Smeg PX140A Specifications Sheet

PX140A

Smeg 100cm gas cooktop, Linear design

EAN 8017709214258

Finish Stainless steel, Linear control knobs fitted

Size 58mmH x 1000mmW x 395mmD

Cutout 845mmW x 370mmD

Installation Built-in one-piece hob

Capacity Four gas burners —

Ignition Automatic electronic

Features Removable cast-iron pot stands

Warranty Two years parts and labour

PLEASE NOTE: this cooktop is designed to be installed into stone and composite
quartz-resin benchtops, or any heat-resistant material

1 x ultra-rapid burner (wok) 14.6 mj/hr
1 x auxiliary 4.7 mj/hr
1 x semi-rapid 6.1 mj/hr
1 x rapid 10.8 mj/hr

ULTRA-RAPID BURNER

This large and versatile burner suits the larger stock pots,
boilers, saucepans and griddles.

ELECTRONIC IGNITION

The cooktop is connected with a power cord of 1.3 metre
length to be plugged into a GPO located according to
installation needs below the benchline. This supplies a
continuous stored charge to spark the gas supply to the
individual burner of your choice.

FLAME FAILURE DEVICE

A flame failure device is fitted to all four burners. The FFD
ensures that should a flame be extinguished accidentally, the
gas supply to the specific burner(s) is stopped. For absolute
safety, the burner(s) can only be reignited by physically
resetting the control knob(s) to the OFF position and then
following normal ignition procedure. Simply depress and
turn the control of the desired cooking zone for almost instant
flame ignition.

LOW MAINTENANCE

The seamless hob design allows for easy wipe-over cleaning.
The control knobs are removable for cleaning access. Trivets,
burner assemblies and wok stand can be washed in warm
soapy water.

INSTALLATION

With a benchtop displacement of 75mm, the installation
underbench is possible of oven or drawers.

LINEAR DESIGN

The PX140A fits within the new Linear range of Smeg
appliances with complementing aesthetics.

smeg.com.au

ID160523