.
Power voltage
Danger of electrocution
• Disconnect the main power supply.
• Disconnect the power cable from the
electrical system.
• Consign the appliance to the
appropriate selective collection centres
for electrical and electronic equipment
waste, or deliver it back to the retailer
when purchasing an equivalent product,
on a one for one basis.
Our appliances are packed in nonpolluting and recyclable materials.
• Consign the packing materials to the
appropriate selective collection centres.
Plastic packaging
Danger of suffocation
• Do not leave the packaging or any part
of it unattended.
• Do not let children play with the
packaging plastic bags.
EN
21
2 Description
2.1 General Description
1 Control panel
2 Oven light
3 Seal
4 Door
5 Oven fan
6 Rack/tray support frames
Description
Basic model
22
Frame shelf
Description
2.2 Control panel
Basic model
Temperature/function knob (1)
This knob allows you to select the cooking
temperature.
Turn the knob clockwise to the required
value, between the minimum and maximum
settings.
Thermostat indicator light (2)
When the indicator light is fixed, it indicates
that the oven is heating up to reach the set
temperature. Once the temperature has
been reached, the indicator light comes on
and goes off to indicate that the
temperature is being kept constant.
EN
Timer indicator light (3)
When off, it indicates the beginning of
timed cooking. When on, it indicates that
timed cooking has finished.
Timer knob (4)
This knob allows you to select manual or
timed cooking. Turn the knob to symbol
for manual cooking or to the numbers to
select the minutes of cooking. Once the
countdown has finished, the knob will
automatically return to the “0” position, the
oven switches off and a beep sounds to
indicate the end of cooking.
23
Description
2.3 Other parts
Shelves
The appliance features shelves for
positioning trays and racks at different
heights. The insertion heights are indicated
from the bottom upwards (see 2.1 General
Description).
Internal ventilation
The counter rotating fan(s) deactivate
automatically when the door is opened and
resume operation when the door is closed.
Interior lighting
The oven interior lighting comes on when
the door (depending on the model) is
opened or any function is selected.
Safety thermostat
The appliance is equipped with a safety
device that triggers in case of serious
malfunction. To re-arm the safety device
press the button on the back.
Contact technical support
immediately after the safety device
has triggered to check if there are
any faults.
24
Use
3 Use
3.1 Instructions
High temperature inside the oven
during use
Danger of burns
• Keep the oven door closed during
cooking.
• Protect your hands wearing heat
resistant gloves when moving food
inside the oven.
• Do not touch the heating elements inside
the oven.
• Do not pour water directly onto very hot
trays.
• Do not allow children to get near the
oven when it is in operation.
• If you need to move food or at the end
of cooking, open the door 5 cm for a
few seconds, let the steam come out,
then open it fully.
High temperature inside the oven
during use
Danger of fire or explosion
• Do not spray any spray products near
the oven.
• Do not use or leave flammable materials
near the oven.
• Do not use plastic kitchenware or
containers when cooking food.
• Do not put sealed tins or containers in
the oven.
• Do not leave the oven unattended
during cooking operations where fats or
oils could be released.
• Remove from the oven compartment all
trays and racks not used during cooking.
Improper use
Risk of damage to enamelled
surfaces
• Do not cover the bottom of the cooking
compartment with aluminium or tin foil
sheets.
• If you wish to use greaseproof paper,
place it so that it will not interfere with the
hot air circulation inside the oven.
• Do not place pans or trays directly on
the bottom of the cooking compartment.
• Do not pour water directly onto very hot
trays.
EN
25
Use
3.2 First use
1. Remove any protective film from the
outside or inside of the appliance,
including accessories.
2. Remove any labels (apart from the
technical data plate) from the
accessories and from the cooking
compartment.
3. Remove and wash all the appliance
accessories (if fitted) (see 4 Cleaning
and maintenance).
4. Heat the empty oven at the maximum
temperature to burn off any residues left
by the manufacturing process.
3.3 Using the oven
The oven is designed for a
maximum load of 3.5 kg.
Switching the oven on
3.4 Cooking modes
Defrosting
The movement of air at room
temperature causes frozen food to
defrost quickly. This type of rapid
defrosting is ideal as the taste and
appearance of the de-frozen food,
whether previously deep-frozen or
frozen in the freezer, remain
unaltered.
Normal cooking
Using the fan and the circular
heating elements (incorporated in
the rear of the oven) allows you to
cook different foods on several
levels. Hot air circulation ensures
instant and uniform distribution of
heat.
To switch the oven on:
1. Select the cooking temperature and
function using the temperature knob.
2. Select the cooking time or set manual
cooking using the timer knob.
26
Cleaning and maintenance
4 Cleaning and maintenance
4.1 Instructions
Improper use
Risk of damage to surfaces
• Do not use steam jets for cleaning the
appliance.
• Do not use cleaning products containing
chlorine, ammonia or bleach on steel
parts or parts with metallic finishes on the
surface (e.g. anodizing, nickel- or
chromium-plating).
• Do not use abrasive or corrosive
detergents on glass parts (e.g. powder
products, stain removers and metallic
sponges).
• Do not use rough or abrasive materials
or sharp metal scrapers.
4.2 Cleaning the surfaces
To keep the surfaces in good condition,
they should be cleaned regularly after use.
Let them cool first.
4.3 Ordinary daily cleaning
Always use only specific products that do
not contain abrasives or chlorine-based
acids.
Pour the product onto a damp cloth and
wipe the surface, rinse thoroughly and dry
with a soft cloth or a microfibre cloth.
4.4 Food stains or residues
Do not use metallic sponges or sharp
scrapers as they will damage the surfaces.
Use ordinary non-abrasive products with
the aid of wooden or plastic utensils if
necessary. Rinse thoroughly and dry with a
soft cloth or a microfibre cloth.
4.5 Removing the door
For easier cleaning, the door can be
removed and placed on a canvas.
To remove the door proceed as follows:
1. Open the door completely and insert two
pins into the holes on the hinges
indicated in the figure.
2. Grasp the door on both sides with both
hands, lift it forming an angle of around
30° and remove it.
EN
27
Cleaning and maintenance
3. To reassemble the door, put the hinges in
the relevant slots in the oven, making sure
that grooved sections A are resting
completely in the slots. Lower the door
and once it is in place remove the pins
from the holes in the hinges.
4.7 Removing the internal glass
panels
For easier cleaning the door internal glass
panels can be disassembled.
1. Remove the internal glass panel by
pulling the rear part gently upwards,
following the movement indicated by the
arrows (1).
2. Then, pull the front part upwards (2). In
this way, the 4 pins attached to the glass
detach from their housings in the oven
door.
4.6 Cleaning the door glazing
The glass in the door should always be kept
thoroughly clean. Use absorbent kitchen
roll. In case of stubborn dirt, wash with a
damp sponge and an ordinary detergent.
We recommend the use of
cleaning products distributed by
the manufacturer.
28
3. Clean the external glass panel and the
panels previously removed. Use
absorbent kitchen roll. In case of
stubborn dirt, wash with a damp sponge
and neutral detergent.
4. Reposition the internal glass panel. Take
care to centre and insert the 4 pins into
Cleaning and maintenance
their housings in the oven door by
applying slight pressure.
4.8 Cleaning the inside of the oven
For the best oven upkeep, clean it regularly
after having allowed it to cool.
The oven should be operated at
the maximum temperature for
about 15-20 minutes after the use
of specific products, to burn off the
residues left inside the oven.
EN
To remove the guide frames, pull the frame
upwards to unhook it from its groove, then
slide it out of the seats at the back.
For easier cleaning, remove the
door.
Removing racks/trays support frames
Removing the guide frames enables the
sides to be cleaned more easily.
unscrew the fastening pins of the frame.
When cleaning is complete, repeat the
above procedures to put the guide frames
back in.
29
Cleaning and maintenance
4.9 Extraordinary maintenance
Live parts
Danger of electrocution
• Disconnect the oven power supply.
Replacing the internal light bulb
1. Completely remove all accessories from
inside the oven.
2. Remove the racks/trays support frames.
3. Remove the bulb cover using a tool (e.g.
a screwdriver).
Incandescent lamps:
4. Unscrew and remove the lamp.
5. Replace the lamp with one of the same
type (25W).
6. Replace the cover correctly, so that the
moulded part of the glass is facing the
door.
7. Press the cover completely down so that
it attaches perfectly to the bulb support.
Removing the door seal
To permit thorough cleaning of the oven, the
door seal may be removed. There are
fasteners on all four sides and in the middle
to attach it to the edge of the oven. Pull the
edges of the seal outwards, where
indicated to detach it.
30
Cleaning and maintenance
4.10 If the appliance is not working
properly
Problem Likely solution
The oven is not working
Foods either take too long or too little to
cook
Moisture forms inside the oven and on the
foods
This product meets the current safety
regulations in force for electrical
appliances. To prevent safety hazards for
users, all technical inspections or repairs
must be carried out by qualified personnel.
• The timer knob is positioned on 0.
• The plug is not properly inserted in the
socket.
• The electrical system is damaged or not
working properly.
• The fuses have blown or the circuit breakers
have not been activated.
• The temperature setting is incorrect.
• The foods are being left in the oven for too
long after cooking. Do not leave them in the
oven for more than 15-20 minutes after the
end of the cooking time.
EN
If the appliance is not working
properly, before calling Customer
Service, ensure that the
procedures listed below have
been performed.
31
Installation
5 Installation
5.1 Electrical connection
Power voltage
Danger of electrocution
• Have the electrical connection
performed by authorised technical
personnel.
• The appliance must be connected to
earth in compliance with electrical
system safety standards.
• Disconnect the main power supply.
• Do not pull the cable to remove the
plug.
• Use H07RN-F cables withstanding a
temperature of at least 90°C.
• The tightening torque of the screws of
the terminal supply wires must be 1.5 - 2
Nm.
The terminal indicated by symbol
links up parts that are normally
earthed. Connect the appliances
appropriately using this terminal in
order to make sure that they are
equipotential.
General information
Check the grid characteristics against the
data indicated on the plate.
The identification plate bearing the
technical data, serial number and brand
name is visibly positioned on the appliance.
Do not remove this plate for any reason.
Perform the ground connection using a wire
that is 20 mm longer than the other wires.
The appliance is provided with a five-core
H07RN-F cable (5 x 1.5 mm² referring to
the cross section of the internal conductor).
Connection modes:
• 220-240 V 1N~
Use a 3 x 4 mm² three-core cable.
• 380-415 V 2N~
Use a 4 x 2.5 mm² four-core cable.
32
If the phase voltage drops below
190V~, the performance of the
oven may suffer, not due to the
product itself.
• 380-415 V 3N~
Use a 5 x 1.5 mm² five-core cable.
The values indicated above refer
to the cross-section of the internal
conductor.
Installation
Fixed connection
Fit the power line with an omnipolar circuit
breaker in compliance with installation
regulations.
The circuit breaker should be located near
the appliance and in an easily reachable
position.
Connection with plug and socket
Make sure that the plug and socket are of
the same type.
Avoid using adapters and shunts as these
could cause overheating and a risk of
burns.
Cable replacement
Power voltage
Danger of electrocution
• Disconnect the main power supply.
1. Unscrew the rear casing screws and
remove the casing to access the terminal
board.
2. Replace the cable.
3. Make sure that the cables follow the best
route in order to avoid any contact with
the appliance.
5.2 Positioning
Heavy appliance
Danger of crush injuries
• Position the appliance with the aid of a
second person.
Pressure on the open door
Risk of damages to the appliance
• Never use the open door to lever the
appliance into place when fitting.
• Avoid exerting too much pressure on the
oven door when open.
Heat production during appliance
operation
Risk of fire
• Veneers, adhesives or plastic coatings
on adjacent furniture should be
temperature-resistant (no less than
90°C).
Improper installation
Risk of damage to people
• The appliance support base should not
exceed a height of 160 mm from the
floor.
EN
Levelling
Level the appliance on the ground using the
adjustable feet. The foot has a range of 10
mm.
33
Installation
Steam outlet pipe
Depending on the model, there are two
exhaust flues on the back of the appliance
for releasing the steam produced during
cooking.
These must be left free of any
obstruction. Avoid crushing them.
Distances
Improper installation
Risk of damages to the appliance
• The appliances cannot be installed one
on top of the other without installing the
stack kit (on demand).
Place the appliance at a distance of at least
50 mm from any back wall and at 30 mm
from any side wall. Keep a minimum
distance of 50 mm between the appliances
in the case of installation of multiple and
adjacent appliances.
34
Loading...